Garage
Shop

Marine Amplifiers for Boats A/B

Loading...
Filters

We are sorry, no available results!

Question Mark Icon of Question Mark
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Question Mark Icon of Question Mark
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Question Mark Icon of Question Mark

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Question Mark Icon of Question Mark
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

Question Mark Icon of Question Mark
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

Question Mark Icon of Question Mark
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Question Mark Icon of Question Mark
The lowest impedance the amplifier will handle when it is not bridged.
Question Mark Icon of Question Mark
The lowest impedance the amplifier will handle when it is bridged.
Question Mark Icon of Question Mark
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Question Mark Icon of Question Mark
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Question Mark Icon of Question Mark
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Question Mark Icon of Question Mark

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Question Mark Icon of Question Mark
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Question Mark Icon of Question Mark
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Shop the Category

filter-icon Filters & Sort

MTX WET75.4

200W Peak (100W RMS) Wet Series 4-Channel All Weather Class A/B Marine/Powersports Compact Amplifier

WET75.4 big
Go to item page Right Arrow Icon of Right Arrow

200W Peak (100W RMS) Wet Series 4-Channel All Weather Class A/B Marine/Powersports Compact Amplifier

• RMS Power: 75W x 4 @ 4 ohms, 100W x 4 @ 2 ohms
• Total Peak Power: 400W
• Plastic Cover Over Control-Adjustments
• Dimensions: 12.15"W x 6.40"L x 2.25"H

shipping truck icon
FREE 2-day shipping to VA. Get it Sat, Mar. 30

empty

Was $299.95 Details
$269.95

In stock

WET75.4 small

Item added to your cart.

Price: $269.95

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva BAK44BL

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC44X helps you easily integrate with your factory or aftermarket system

$149.99

$64.99

Add to cart
NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

$44.99

$20.99

Add to cart
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$32.99

$15.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

MTX Audio WET75.2

400W Peak (200W RMS) Wet Series Class AB Bridgeable 2-Channel Marine Amplifier

WET75.2 big
Go to item page Right Arrow Icon of Right Arrow

400W Peak (200W RMS) Wet Series Class AB Bridgeable 2-Channel Marine Amplifier

• RMS Power: 75W x 2 @ 4 ohms, 100W x 2 @ 2 ohms, Bridged, 200 watts x 1 chan
• Total Peak Power: 400W
• Weather Resistant in Accordance with IP55 Rating
• Dimensions: 7.90"W x 6.40"L x 2.25"H

Get a FREE Amp Kit at Checkout!Shop the deal
shipping truck icon
FREE 2-day shipping to VA. Get it Sat, Mar. 30

empty

Was $279.95 Details
$249.95

In stock

Only 1 Left!

• RMS Power: 75W x 2 @ 4 ohms, 100W x 2 @ 2 ohms, Bridged, 200 watts x 1 chan
• Total Peak Power: 400W
• Weather Resistant in Accordance with IP55 Rating
• Dimensions: 7.90"W x 6.40"L x 2.25"H

WET75.2 small

Item added to your cart.

Price: $249.95

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
Stinger SS1200XS

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$119.00

$52.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$18.99

$12.99

Add to cart
NVX XWS1625 Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

$19.99

Add to cart
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$24.99

$12.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart
    clear all

    FAQ Frequently asked questions in Marine Amplifiers for Boats A/B


    Marine Amplifiers Frequently Asked Questions (FAQ)
    Marine amplifiers are specifically designed and engineered to withstand the harsh marine environment. Unlike regular car amplifiers, marine amps are built with corrosion-resistant materials, sealed circuit boards, and weatherproof coatings to protect against moisture, saltwater, and UV rays. They undergo rigorous testing to ensure they can handle the challenges of marine use. These amplifiers are essential for boats as they provide high-quality sound while enduring exposure to water and other elements. When shopping for marine amplifiers, always look for products labeled as ""marine-grade"" or ""water-resistant"" to guarantee optimal performance and longevity in marine conditions.
    It is not recommended to use a regular car amplifier in a boat. Marine environments present unique challenges such as water splashes, humidity, and salt exposure, which can damage standard car amplifiers designed for dry, land-based use. Regular amplifiers lack the necessary protective features to withstand these conditions. Using a non-marine amplifier in a boat may lead to corrosion, malfunction, and ultimately, failure of the unit. To ensure reliable and safe performance, investing in a marine-specific amplifier is crucial. Marine amplifiers are engineered with water and corrosion-resistant components, ensuring they can withstand the demanding marine environment without compromising audio quality.
    The power rating you need for your marine amplifier depends on the speakers and subwoofers in your boat and your desired audio output. To determine the appropriate power rating, consider the RMS (root mean square) wattage of your speakers and subwoofers. Match the amplifier's RMS output to the RMS rating of your speakers and subwoofers for optimal performance. It's essential to avoid underpowering or overpowering your speakers, as both scenarios can lead to audio distortion or damage to the speakers. Additionally, consider the number of channels required, especially if you plan to power separate speakers and a subwoofer. Sonic Electronix offers a wide selection of marine amplifiers with varying power ratings and channel configurations to meet your boat's specific audio needs.
    While some experienced boat owners with a good understanding of electrical systems may be able to install a marine amplifier themselves, it's recommended to seek professional help to ensure a proper and safe installation. Marine amplifier installation requires knowledge of both marine electrical systems and audio connections. Professional installers understand the unique challenges of marine installations and can ensure all connections are securely waterproofed and properly sealed. They also have the expertise to optimize the amplifier's performance and safeguard your boat's electrical system. If you're unsure about the installation process or lack experience with marine electronics, it's best to have a certified marine audio installer handle the job.
    To protect your marine amplifier from water damage and corrosion, consider the following precautions: Install the amplifier in a dry, well-ventilated location away from direct exposure to water. Use marine-grade wiring and connectors to ensure proper waterproofing of all connections. Apply silicone or marine-grade sealant to all openings and gaps in the amplifier's housing. Utilize a marine amplifier cover when the boat is not in use to protect the unit from rain and splashes. Regularly inspect and clean the amplifier's exterior to remove any salt, dirt, or debris that may cause corrosion. Consider investing in a marine-grade amplifier with a protective coating and sealed circuitry to enhance durability. By following these precautions, you can extend the lifespan of your marine amplifier and enjoy superior audio performance on your boat for years to come.

    All About Marine Amplifiers for Boats A/B


    Marine Amplifiers for Boats

    Marine amplifiers are the tried and true way to amp up your audio system’s volume. 

    In the water, it’s important that you have enough power to drown out background noises. A marine amplifier will provide enough power to your music without shorting the battery and leaving the boat stranded. 

    Marine speakers and marine subwoofers are built for outdoor application. They can withstand light rain, moisture and damaging sun rays. Marine audio amplifiers protect your audio system’s power from moisture and humidity with gasket-sealed covers for the top-mounted controls and endcaps. 

    The marine amps feature rubber caps to cover the RCA inputs, silicone boots to shield the fuses, and their circuit boards have corrosion-deterring conformal coating. 

    Sonic Electronix carriesmarine amplifiers in monoblock, 2-channel, 4-channel and 5-channel models. 

    Sonic Electronix Learning Center: Marine

    If you're in search of the best quality marine amplifiers that can withstand the challenges of the marine environment while delivering exceptional audio performance, look no further. Our extensive collection features only the finest marine amplifiers to ensure you enjoy an unparalleled audio experience while cruising on your boat.

    Marine amplifiers for boats are specifically engineered to thrive in the harsh conditions of the marine environment. These amplifiers are designed to resist moisture, saltwater, and UV exposure, making them highly durable and reliable for marine applications. When you invest in a marine amplifier, you can trust that it will endure the rigors of boat life, providing you with a consistent and high-quality audio performance for years to come.

    One of the primary advantages of having a marine amplifier on your boat is the significant enhancement in sound quality. Marine amplifiers deliver robust and clean power to your boat's speakers, ensuring that you can enjoy your favorite music, podcasts, or radio stations with crystal-clear sound, even while navigating rough waters or entertaining on deck.

    Furthermore, marine amplifiers are built to power marine-grade speakers, subwoofers, and other audio components designed for the marine environment. This synergy between the amplifier and marine speakers allows for optimal sound reproduction, creating an immersive audio experience that will elevate your boating adventures.

    Aside from providing excellent audio quality, marine amplifiers are also engineered to be space-efficient and easy to install on boats. Their compact and rugged designs enable seamless integration into your boat's audio system, making the installation process straightforward, whether you're a seasoned boating enthusiast or a first-time DIYer.

    At Sonic Electronix, we are dedicated to helping you find the best marine amplifiers for your boat. Our team of marine audio experts is here to offer personalized guidance and assistance throughout your shopping experience. Whether you need advice on selecting the right marine amplifier for your boat's audio setup or have questions about compatibility, feel free to reach out to us at 1-502-200-8010. Our knowledgeable staff is always ready to provide the information you need and ensure you find the perfect marine amplifier to enhance your boating adventures.

    ADVERTISEMENT
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    ADVERTISEMENT
    Save up to 10 different vehicles in your garage

    Loading...
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon