Expert Service 1-877-289-7664 [Hours]

Monoblock Amplifiers Monoblock Amplifiers, Total Peak Power Output: 1001 - 2000 watts

1500W Monoblock Torque Series Class AB Amplifier

• RMS Power: 750W x 1 @ 4 ohms
• Total Peak Power: 1500W
• Variable Low Pass Filter
• Dimensions: 9.5" W x 10.2" L x 2.125" H

$69.95

OUT OF STOCK

1600W Max Nano Block Series Monoblock Class D Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 800W x 1 @ 1 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Selectable Bass Boost: 0, +6, +12 dB
• Class D Circuitry
• Dimensions: 7-1/4"L x 5-1/2"W x 2-1/8"H

$159.99

OUT OF STOCK

2000W Monoblock Powerzone Series Class AB Car Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total Peak Power: 2000W
• Rugged MOSFET Pulse Width Modulation Power Supply

$129.95

OUT OF STOCK

1500W Monoblock Ground Pounder Series Class A/B Amplifier

• RMS Power: 750W x 1 @ 4 ohms, 1500W x 1 @ 2 ohms
• Total Peak Power: 1500W
• Variable Bass Boost
• Speaker Level Inputs
• 9.05"W x 14.72"L x 2.29"H

$99.99

OUT OF STOCK

D-Series 1000W Monoblock Class D Car Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 12-1/16" W x 7-3/16" D x 2-3/8" H

$329.95

OUT OF STOCK

2000W Max Pro Series Class D Monoblock Subwoofer Amplifier w/ Remote Level Control

• 2000W x 1-Chan. @ 1 Ohms Max
• 1200W x 1-Chan. @ 2 Ohms
• Variable Bass Boost Control
• Speaker-Level Inputs
• Glass/Epoxy Printed Circuit Board
• 0/180 Phase Selector

$109.95

OUT OF STOCK

2000W APSM Series Monoblock Class D Car Amplifier

• RMS Power: 900W x 1 @ 4 ohms, 1400W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total Peak Power: 2000W
• Variable Low-Pass Filter (40-180 Hz)
• Dimensions: 6"W x 16.5"L x 2"H

$198.99

OUT OF STOCK

1400W Monoblock SA Series Class D Amplifier

• RMS Power: 200W x 1 @ 4 ohms, 300W x 1 @ 2 ohms, 700W x 1 @ 1 ohm
• Total Peak Power: 1400W
• Variable Low Pass Filter
• Dimensions: 4.72" W x 9.05" L x 1.57" H

$215.99

OUT OF STOCK

1800W Max, Monoblock Class D Mini Max Series Amplifier

• RMS: 350W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 900W x 1 @ 1 ohm
• Peak: 700W x 1 @ 4 ohms, 1200W x 1 @ 2 ohms, 1800W x 1 @ 1 ohm
• Class D Circuitry
• Bass Boost: 0-18 dB at 45 Hz
• Wired Bass Remote Control Included
• Dimensions: 8-1/9"W x 6-3/10 "L x 2-1/9"H

$139.99

OUT OF STOCK

Monoblock GTO Series Class D Car Amplifier

• RMS: 500W x 1 @ 4 ohms, 750W x 1 @ 2 ohms
• Total RMS Power: 750W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +12 dB
• Class D Circuitry
• Dimensions: 9-11/16"W x 12"L x 2-5/8"H

$299.95

OUT OF STOCK

900W RMS Class AB Monoblock Reaper Series Car Power Amplifier

• Peak: 650W x 1 @ 4 ohms, 900W x 1 @ 2 ohms
• Total Peak Power: 2000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 9"W x 11-3/4"D x 2-1/2"H

$99.99

OUT OF STOCK

800W Monoblock Nono BiT Series Class D Car Amplifier


• Total Peak Power: 1600W
• Variable Low-Pass Filter (10-220 Hz, 24 dB/Octave)
• Dimensions: 5"W x 8.3"L x 1.8"H

$169.99

OUT OF STOCK

1000W RMS Power Series Constant Power Monoblock Class BD Amplifier

• RMS: 700W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 13-11/16"L x 8-3/16"W x 2-3/16"H

$699.99

OUT OF STOCK

2000W Max Monoblock MINI D Mono Compact Car Amplifier

• RMS: 650W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• Mini Class D Design
• Bass Boost: 0-12 dB at 50 Hz
• Wired Bass Remote Control Included
• Dimensions: 6-5/16"W x 12-5/16"L x 1-7/8"H

$229.99

OUT OF STOCK

1200W RMS, Monoblock Class D, HD Series Small Profile Car Amplifier with R.I.P.S. Technology

• RMS: 1200W x 1 @ 4 ohms, 1200W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• R.I.P.S. - Regulated, Intelligent Power Supply
• Single Cycle control - High Fidelity Class D
• 1 Pair of Buffered Preamps RCA Outputs
• Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H

$999.95

OUT OF STOCK

1200W Max, Auto Sound Series Class D Monoblock Amplifier (ASA600.1DX) + Belva Amp Kit

• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7

$149.99

OUT OF STOCK

1150W Class AB Monoblock SQ Series Car Amplifier

• RMS: 180W x 1 @ 4 ohms, 250W x 1 @ 2 ohms, 400W x 1 @ 1 ohm
• Total Peak Power: 1150W
• CEA-2006 Compliant/Preamp Outputs/LPF
• Wired remote bass level control included
• Heavy duty aluminum alloy heat-sink
• Dimensions: 9.6"W x 11.8" L x 2.2" H

$169.99

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.