Expert Service 1-877-289-7664 [Hours]

Presidents' Day Clearance
Amp up your factory system with quality car amplifiers. Find a large selection of monoblock amps including Class D, mini amps, micro amps and other car amps for subwoofers. Shop now!
Narrow Your Results

300W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Save 25% on a Complete 8 Gauge Amp Kit!

$129.95

IN STOCK

1000W Monoblock PZX Series Class AB Amplifier

• 500 Watts MAX x 1 @ 4 ohms
• 1000 Watts MAX x 1 @ 2 ohms
• Wired remote bass level control included
• SEPP (Single Ended Push Pull) A/B Class Amplifier Designs
• Dual speaker terminals simplify the hookup of multiple speakers
• Variable subsonic filter: 10 - 40 Hz
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$89.97

IN STOCK

500W RMS Class D 1-Channel Monoblock Performance Series Car Power Amplifier

• RMS: 300 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 9-7/16"W x 7-9/16"L x 2-3/16"H

Get 20% off an NVX Universal Remote Level Control!

$119.99

IN STOCK

1000W Monoblock Ground Pounder Class A/B Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Variable Bass Boost
• Total Peak Power: 1000W
• 9.05"W x 13.93"L x 2.29"H

$79.99

IN STOCK

Only 3 Left!

500W RMS Class D 1-Channel Monoblock Power Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 3-Way Protection Circuitry
• Selectable Bass Boost (0-6-12 dB)
• Class D Circuitry
• Dimensions: 6-5/16"W x 8-15/16"L x 2-1/4"H

VIP Guarantee - FREE 2-Day Shipping,
10% Rewards, Extended Warranty and more!

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$179.95

IN STOCK

1000W Max 1 Channel Monoblock Volt Series Class A/B Car Amplifier

• 250W RMS @ 4 ohms
• 355W RMS @ 2 ohms
• MOSFET Power Supply
• Variable Low-Pass Filter
• Built-In Subsonic Filter
• Variable Bass Boost
• 4-Way Protection Circuitry
• CEA-2006 Compliant

Get 20% off an NVX Universal Remote Level Control!

$119.00

IN STOCK

Only 2 Left!

770W GTX Series Monoblock Amplifier

• RMS: 350W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 770W
Bare wire-to-RCA adapters included
• Signal sensing turn-on
• Signal to Noise Ratio: > 80 dB
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)

VIP Guarantee - FREE 2-Day Shipping,
10% Rewards, Extended Warranty and more!

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$199.95

IN STOCK

Only 1 Left!

1000W Monoblock Momentum CSA Series Class AB Amplifier

• RMS: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms,
• Total Peak Power: 1000W
• High Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors for Smooth Audio Response
• Preamp RCA outputs to daisy chain multiple amps
• 8.00" W x 11.50" L x 2.00" H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$89.95

IN STOCK

Only 1 Left!

700W Max Monoblock Stealth Series Marine Grade Class D Amplifier

• RMS: 250 Watts x 1 @ 4 ohms
• 350 Watts x 1 @ 2 ohms
• Total Peak Power: 700 Watts
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• Dash Mount Gain Control Module Included

$114.99

IN STOCK

350W Monoblock Digital Low Profile Series Class D Car Amplifier (Made in Korea)

• RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Total Peak Power: 400W
• Pulse Width Modulated MOSFET Power Supply
• 4-Way Protection Circuitry
• Dimensions: 3"W x 5.9"L x 1.5"H

Get 20% off an NVX Universal Remote Level Control!

$89.95

IN STOCK

Audiopipe TS-PP2-12-D4 1000W 12" Car Subwoofer + Kicker CX300.1 300W RMS, Class D Monoblock Amplifier

• Peak Power: 1000W
• RMS Power: 300W
• Polypropylene Cone
• Rubber Surround
• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz

$174.94

IN STOCK

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

VIP Guarantee - FREE 2-Day Shipping,
10% Rewards, Extended Warranty and more!

25% Off of XKIT42 OFC Amplifier Install Kit with Purchase!

$299.95

IN STOCK

Only 1 Left!

650W Class D Monoblock Amplifier

• RMS: 350 x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Total RMS Power: 650W
• Class D Circuitry
• Bass Boost: 0 - 12 dB at 45 Hz
• Wired Bass Remote Included
• Dimensions: 5.375"W x 10"L x 1.875"H

50% off an 8 Gauge Amp Kit with Select Amplifiers Purchase!

$149.99

IN STOCK

Only 2 Left!

D-Series 500W Monoblock Class D Car Amplifier

• RMS Power: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$229.95

IN STOCK

Only 3 Left!

VSW122V2 600W 12" VS-Series V2 Dual 2-ohm Car Sub with PDX-1000.2 1000W Max 2-Ch PDX Series Amp and BAK82BL Complete 8G Amp Wiring Kit

• 600W 12" VS-Series Version 2 Dual 2-ohm Car Subwoofer
• 1000W Max 2-Channel Class A/B PDX Series Car Amplifier
• Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)

$181.99

IN STOCK

400W Excelon Series Monoblock Class D Car Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Variable Low-Pass Filter (50-200 Hz, 24 dB/octave)
• CEA-2006 Compliant
• Dimensions: 8-11/16"W x 1-7/16"L x 8"H

Get 20% off an NVX Universal Remote Level Control!

$219.99

IN STOCK

Only 2 Left!

1000W Monoblock Bomber Series Class D Amplifier

• RMS: 300 Watts x 1 @ 4 ohms, 500 Watts x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis

$209.99

IN STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.