Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!
Narrow Your Results

Your Filters

Clear All
Availability
Total RMS Power Output
Minimum Impedance Unbridged
2
Price range:
$61.95 $429.99
$
to
$

Amplifier Class:

Number of Channels:

Minimum Impedance Bridged:

CEA-2006 Compliant:

Maximum Input Gauge Size:

Promotions:

Monoblock Amplifiers Total RMS Power Output: 251 - 500 watts, Minimum Impedance Unbridged: 2 ohms

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)

• Incredibly Tiny! The size of a postcard!
• RMS: 200 x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total RMS Power: 300W
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

Save 25% on a Complete 8 Gauge Amp Kit!

$159.99

IN STOCK

500W True RMS, 1-Channel Monoblock Amplifier with Digital Input Mixer and Graphical Status Display

• RMS: 500 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H

25% Off NVX XKIT42 4 gauge amp kit with Purchase!

$229.99

IN STOCK

500W RMS Monoblock Single Channel Class D Prime Series Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Punch Bass: 0 to +12 dB
• Class D Circuitry
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

25% off a 4 Gauge Amp Kit with Purchase

$149.95

IN STOCK

500W RMS Class D 1-Channel Monoblock Performance Series Car Power Amplifier

• RMS: 300 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 9-7/16"W x 7-9/16"L x 2-3/16"H

25% off a 4 Gauge Amp Kit with Purchase

$119.99

IN STOCK

500W V-Power Series Class D Monoblock Digital Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

20% Off XS Power Battery with Purchase of Select Amplifiers!

$169.99

IN STOCK

300W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Free Gift: 1.0 Farad Capacitor with Amp Purchase!

$149.95

IN STOCK

500W RMS Class D 1-Channel Monoblock Power Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 3-Way Protection Circuitry
• Selectable Bass Boost (0-6-12 dB)
• Class D Circuitry
• Dimensions: 6-5/16"W x 8-15/16"L x 2-1/4"H

$179.95

IN STOCK

270W Max, Sedona Series 1-Channel Monoblock Amplifier

• RMS: 170W x 1 @ 4 ohms, 270W x 1 @ 2 ohms
• Total RMS Power: 270W
• Brushed Aluminum Finish
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/3L x 9-1/2W x 2-1/3H

50% off NVX 2-Channel RCA Cables w/ purchase!

$69.95

IN STOCK

300W RMS Punch Series Monoblock Class AB Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total RMS Power: 300W
• Built-in NOMAD Circuit Protects Amplifier
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H

25% off a 4 Gauge Amp Kit with Purchase

$159.99

IN STOCK

450W RMS Axis Series Class AB Monoblock Car Amplifier

• RMS: 450W x 1 @ 4 ohms
• Total Peak Power: 1500W
• Wired Bass Knob Included
• Switchable Bass Boost: 0 or +18 dB at 50 Hz
• High-Level Inputs
• Dimensions: 10-5/8"W x 9-7/16"D x 2-7/16"H

$61.95

AVAILABLE

Ships at Later Date

900W Max Power Series Class AB Monoblock Amplifier with Black Gloss Finish

• RMS: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 3600W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• High Current Bi-Polar Transistors
• Dimensions: 9"D x 15-3/4"W x 2-1/2"H

25% off a 4 Gauge Amp Kit with Purchase

$84.99

IN STOCK

450W RMS Single-Channel Monoblock iON Series Class D Full-Range Digital Stereo Bridgeable Amplifier

• RMS: 260 x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total RMS Power: 450W
• Class D Circuitry
• Bass Boost: 0 - 12 dB at 45 Hz
• Wired Bass Remote Included
• Dimensions: 5-5/16"W x 8"L x 1-11/16"H

50% off NVX 2-Channel RCA Cables w/ purchase!

$99.99

IN STOCK

400W RMS Punch Series Monoblock Class AB Car Power Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total RMS Power: 400W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H

25% off a 4 Gauge Amp Kit with Purchase

$209.99

IN STOCK

Only 2 Left!

400W RMS XR Series Monoblock Class AB Power Amplifier

• 400W x 1-Chan. @ 2 Ohms • 280W x 1-Chan. @ 4 Ohms • Built-In Ground Loop Isolation For RCA Inputs • Remote Turn-On With Soft Start Prevents "Thump" • Speaker-Level Inputs

$119.99

IN STOCK

Only 3 Left!

1000W Max 1 Channel Monoblock Volt Series Class A/B Car Amplifier

• 250W RMS @ 4 ohms
• 355W RMS @ 2 ohms
• MOSFET Power Supply
• Variable Low-Pass Filter
• Built-In Subsonic Filter
• Variable Bass Boost
• 4-Way Protection Circuitry
• CEA-2006 Compliant

25% off a 8 Gauge Amp Kit with Purchase

$119.00

IN STOCK

Only 2 Left!

500W RMS Monoblock eXcelon Series Class D Digital Power Amplifier

• 4 ohms: 300 watts x 1 chan. • 2 ohms: 500 watts x 1 chan. • Max power output: 1000 watts x 1 chan. • • Mono Channel Operation

$134.99

IN STOCK

D-Series 500W Monoblock Class D Car Amplifier

• RMS Power: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Save 50% on a Matching Kicker Amp Kit

$229.95

IN STOCK

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

25% off a 4 Gauge Amp Kit with Purchase

$279.95

IN STOCK

Only 3 Left!

300W Single-Channel Class D XD Series Subwoofer Monoblock Car Amplifier

• 300W x 1-Chan @ 2 Ohms
• NexD Ultra-High Speed Topology
• Preamp RCA Outputs
• Variable High/Low-Pass Filter
• 3-Way System Protection Circuitry
• Remote Bass Input

Save 50% on the NVX Bass Expanding Processor w/ Purchase!

$275.95

IN STOCK

Only 3 Left!

900W Atom Series Monoblock Class D Car Amplifier

• RMS Power: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 900W
• Variable Low-Pass Filter (35-250 Hz, 24 dB/octave)
• Dimensions: 5"W x 7.2"L x 1.5"H

$149.99

IN STOCK

Only 3 Left!

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.