Expert Service 1-877-289-7664 [Hours]

Presidents' Day Clearance
Amp up your factory system with quality car amplifiers. Find a large selection of monoblock amps including Class D, mini amps, micro amps and other car amps for subwoofers. Shop now!
Narrow Your Results

Your Filters

Clear All
Total Peak Power Output
Minimum Impedance Bridged
Price range:
$32.99 $1599.95
$
to
$

Number of Channels:

Minimum Impedance Unbridged:

Sonic Certified Amplifier:

CEA-2006 Compliant:

Amp Bluetooth Connectivity:

Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display

• RMS: 500 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H

Get 20% off an NVX Universal Remote Level Control!

$199.99

IN STOCK

500W RMS Prime Series Class D Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$119.99

IN STOCK

500W RMS Prime Series Class D Monoblock Amplifier + 4 Gauge Full Spec CCA Amplifier Wiring Kit for Systems up to 650 Watts

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

$152.97

IN STOCK

1000 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier

• 4 ohms: 475 watts x 1 chan.
• 2 ohms: 750 watts x 1 chan.
• 1 ohms: 1000 watts x 1 chan.
• Wired HFR-3 remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• Frequency Response: 15 - 250 Hz
• Signal to Noise Ration: >95 dB
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$129.99

IN STOCK

2000 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 2000 Watt)

• RMS: 700W x 1 @ 4 ohms, 1400W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H

25% Off of XKIT42 OFC Amplifier Install Kit with Purchase!

$199.99

IN STOCK

1500 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier (HFi 1500D)

• 4 ohms: 500 watts x 1 chan.
• 2 ohms: 1000 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan.
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$149.99

IN STOCK

1200W RMS Prime Series Monoblock Class D Car Amplifier

• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Class D Circuitry
• Dimensions: 6-3/4"L x 11-1/16"W x 2"H

Get 10% off a Rockford Fosgate Hybrid 1.0 Farad Capacitor!

$239.99

IN STOCK

1500W Consumer Line Series Monoblock Class D Amplifier

• RMS Power: 600W x 1 @ 4 ohms, 950W x 1 @ 2 ohms
• Total Peak Power: 1500W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 6.9" W x 14" L x 2.16" H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$161.97

IN STOCK

Only 2 Left!

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

• RMS: 580W x 1 @ 4 ohms, 725W x 1 @ 2 ohms 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$158.99

IN STOCK

1500 Watt Monoblock Brutus Series Super Class D 1-Ohm Stable Subwoofer Amplifier - (Brutus 1500 Watt)

• RMS Power: 550W x 1 @ 4 ohms, 900W x 1 @ 2 ohms, 1500W x 1 @ 1 ohm
• Total Peak Power: 1500W
• Wired remote bass level control included
• Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
• 1-Ohm Stable operation
• Variable Bass Boost: 0 to +10 dB
• Variable Low Pass Filter
• Dimensions: 9.8" W x 12.5" L x 2.4" H

15% Off of XKIT42 OFC Amplifier Install Kit with Purchase!

$174.99

IN STOCK

(2) RE Audio SEXv2-12D4 12" SE-X v2 Series Dual 4 ohm Subwoofer + Hifonics HFi1500D 1500W RMS Class D Monoblock HFi Series Amplifier

• 1 ohms: 1500 watts x 1 chan.
• Rubatek Foam Surround
• Dual Composite 2-Piece Cone
• Tork-Tite Terminals
• Progressive Spiders
• Double Stacked Magnets
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

$510.22

IN STOCK

650W Monoblock iON Series Class D Digital Amplifier

• RMS: 400 x 1 @ 4 ohms, 650W x 1 @ 2 ohms
• Total RMS Power: 650W
• Class D Circuitry
• Bass Boost: 0 - 12 dB at 45 Hz
• Wired Bass Remote Included
• Dimensions: 5-5/16"W x 9"L x 1-11/16"H

Save 15% on a 4 Gauge Amp Kit with Purchase!

$108.99

IN STOCK

200W Monoblock Chaos Epic Series Class AB Amplifier

• RMS Power: 75W x 1 @ 4 ohms, 150W x 1 @ 2 ohms
• Total Peak Power: 200W
• Variable Low Pass Filter
• Dimensions: 4" W x 3.125" L x 1.625" H

Get 20% off an NVX Universal Remote Level Control!

$32.99

IN STOCK

1500W Monoblock APMI Mini Series Class D Amplifier

• RMS: 540W x 1 @ 4 ohms, 964W x 1 @ 2 ohms, 1414W x 1 @ 1 ohm
• Mini Design Class D Mosfet Amplifier
• Variable Bass Boost with Selectable Frequency
• Wired remote bass level control included
• 6.49" W x 13.44" L x 2.20" H

$135.97

IN STOCK

1200W RMS PA D Series Class-D Monoblock Car Amplifier

• 500 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• Wired remote bass level control included
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
• Dimensions: 6-3/4" W x 12-15/16" L x 1-13/16" H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$224.99

IN STOCK

1000W RMS Punch Series Monoblock Class BD Car Power Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H

Save 10% on an RF Amp Kit and get an Extended Warranty!

$389.99

IN STOCK

750W RMS Class D Monoblock Prime Series Car Audio Amplifier

• RMS: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 750W x 1 @ 1 ohm
• Total RMS Power: 750W
• CEA-2006 Compliant
• Punch Bass: 0 to +12 dB
• Class D Circuitry
• Dimensions: 6-11/16"L x 9-1/8"W x 2"H

Get 10% off a Rockford Fosgate Hybrid 1.0 Farad Capacitor!

$229.99

IN STOCK

600W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 200W x 1 @ 4 ohms, 350W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILCâ„¢ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

VIP Guarantee - FREE 2-Day Shipping,
10% Rewards, Extended Warranty and more!

FREE True 4 Gauge OFC Amplifier Install Kit with Purchase!

$499.99

IN STOCK

Only 1 Left!

Tested at 622W RMS on our Amp Dyno! (Rated 600W by Image Dynamics) High Fidelity Q Series Monoblock Car Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H

$149.99

IN STOCK

200W Class A/B 2-8 Ohm Stable Monoblock Amplifier

• Total Peak Power: 200W
• Variable Low-Pass Filter (50-250 Hz, 24 dB/octave)
• Dimensions: 1.625"W x 4"L x 3.125"H

Get 20% off an NVX Universal Remote Level Control!

$39.99

IN STOCK

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.