Garage
Shop

5-Channel, 6-Channel & 8-Channel Amplifiers 1 pair

Loading...
Filters

We are sorry, no available results!

Question Mark Icon of Question Mark
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Question Mark Icon of Question Mark
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Question Mark Icon of Question Mark

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Question Mark Icon of Question Mark
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

Question Mark Icon of Question Mark
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

Question Mark Icon of Question Mark
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Question Mark Icon of Question Mark
The lowest impedance the amplifier will handle when it is not bridged.
Question Mark Icon of Question Mark
The lowest impedance the amplifier will handle when it is bridged.
Question Mark Icon of Question Mark
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Question Mark Icon of Question Mark
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Question Mark Icon of Question Mark
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Question Mark Icon of Question Mark

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Question Mark Icon of Question Mark
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Question Mark Icon of Question Mark
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Shop the Category

filter-icon Filters & Sort
Lowest price in 30 days

JL Audio RD900/5

900W RMS RD Series Class-D 5-Channel Amplifier

RD900/5 big
Go to item page Right Arrow Icon of Right Arrow

900W RMS RD Series Class-D 5-Channel Amplifier

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21
VIP Star Icon

VIP Product Get $66.00 in rewards to spend later

empty

3
Was $699.99 Details
$659.99

In stock

Only 2 Left!

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel-Channel Amplifier

RD900/5 small

Item added to your cart.

Price: $659.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

JL Audio HD900/5

900W RMS HD Series Class-D 5-Channel Amplifier

HD900/5 big
Go to item page Right Arrow Icon of Right Arrow

900W RMS HD Series Class-D 5-Channel Amplifier

• 4 ohms: 100 watts x 4 channel + 500 watts x 1 channel
• 3 to 1.5 ohms: 75 watts x 4 channel + 500 watts x 1 channel
• Bridged: 150 watts x 2 channel @ 4 to 8 ohms + 500 watts x 1 channel @ 4 to 1.5 ohms
• Total RMS Power: 900 watts
• Class D 1.5 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21
VIP Star Icon

VIP Product Get $150.00 in rewards to spend later

empty

23
$1,499.99

In stock

Only 3 Left!

HD900/5 small

Item added to your cart.

Price: $1499.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
JL Audio HD-RLC

Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers

$54.99

$54.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
JL Audio HD Stack Kit

Stacking Hardware for Two JL Audio HD / MHD Amplifiers

$49.99

$49.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

Infinity Kappa Five

2300W Peak (750W RMS) Kappa Series Class-D 5-Channel Amplifier with Bass Remote

Kappa Five big
Go to item page Right Arrow Icon of Right Arrow

2300W Peak (750W RMS) Kappa Series Class-D 5-Channel Amplifier with Bass Remote

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 350 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 350 watts x 1 channel @ 2 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21
VIP Star Icon

VIP Product Get $29.00 in rewards to spend later

empty

12
Was $739.95 Details
$289.95

In stock

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 350 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 350 watts x 1 channel @ 2 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 5-Channel Amplifier

Kappa Five small

Item added to your cart.

Price: $289.95

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva BAK06

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 6-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED

$94.98

$53.98

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

Cerwin Vega CVP2500.5D

2500W Peak (660W RMS) CVP Series Class-AB 5-Channel Amplifier with Bass Remote

CVP2500.5D big
Go to item page Right Arrow Icon of Right Arrow

2500W Peak (660W RMS) CVP Series Class-AB 5-Channel Amplifier with Bass Remote

• 65 watts x 4 channel + 185 watts x 1 channel @ 4 ohms
• 85 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 180 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 660 watts
• Class A/B 2 ohms Stable 5-Channel Amplifier

Buy More, Save MoreView Terms
shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21

empty

4
Was $249.99 Details
$239.99

In stock

CVP2500.5D small

Item added to your cart.

Price: $239.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva BAK46

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$89.99

$44.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

JL Audio VX1000/5i

1000W RMS VXi Series Class-D 5-Channel Amplifier with Digital Signal Processing (DSP)

VX1000/5i big
Go to item page Right Arrow Icon of Right Arrow

1000W RMS VXi Series Class-D 5-Channel Amplifier with Digital Signal Processing (DSP)

• 75 watts x 4 channel + 400 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 600 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21
VIP Star Icon

VIP Product Get $160.00 in rewards to spend later

empty

1
$1,599.99

In stock

Only 1 Left!

VX1000/5i small

Item added to your cart.

Price: $1599.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart

Memphis PRX800.5V2

800W RMS Power Reference Series Class-D 5-Channel Amplifier

No picture
Go to item page Right Arrow Icon of Right Arrow

800W RMS Power Reference Series Class-D 5-Channel Amplifier

• 75 watts x 4 channel + 250 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel + 400 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 400 watts x 1 channel @ 2 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21

empty

Was $639.95 Details
$499.95

In stock

Only 2 Left!

• 75 watts x 4 channel + 250 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel + 400 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 400 watts x 1 channel @ 2 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 5-Channel Amplifier

No picture

Item added to your cart.

Price: $499.95

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Limited time!

Boss Elite BE2200.5D

2200W Peak (900W RMS) Elite Series 5-Channel Class-D Amplifier

BE2200.5D big
Go to item page Right Arrow Icon of Right Arrow

2200W Peak (900W RMS) Elite Series 5-Channel Class-D Amplifier

• 113 watts x 4 channel @ 4 ohms
• 225 watts x 4 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21

empty

Was $279.99 Details
Save $70.00
$209.99

In stock

Only 1 Left!

• 113 watts x 4 channel @ 4 ohms
• 225 watts x 4 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel Amplifier

BE2200.5D small

Item added to your cart.

Price: $209.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva BAK46

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$89.99

$44.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

JL Audio MHD900/5

900W RMS MHD Series Class-D 5-Channel Marine Amplifier

MHD900/5 big
Go to item page Right Arrow Icon of Right Arrow

900W RMS MHD Series Class-D 5-Channel Marine Amplifier

• 4 ohms: 100 watts x 4 channel + 500 watts x 1 channel
• 3 to 1.5 ohms: 75 watts x 4 channel + 500 watts x 1 channel
• Bridged: 150 watts x 2 channel @ 4 to 8 ohms + 500 watts x 1 channel @ 4 to 1.5 ohms
• Total RMS Power: 900 watts
• Class D 1.5 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21
VIP Star Icon

VIP Product Get $160.00 in rewards to spend later

empty

2
$1,599.99

In stock

Only 1 Left!

MHD900/5 small

Item added to your cart.

Price: $1599.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
JL Audio HD-RLC

Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers

$54.99

$54.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
JL Audio HD Stack Kit

Stacking Hardware for Two JL Audio HD / MHD Amplifiers

$49.99

$49.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

Hertz ML Power 5

950W RMS Mille Series Class-D 5-Channel Amplifier

ML Power 5 big
Go to item page Right Arrow Icon of Right Arrow

950W RMS Mille Series Class-D 5-Channel Amplifier

• 70 watts x 4 channel + 380 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 550 watts x 1 channel @ 2 ohms
• Total RMS Power: 950 watts
• Class D 2 ohms Stable 5-Channel Amplifier

Buy More, Save MoreView Terms
shipping truck icon
FREE 2-day shipping to VA. Get it Thu, Mar. 21

empty

Was $1055.00 Details
$879.99

In stock

Only 1 Left!

• 70 watts x 4 channel + 380 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 550 watts x 1 channel @ 2 ohms
• Total RMS Power: 950 watts
• Class D 2 ohms Stable 5-Channel Amplifier

ML Power 5 small

Item added to your cart.

Price: $879.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart

Cerwin Vega SRPM1100.5D

980W RMS Stroker RPM Series Class-D 5-Channel Marine Amplifier with Bass Remote

SRPM1100.5D big
Go to item page Right Arrow Icon of Right Arrow

980W RMS Stroker RPM Series Class-D 5-Channel Marine Amplifier with Bass Remote

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohms
• 120 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 980 watts
• Class D 2 ohms Stable 5-Channel Amplifier

Get a FREE Amp Kit at Checkout!Shop the deal
shipping truck icon
FREE shipping to VA. Delivers Mar. 30 - Apr. 6

empty

Was $699.99 Details
$549.99

Available

Ships in 10-14 days

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohms
• 120 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 980 watts
• Class D 2 ohms Stable 5-Channel Amplifier

SRPM1100.5D small

Item added to your cart.

Price: $549.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
NVX XKIT86

Full Spec 8 Gauge 100% (OFC) Oxygen Free Copper Complete 6-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 800 Watts

$108.98

$82.98

Add to cart
NVX XAPK8

Full Spec 8 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$99.99

$54.99

Add to cart
JL Audio XD-PCS8-1B

8 Gauge Premium Amplifier Power Connection Kit

$129.99

$129.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Pair of 8 Gauge Spade Terminals, #8 Opening

Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated

$9.99

$2.49

Add to cart
8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$7.99

$2.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart

JL Audio VX700/5i

700W RMS VXi Series Class-D 5-Channel Amplifier with Digital Signal Processing (DSP)

VX700/5i big
Go to item page Right Arrow Icon of Right Arrow

700W RMS VXi Series Class-D 5-Channel Amplifier with Digital Signal Processing (DSP)

• 75 watts x 4 channel + 180 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 700 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE 2-day shipping to VA. Delivers Apr. 1 - Apr. 8
VIP Star Icon

VIP Product Get $140.00 in rewards to spend later

empty

3
$1,399.99

Available

Ships in 10-14 days

VX700/5i small

Item added to your cart.

Price: $1399.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Limited time!

Hertz Venezia V5

1700W RMS Venezia Series Class-D 5-Channel Marine Amplifier

Venezia V5 big
Go to item page Right Arrow Icon of Right Arrow

1700W RMS Venezia Series Class-D 5-Channel Marine Amplifier

• 130 watts x 4 channel + 490 watts x 1 channel @ 4 ohms
• 220 watts x 4 channel + 820 watts x 1 channel @ 2 ohms
• Bridged: @ 4 ohms + 820 watts x 1 channel @ 2 ohms
• Total RMS Power: 1700 watts
• Class D 2 ohms Stable 5-Channel Amplifier

shipping truck icon
FREE shipping to VA. Delivers Mar. 27 - Mar. 29

empty

Was $1430.00 Details
Save $330.01
$1,099.99

In stock.

• 130 watts x 4 channel + 490 watts x 1 channel @ 4 ohms
• 220 watts x 4 channel + 820 watts x 1 channel @ 2 ohms
• Bridged: @ 4 ohms + 820 watts x 1 channel @ 2 ohms
• Total RMS Power: 1700 watts
• Class D 2 ohms Stable 5-Channel Amplifier

Venezia V5 small

Item added to your cart.

Price: $1099.99

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Limited time!

AudioControl D-6.1200

200W RMS 4 ohm 6-Channel Class-D Amplifier w/ Digital Signal Processing

Go to item page Right Arrow Icon of Right Arrow

200W RMS 4 ohm 6-Channel Class-D Amplifier w/ Digital Signal Processing

• 125 Watts RMS x 6 @ 4 ohms
• 200 Watts RMS x 6 @ 2 ohms
• 400 Watts RMS x 3 @ Bridged
• Total Peak Power: 1200 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• AccuBASS circruity for improved bass response
• GTO Signal Sensing Turn On

empty

1
Was $1299.00 Details
Save $400.00
$899.00

• 125 Watts RMS x 6 @ 4 ohms
• 200 Watts RMS x 6 @ 2 ohms
• 400 Watts RMS x 3 @ Bridged
• Total Peak Power: 1200 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• AccuBASS circruity for improved bass response
• GTO Signal Sensing Turn On

D-6.1200 small

Item added to your cart.

Price: $899.00

Allstate logo

Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. 

  • Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
  • Easy online management! Zero hassle claim service, available 24/7
Essential add-ons
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

$349.99

$329.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva BB2D

2.0 Farad Capacitor with Digital Red Display

$89.99

$39.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
    clear all

    FAQ Frequently asked questions in 5-Channel, 6-Channel & 8-Channel Amplifiers 1 pair


    5-Channel, 6-Channel & 8-Channel Amplifiers Frequently Asked Questions (FAQ)
    5-channel, 6-channel, and 8-channel amplifiers are multi-channel car audio amplifiers that provide various configuration options for powering speakers and subwoofers in a vehicle's audio system. The primary advantage of these amplifiers is their versatility and space-saving design, as they consolidate the amplification of multiple speakers and subwoofers into a single unit. A 5-channel amplifier typically powers four speakers and a subwoofer, while a 6-channel amplifier can accommodate six speakers or four speakers and a pair of subwoofers. An 8-channel amplifier is even more flexible, allowing for various configurations to suit complex audio setups. These amplifiers simplify installation and reduce the need for multiple separate amplifiers, making them an ideal choice for those seeking efficient use of space and improved audio performance.
    Yes, many 5-channel, 6-channel, and 8-channel amplifiers are bridgeable, allowing you to combine channels to increase the power output for your subwoofer. Bridging channels allows you to deliver more power to a single speaker or subwoofer, enhancing its performance and bass output. However, it's essential to check the amplifier's specifications and instructions to ensure it supports bridging and to determine the recommended bridging configurations. Not all multi-channel amplifiers have bridgeable capabilities, and improper bridging can lead to damage to the amplifier or connected speakers. If you're considering bridging your amplifier, consult the user manual or seek advice from Sonic Electronix's customer support for assistance.
    Yes, that's one of the significant advantages of these multi-channel amplifiers. A 5-channel amplifier, for example, typically provides enough channels to power four speakers (front and rear) and a subwoofer. Similarly, a 6-channel amplifier can accommodate six speakers or a combination of speakers and subwoofers. The 8-channel amplifier offers even more flexibility, allowing various configurations to power a comprehensive audio system. Using a multi-channel amplifier simplifies the wiring and installation process, as it consolidates the amplification of multiple components into one unit. However, ensure that the amplifier's power ratings and impedance compatibility match your speakers and subwoofers to avoid any issues related to underpowering or overpowering the connected components.
    The ideal location to mount a multi-channel amplifier is in a well-ventilated and secure area within the vehicle's interior. It's essential to consider the amplifier's dimensions and select a suitable location that allows for proper air circulation to prevent overheating. Common mounting locations include the trunk, under a seat, or in the cargo area, as long as these locations meet the amplifier's space requirements and ensure adequate ventilation. Avoid placing the amplifier near heat sources, such as the vehicle's exhaust system or engine bay, as excessive heat can negatively impact the amplifier's performance and reliability. Additionally, secure the amplifier properly to prevent vibrations and ensure it stays in place during vehicle movement. Proper installation and placement contribute to the amplifier's longevity and optimize its audio performance.
    To determine the power requirements and compatibility, consider the RMS power rating and impedance (measured in ohms) of your speakers and subwoofers. The RMS power rating of your speakers should match or slightly exceed the RMS power output per channel of the amplifier to ensure clear and distortion-free audio reproduction. Additionally, check the impedance specifications of your speakers and subwoofers, as well as the amplifier's minimum and maximum impedance ratings. Match the impedance of your speakers and subwoofers with the appropriate amplifier channels to avoid any compatibility issues. For example, if your speakers have an impedance of 4 ohms, ensure the amplifier channels for those speakers can handle a 4-ohm load. Proper matching of power and impedance ensures an efficient and safe operation of the multi-channel amplifier and provides an enhanced listening experience. If you need assistance in selecting the right amplifier for your speakers and subwoofers, Sonic Electronix's knowledgeable staff is available to help guide you through the process.

    All About 5-Channel, 6-Channel & 8-Channel Amplifiers 1 pair


    Multi-Channel Amplifier Information

    From deep bass, excellent mids, and soaring treble tones, experience a full 360 listening experience with the most impressive audio quality that you’ve ever heard wherever the road takes you by adding a multi-channel amplifier at the heart of your car audio system.system.   

    An amplifier perfect for those who don’t want to miss a beat in their music: 5-Channel, 6-Channel, to 8-Channel amplifiers (collectively known as multi-channel amplifiers), are responsible for distributing power to different component speakers and possibly multiple subwoofers. Although not as efficient as lower-channel amplifiers, a single or double multi-channel amp configuration lets you hear the full extent of all your sound components from front to rear speakers and subwoofers without the need to sacrifice precious trunk or cabin space for your car, or even your boat!

    Invest in the wide range of sound that your car audio system is capable of with a 5, 6, and 8-Channel amplifier. We’ve got an extensive online shelf of all the best and most reliable multi-channel amplifiers available, including Class D amplifiers that are popular in modern setups for their upgraded circuitry with Pulse Width Modulation and a lowpass filter that corrects most distortion before it hits the speakers. Check out our multi-channel amplifier section and take a look at all the world-class brands such as Pioneer, JVC, NVX, Belva, Kicker, Rockford Fosgate, Cerwin-Vega, and more.

    Sonic Electronix Learning Center: What is a 5-Channel Car Audio Amplifier

    If you're in search of the best quality 5 channel, 6 channel, and 8 channel amplifiers, look no further. Our extensive collection guarantees that you'll find only the finest products to revolutionize your car audio experience. Whether you're seeking versatility, power, or precision, our range of high-performance multi-channel amplifiers will exceed your expectations.

    5 channel, 6 channel, and 8 channel amplifiers are a dream come true for car audio enthusiasts seeking an all-in-one solution to power their entire car audio system. The advantage of having a multi-channel amplifier lies in its ability to deliver dedicated power to various components of your car audio setup. For example, a 5 channel amplifier can power your front and rear speakers while also providing the necessary power for a subwoofer. This configuration ensures that each speaker receives optimal power, resulting in balanced sound distribution and a heightened listening experience.

    In the case of 6 channel and 8 channel amplifiers, the possibilities expand further. These amplifiers offer even more channels for additional components, such as rear-fill speakers, center speakers, or additional subwoofers. With a 6 channel or 8 channel amplifier, you have the flexibility to create a truly customized and immersive car audio system that caters to your preferences.

    One of the key advantages of multi-channel amplifiers is their space-saving design. By combining multiple amplifiers into one unit, you free up valuable space in your vehicle, making it an ideal choice for those looking to optimize their car's audio setup without sacrificing valuable trunk or cabin space.

    At Sonic Electronix, we are committed to helping you find the best 5 channel, 6 channel, and 8 channel amplifiers that perfectly match your requirements. Our team of car audio experts is ready to provide exceptional service and assistance throughout your shopping journey. If you have any questions or need personalized guidance in selecting the ideal amplifier for your car audio system, don't hesitate to reach out to us at 1-502-200-8010. Our friendly staff will be delighted to address your inquiries and ensure you find the perfect multi-channel amplifier to elevate your car audio experience.

    ADVERTISEMENT
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    ADVERTISEMENT
    Save up to 10 different vehicles in your garage

    Loading...
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon