Expert Service 1-877-289-7664 [Hours]

Monoblock Amplifiers Bass/Gain Remote: No, with Speaker Level Inputs

1000W RMS Class D Monoblock Performance Series Car Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Total Peak Power: 2000W
• CEA-2006 Compliant
• Dimensions: 13-13/16"W x 7-9/16" D x 2-3/16"

25% off a 4 Gauge Amp Kit with Purchase

$179.95

IN STOCK

1100W Max ZR Series Class D Monoblock Amplifier

• 330W RMS x 1 Chan. @ 4 Ohms
• 600W RMS x 1 Chan. @ 2 Ohms
• 1100W Max
• High-Level Sensing Power On Feature
• Gold Plated Speaker Terminals
• Active Thermal Control

25% off a 4 Gauge Amp Kit with Purchase

$104.95

IN STOCK

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)

• Incredibly Tiny! The size of a postcard!
• RMS: 200 x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total RMS Power: 300W
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

Save 25% on a Complete 8 Gauge Amp Kit!

$179.99

IN STOCK

500W V-Power Series Class D Monoblock Digital Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

$169.99

IN STOCK

450W Monoblock Picasso Nano Series Class D Amplifier

• RMS Power: 260W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 450W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 4.75"W x 8"L x 2"H

$99.95

IN STOCK

Only 3 Left!

650W Monoblock Picasso Nano Class-D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 650W x 1 @ 2 ohms
• Total Peak Power: 650W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 4.75"W x 9"L x 2"H

$114.95

IN STOCK

Only 3 Left!

1200W Monoblock Tarantula NANO Series Class-D Amplifier

• RMS Power: 660W x 1 @ 4 ohms, 1050W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Three-Way Protection Circuitry
• Low Pass Filter
• Dimensions: 6.75" W x 12.75" L x 1.75" H

Save 50% on the NVX Bass Expanding Processor w/ Purchase!

$183.00

IN STOCK

400W RMS XR Series Monoblock Class AB Power Amplifier

• 400W x 1-Chan. @ 2 Ohms • 280W x 1-Chan. @ 4 Ohms • Built-In Ground Loop Isolation For RCA Inputs • Remote Turn-On With Soft Start Prevents "Thump" • Speaker-Level Inputs

$119.99

IN STOCK

Only 3 Left!

1000W Monoblock Tarantula Series Class-D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 700W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm

• Audiophile Grade IRTM Transistors
• Low Pass Filter
• Dimensions: 8" W x 13" L x 2" H

$179.95

IN STOCK

Only 3 Left!

5000W Max Monoblock Class D Power House Series Digital Car Amplifier

• RMS: 1500W x 1 @ 4 ohms, 3000W x 1 @ 2 ohms
• Total Peak Power: 5000W
• Preamp RCA Outputs
• Bass Boost: 0-10 dB
• Class D Circuitry
• Dimensions: 16-1/2"L x 10-1/8"W x 2-3/8"H

FREE Bass Reconstruction Sound Processor w/ Amp!

$549.99

IN STOCK

Only 2 Left!

1000W Monoblock Picasso Series Class D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 8.25"W x 11.75"L x 2"H

$146.95

IN STOCK

Only 2 Left!

350W Monoblock Digital Low Profile Series Class D Car Amplifier

• RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Total Peak Power: 400W
• Pulse Width Modulated MOSFET Power Supply
• 4-Way Protection Circuitry
• Dimensions: 3"W x 5.9"L x 1.5"H

$129.95

IN STOCK

400W Excelon Series Monoblock Class D Car Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Variable Low-Pass Filter (50-200 Hz, 24 dB/octave)
• CEA-2006 Compliant
• Dimensions: 8-11/16"W x 1-7/16"L x 8"H

$209.99

IN STOCK

5000W Max Monoblock Class D Power House Series Digital Car Amplifier

• RMS: 1500W x 1 @ 4 ohms, 3000W x 1 @ 2 ohms
• Total Peak Power: 5000W
• Preamp RCA Outputs
• Bass Boost: 0-10 dB
• Class D Circuitry
• Dimensions: 15"L x 10-1/8"W x 2-3/8"H

$499.95

IN STOCK

Only 3 Left!

Class-D Monoblock 400W DRVN Series Single Channel Car Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• 1 Pair of Preamp Outputs
• Dimensions: 8-15/16" W x 7-5/16" L x 2-1/8" H

25% off a 4 Gauge Amp Kit with Purchase

$119.95

OUT OF STOCK

Class-D Monoblock 1000W DRVN Series Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 10-1/4" W x 11-13/16" D x 2-3/8" H

$119.99

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.