Expert Service 1-877-289-7664 [Hours]

Shipping Promo

Monoblock Amplifiers Total Peak Power Output: 501 - 1000 watts, with Speaker Level Inputs

300W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Free Gift: 1.0 Farad Capacitor with Amp Purchase!

$127.99

IN STOCK

924W Max 1-Channel Monoblock Class BR Punch Boosted Rail Amplifier

• RMS 75 x 1 @ 4 ohms, 150W x 1 @ 2 ohms, 300W x 1 @ 1 ohm
• Total Peak Power: 924W
• CEA-2006 Compliant
• Ultra Compact Chassis
• Boosted Rail Design
• Dimensions: 6-3/4"L x 4-1/4"W x 1-1/2"H

25% off a 8 Gauge Amp Kit with Purchase

$159.99

IN STOCK

Only 1 Left!

600W Monoblock Picasso Series Class D Amplifier

• RMS Power: 240W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total Peak Power: 600W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 8.25"W x 10"L x 2"H

25% off a Soundstream 1.5 Farad Capacitor with LED Display

$99.99

IN STOCK

1000W Mono Block Onyx Series Class D Amplifier

• RMS: 475W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fluid-Fets MOSFET Power Supply
• Q-Stasis Pre-Amplifier Stage
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 9.5"W x 11.26"L x 2.34"H

Save 25% on a 20 sq ft. Sound Damping Kit!

$129.99

IN STOCK

650W Monoblock Picasso Nano Class-D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 650W x 1 @ 2 ohms
• Total Peak Power: 650W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 4.75"W x 9"L x 2"H

25% off a Soundstream 1.5 Farad Capacitor with LED Display

$104.99

IN STOCK

Only 3 Left!

1000W Salt Water Series Monoblock Class D Marine Amplifier

• RMS Power: 300W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fully Painted Non-Corrosive Heatsink
• Coated Circuit Boards For Marine Use

$129.99

IN STOCK

D-Series 500W Monoblock Class D Car Amplifier

• RMS Power: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Save 50% on a Matching Kicker Amp Kit

$195.99

IN STOCK

Only 2 Left!

Class-D Monoblock 1000W DRVN Series Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 10-1/4" W x 11-13/16" D x 2-3/8" H

$119.99

IN STOCK

Only 1 Left!

1000W Monoblock Picasso Series Class D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 8.25"W x 11.75"L x 2"H

25% off a Soundstream 1.5 Farad Capacitor with LED Display

$134.99

IN STOCK

900W Atom Series Monoblock Class D Car Amplifier

• RMS Power: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 900W
• Variable Low-Pass Filter (35-250 Hz, 24 dB/octave)
• Dimensions: 5"W x 7.2"L x 1.5"H

$139.99

IN STOCK

Only 1 Left!

350W Monoblock Digital Low Profile Series Class D Car Amplifier

• RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Total Peak Power: 400W
• Pulse Width Modulated MOSFET Power Supply
• 4-Way Protection Circuitry
• Dimensions: 3"W x 5.9"L x 1.5"H

$119.95

IN STOCK

1000W Max 1 Channel Monoblock Volt Series Class A/B Car Amplifier

• 250W RMS @ 4 ohms
• 355W RMS @ 2 ohms
• MOSFET Power Supply
• Variable Low-Pass Filter
• Built-In Subsonic Filter
• Variable Bass Boost
• 4-Way Protection Circuitry
• CEA-2006 Compliant

25% off a 8 Gauge Amp Kit with Purchase

$119.00

OUT OF STOCK

Class-D Monoblock 400W DRVN Series Single Channel Car Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• 1 Pair of Preamp Outputs
• Dimensions: 8-15/16" W x 7-5/16" L x 2-1/8" H

25% off a 4 Gauge Amp Kit with Purchase

$119.95

OUT OF STOCK

400W Excelon Series Monoblock Class D Car Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Variable Low-Pass Filter (50-200 Hz, 24 dB/octave)
• CEA-2006 Compliant
• Dimensions: 8-11/16"W x 1-7/16"L x 8"H

$189.99

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.