Expert Service 1-877-289-7664 [Hours]

Narrow Your Results

Your Filters

Clear All
Availability
Total Peak Power Output
Speaker Level Inputs
No
Price range:
$79.95 $699.95
$
to
$

Amplifier Class:

Number of Channels:

Minimum Impedance Unbridged:

Minimum Impedance Bridged:

Preamp Outputs:

CEA-2006 Compliant:

Maximum Input Gauge Size:

Monoblock Amplifiers Total Peak Power Output: 501 - 1000 watts, without Speaker Level Inputs

500W RMS Class D 1-Channel Monoblock Performance Series Car Power Amplifier

• RMS: 300 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 9-7/16"W x 7-9/16"L x 2-3/16"H

25% off a 4 Gauge Amp Kit with Purchase

$129.99

IN STOCK

1000W Max, Monoblock Gothic Series Class AB Car Amplifier

• RMS: 375W x 1 @ 4 ohms, 470W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 1 Pair of Preamp Outputs
• Bass Boost: 0-18 dB
• Low Pass Filter: 40-150 Hz
• Dimensions: 9"L x 9-3/4"W x 2-3/10"H

50% off NVX 2-Channel RCA Cables w/ purchase!

$79.95

IN STOCK

500W RMS Class D 1-Channel Monoblock Power Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 3-Way Protection Circuitry
• Selectable Bass Boost (0-6-12 dB)
• Class D Circuitry
• Dimensions: 6-5/16"W x 8-15/16"L x 2-1/4"H

Integrate an Amplifier in to your Factory System and Save!

$179.95

IN STOCK

Only 2 Left!

1000W Max, PowerZone Series Monoblock Amplifier

PowerZone Series Monoblock Car Amplifier • 250W x 1 chan. @ 4 ohms • 500W x 1 chan. @ 2 ohms • 1000W x 1 chan. @ 1 ohm • MOSFET output power circuit configuration • Tuned Bass EQ (0-12 dB bass boost at 45 Hz)

$109.99

IN STOCK

Only 1 Left!

1000W Max Monoblock MINI D Mono Compact Car Amplifier

• RMS: 180W x 1 @ 4 ohms, 360W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Mini Class D Design
• Bass Boost: 0-12 dB at 50 Hz
• Wired Bass Remote Control Included
• Dimensions: 6-5/16"W x 8-1/16"L x 1-7/8"H

Integrate an Amplifier in to your Factory System and Save!

$149.95

IN STOCK

Only 2 Left!

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

Maximize the Bass with a Digital Bass Restoration Processor!

$299.95

IN STOCK

Only 2 Left!

Monoblock Class D, HD Series Small Profile Car Amplifier with R.I.P.S. Technology

• RMS: 750W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 750W x 1 @ 1 ohm
• Total RMS Power: 750W
• R.I.P.S. - Regulated, Intelligent Power Supply
• Single Cycle control - High Fidelity Class D
• 1 Pair of Buffered Preamps RCA Outputs
• Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H

FREE Bass Reconstruction Sound Processor w/ Amp!

$699.95

IN STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.