Expert Service 1-877-289-7664 [Hours]

End of Year Clearance Dot Sale

Monoblock Amplifiers Total Peak Power Output: 501 - 1000 watts, with 1 pair of Preamp Outputs

1000W Brutus Series Monoblock Class D Car Amplifier

• RMS: 400W x 1 @ 4 ohms, 700W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Ultra-Fi™ Pulse Width Modulated MOSFET Power Supply
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 10.31"W x 14.35"L x 2.52"H

$154.99

IN STOCK

300W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Free Gift: 1.0 Farad Capacitor with Amp Purchase!

$127.99

IN STOCK

900W Max Power Series Class AB Monoblock Amplifier with Black Gloss Finish

• RMS: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 3600W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• High Current Bi-Polar Transistors
• Dimensions: 9"D x 15-3/4"W x 2-1/2"H

25% off a 4 Gauge Amp Kit with Purchase

$84.99

IN STOCK

1000W Max, Monoblock Gothic Series Class AB Car Amplifier

• RMS: 375W x 1 @ 4 ohms, 470W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 1 Pair of Preamp Outputs
• Bass Boost: 0-18 dB
• Low Pass Filter: 40-150 Hz
• Dimensions: 9"L x 9-3/4"W x 2-3/10"H

50% off NVX 2-Channel RCA Cables w/ purchase!

$79.95

IN STOCK

1000W Mono Block Onyx Series Class D Amplifier

• RMS: 475W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fluid-Fets MOSFET Power Supply
• Q-Stasis Pre-Amplifier Stage
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 9.5"W x 11.26"L x 2.34"H

Save 25% on a 20 sq ft. Sound Damping Kit!

$129.99

IN STOCK

1000W Monoblock APSM Series Class D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Variable Low Pass Filter
• Dimensions: 10.5" W x 6.1" D x 1.9" H

$114.95

IN STOCK

Only 2 Left!

1000W Consumer Line Series Class D Monoblock Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 6.93" W x 11.34" L x 2.16" H

$155.99

IN STOCK

1000W Monoblock Ground Pounder Class A/B Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Variable Bass Boost
• Total Peak Power: 1000W
• 9.05"W x 13.93"L x 2.29"H

25% off 0/1 Gauge Amp Kit with Select Amplifiers!

$89.99

IN STOCK

D-Series 500W Monoblock Class D Car Amplifier

• RMS Power: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Save 50% on a Matching Kicker Amp Kit

$195.99

IN STOCK

Only 2 Left!

Class-D Monoblock 1000W DRVN Series Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 10-1/4" W x 11-13/16" D x 2-3/8" H

$119.99

IN STOCK

Only 1 Left!

894W Max, Reference Series Class D Monoblock Amplifier

• RMS: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Total RMS Power: 600W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/16"L x 9"W x 2-11/16H

25% off a 4 Gauge Amp Kit with Purchase

$179.95

IN STOCK

Only 2 Left!

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

50% Off an NVX Subwoofer with Purchase of Kicker Amplifier!

$279.95

IN STOCK

Only 1 Left!

350W Monoblock Digital Low Profile Series Class D Car Amplifier

• RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Total Peak Power: 400W
• Pulse Width Modulated MOSFET Power Supply
• 4-Way Protection Circuitry
• Dimensions: 3"W x 5.9"L x 1.5"H

$119.95

IN STOCK

Monoblock Class D, HD Series Small Profile Car Amplifier with R.I.P.S. Technology

• RMS: 750W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 750W x 1 @ 1 ohm
• Total RMS Power: 750W
• R.I.P.S. - Regulated, Intelligent Power Supply
• Single Cycle control - High Fidelity Class D
• 1 Pair of Buffered Preamps RCA Outputs
• Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H

FREE Bass Reconstruction Sound Processor w/ Amp!

$549.95

OUT OF STOCK

500W RMS Constant Power Series Class BD Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

$349.99

OUT OF STOCK

750W Max Class Q1 1-Channel Monoblock Onyx Series Amplifier

• Peak: 350W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 750W x 1 @ 1 ohm
• Total Peak Power: 750W
• 1 Pair of Preamp RCA Outputs
• Variable Bass Boost: 0 to +12 dB
• Class Q1 Circuitry
• Dimensions: 9-7/16"W x 15-3/4"D x 2-1/4"H

50% off NVX 2-Channel RCA Cables w/ purchase!

$119.95

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.