Expert Service 1-661-257-9993 [Hours]

Amp up your factory system with quality car amplifiers. Find a large selection of monoblock amps including Class D, mini amps, micro amps and other car amps for subwoofers. Shop now!
Narrow Your Results

Your Filters

Clear All
Bass/Gain Remote
Yes
Price range:
$49.99 $3199.95
$
to
$

Number of Channels:

Minimum Impedance Unbridged:

Minimum Impedance Bridged:

Sonic Certified Amplifier:

Speaker Level Inputs:

CEA-2006 Compliant:

Amp Bluetooth Connectivity:

Monoblock Amplifiers Bass/Gain Remote: Yes

1500 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier (HFi 1500D)

• 4 ohms: 500 watts x 1 chan.
• 2 ohms: 1000 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan.
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$149.99

IN STOCK

True 1200W RMS, Class D Monoblock Amplifier with Bass Remote

• RMS: 500W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H

50% off a True 1/0 Gauge OFC Amp Kit with NVX Amp Purchase!

$229.99

IN STOCK

500W RMS Prime Series Class D Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$119.99

IN STOCK

1000 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier

• 4 ohms: 475 watts x 1 chan.
• 2 ohms: 750 watts x 1 chan.
• 1 ohms: 1000 watts x 1 chan.
• Wired HFR-3 remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• Frequency Response: 15 - 250 Hz
• Signal to Noise Ration: >95 dB
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$129.99

IN STOCK

1100W Max Class A/B Riot Series 2-Ohm Stable Monoblock Car Amplifier w/ Remote Subwoofer Level Control

• 550 Watts Peak x 1 @ 4 ohms
• 1100 Watts Peak x 1 @ 2 ohms
• 825 Watts RMS x 1 @ 2 ohms
• Remote Subwoofer Level Control Included
• Pulse Width Modulated MOSFET power supply
• Speaker-level (high-level) inputs
• Signal to Noise Ration: 102 dB
• Frequency Response: 9 - 50,000 Hz

50% off an 8 Gauge Amp Kit with Select Amplifiers Purchase!

$49.99

IN STOCK

1500W Max Armor Series Class A/B Monoblock Amplifier with Remote Subwoofer Level Control Included

• RMS: 700W x 1 @ 4 ohms
• Peak: 1500W x 1 @ 2 ohms
• Wired Bass Remote Included
• Bass Boost 0-18 dB
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 10-1/3"L x 5"W x 2-3/16"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$52.99

IN STOCK

1200W Max Zeus Series 1-Ohm Stable Class D Monoblock Amplifier

• Peak: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total Peak Power: 1200W
• Class D Circuitry
• Variable Bass Boost: 0 to +10 dB at 45 Hz
• Wired Bass Remote Included
• Dimensions: 12"L x 10"W x 2-7/16"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$109.99

IN STOCK

2000 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 2000 Watt)

• RMS: 700W x 1 @ 4 ohms, 1400W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H

10% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$199.99

IN STOCK

1100 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 1100 Watt)

• RMS: 450W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1100W x 1 @ 1 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 14-3/8"L x 10-5/16"W x 2-1/2"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$149.95

IN STOCK

1500W Max Anarchy Series Monoblock Power Amplifier

• 4 ohms: 700 watts x 1 chan.
• 2 ohms: 1100 watts x 1 chan.
• Peak: 1500W x 1 @ 2 ohms
• Illuminated Logo
• Bass Boost 0-18 dB
• Chrome-Plated Connections
• Dimensions: 10"L x 10"W x 2-3/16"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$59.99

IN STOCK

2400 Watt RMS Brutus Series NextGen Class D Monoblock 1-Ohm Stable Subwoofer Amplifier - (Brutus 2400 Watt)

• RMS: 850W x 1 @ 4 ohms, 1600W x 1 @ 2 ohms, 2400W x 1 @ 1 ohm
• Total RMS Power: 2400W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 45 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H

Get 15% off a 5 Farad Digital Hybrid Capacitor w/ Purchase!

$249.99

IN STOCK

1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier

• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Class D Circuitry
• Dimensions: 6-3/4"L x 11-1/16"W x 2"H

10% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$239.99

IN STOCK

5000W Max Anarchy Series Class D Monoblock Power Amplifier

• RMS: 1800W x 1 @ 4 ohms, 2500W x 1 @ 2 ohms, 3500W x 1 @ 1 ohm
• Total Peak Power: 5000W
• Illuminated Logo
• Bass Boost 0-18 dB
• Chrome-Plated Connections
• Dimensions: 18"L x 10"W x 2-3/16"H

Limited Offer: 15% off a Belva Wiring + Capacitor Kit!

$142.95

IN STOCK

4000W Max Monoblock ARMOR Series Class D Car Amplifier

• RMS: 1600W x 1 @ 4 ohms
• Peak: 3000W x 1 @ 2 ohms, 4000W x 1 @ 1 ohm
• Strappable Peak: 6000W x 1 @ 2 ohms
• Bass Boost 0-12 dB
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 14-1/3"W x 5"D x 2-8/10"H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$104.99

IN STOCK

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

• RMS: 580W x 1 @ 4 ohms, 725W x 1 @ 2 ohms 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$169.97

IN STOCK

Only 2 Left!

800W RMS Class D Monoblock GM Digital Series Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 800W x 1 @ 1 ohm
• Total Peak Power: 1500W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB
• Class D Circuitry
• Dimensions: 10-7/16"W x 2-3/8"D x 7-7/8"H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$119.99

IN STOCK

3000 Watt Monoblock Brutus Series Super Class D 1-Ohm Stable Subwoofer Amplifier - (Brutus 3000 Watt)

• 1000 Watts RMS x 1 @ 4 ohms
• 2000 Watts RMS x 1 @ 2 ohms
• 3000 Watts RMS x 1 @ 1 ohm
• Wired remote bass level control included
• Mono channel operation, 1-Ohm Stable
• 3-way system protection circuitry (thermal, overload and speaker short protection)
• Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)

15% off an NVX True 1/0 Gauge Amp Kit with Select Amplifier!

$274.99

IN STOCK

250W RMS Monoblock Class D Road Thunder Amplifier

• RMS: 125W x 1 @ 4 ohms, 250W x 1 @ 2 ohms
• Total RMS Power: 250W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Class D Circuitry
• Dimensions: 10"L x 7-1/16"W x 2-1/8"H

Save 50% on an 8 Gauge Amp Kit with Purchase!

$79.95

IN STOCK

1500W RMS APCL Series 1-Ohm Stable Monoblock Class D Subwoofer Amplifier

• RMS Power: 600W x 1 @ 4 ohms, 950W x 1 @ 2 ohms
• Total Peak Power: 1500W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 6.9" W x 14" L x 2.16" H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$159.95

IN STOCK

2000W Peak (1944W RMS) APMI Series Class-D Monoblock 1-Ohm Stable Mosfet Car Amplifier

• RMS Power: 770W x 1 @ 4 ohms, 1300W x 1 @ 2 ohms, 1944W x 1 @ 1 ohm
• Total Peak Power: 2000W
• Variable Low Pass Filter
• Dimensions: 6.49" W x 16.39" L x 2.20" H

Limited Offer: 15% off a Belva Wiring + Capacitor Kit!

$189.95

IN STOCK

Only 3 Left!

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.