Expert Service 1-877-289-7664 [Hours]

Narrow Your Results

Your Filters

Clear All
Availability
Bass/Gain Remote
No
Price range:
$32.95 $259.99
$
to
$

Amplifier Class:

Number of Channels:

Minimum Impedance Unbridged:

Preamp Outputs:

Speaker Level Inputs:

CEA-2006 Compliant:

Maximum Input Gauge Size:

2-Channel Amplifiers Bass/Gain Remote: No

300W RMS 2-Channel Class FD Car Amplifier

• 4 ohms: 125 watts x 2 chan.
• 2 ohms: 150 watts x 2 chan.
• Bridged, 4 ohms: 300 watts x 1 chan.
• Oxygen-Free Copper Wire Coil for Output
• TVC(Total Volume Control) Increases Signal-to-Noise Ratio

$169.99

OUT OF STOCK

1400W Max, Class A/B 2-Channel Chopper Series Car Amplifier

Chopper Series 2-Channel Class A/B Car Amplifier • 80W RMS x 2 Chan. @ 4 ohms • 140W RMS x 2 Chan. @ 2 ohms • 160W RMS x 1 Chan. @ 4 ohms Bridged • Low/High Level Inputs • Variable Crossover Network • Switchable Bass Boost • Anti-Thump Turn On

$64.99

OUT OF STOCK

200W 2 Channel SSL Series Class AB Car Amplifier

• RMS Power: 50W x 2 @ 4 ohms, 100W x 2 @ 2 ohms
• Total Peak Power: 200W
• Fixed Low-Pass Filter (120 Hz, 24 dB/octave)
• Dimensions: 4.5"W x 9"L x 2"H

$32.95

OUT OF STOCK

2-Channel 600W DRVN Series Class A/B Car Amplifier

• 4 ohms: 100 watts x 2 chan.
• 2 ohms: 150 watts x 2 chan.
• Bridged, 4 ohms: 300 watts x 1 chan.
• Pulse Width Modulated MOSFET Power Supply

$89.95

OUT OF STOCK

1000W Max, Class A/B 2-Channel BMW Series Car Amplifier

BMW Seires 2-Channel Class A/B Car Amplifier • 1000W Max • 4 Ohm Stable • Variable Bass Boost • Variable Crossovers • Low and High Level Inputs • 3-Way Protection Circuitry

$89.99

OUT OF STOCK

160W RMS DTX Series Class AB 2-Channel/Stereo Amplifier

DTX Series 2-Channel Class AB Amplifier • 60W x 2 Chan. @ 4 ohms • 80W x 2 Chan. @ 2 ohms • 4-Way System Protection • 2/1 Channel Operation • 8 Gauge Power and Ground Inputs • Variable Bass Boost (0-12 dB)

$76.99

OUT OF STOCK

400W RMS 2-Channel Picasso Series Class AB Bridgeable Car Amplifier

• RMS: 70W x 2 @ 4 ohms, 100W x 2 @ 2 ohms
• Total Peak Power: 400W
• 2 or Mono channel operation
• Variable LPF, HPF
• HEATSINK
• High-Level inputs

$54.99

OUT OF STOCK

960W Max Nano Block Series 2-Channel Amplifier

• 480W Max
• MOSFET Power Supply
• LED Power/Protect Indicators
• Ultimate Mounting Flexibility
• Mill Spec Double Sided PCB with SMD Parts

$119.00

OUT OF STOCK

3000W Max, 2-Channel Max Series Amplifier (MXA-244)

Max Series 2-Channel Car Amplifier • 3000W Max • 300W x 2-Chan. @ 2 Ohms • 250W x 2-Chan. @ 4 Ohms • Phase Shift 0-180 • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

$104.95

OUT OF STOCK

2400W Max, 2-Channel Class A/B Stereo Amplifier

• 400W x 2 Chan. @ 4 ohms
• 600W x 2 Chan. @ 2 ohms
• 2 Channel Operation
• Soft Turn-On/Turn-Off
• Electronic Crossover Network

$259.99

OUT OF STOCK

2000W Max, 2-Channel, District Series Car Amplifier

• 2 ohms: 950 watts x 2 chan.
• Bridged, 4 ohms: 2000 watts x 1 chan.
• Peak power rating: 2000 watts x 1 chan.

$99.99

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

2-Channel Amplifiers Information

2-Channel Amplifiers

A 2 channel amplifier is an amp that can operate two channels. It is basically two 1-channel amplifiers in a single box. This unit is usually intended for operating a left speaker and a right speaker.

A channel is the signal and power combination intended for one specific speaker. A car stereo audio system usually has a left channel and a right channel. More advanced audio systems may have separate channels for different types of speakers (midrange, subwoofer, and tweeter) or for rear channels (surround).

A bridged 2 channel amplifier is constructed in such a way that the amplifiers can be set up to operate inline providing the effect of a more powerful one channel amplifier. If durability is a concern, a bridgeable two channel amplifier used for two channels tends to work well because it's likely to have higher quality or just more diodes during bridged operation. Using a more powerful amplifier with the gain turned down is also a good idea if longevity is a concern.