Expert Service 1-877-289-7664 [Hours]

Amp up your factory system with quality car amplifiers. Find a large selection of monoblock amps including Class D, mini amps, micro amps and other car amps for subwoofers. Shop now!
Narrow Your Results
Price range:
$31.99 $3199.95
$
to
$

Amplifier Series:

Minimum Impedance Unbridged:

Sonic Certified Amplifier:

CEA-2006 Compliant:

Amp Bluetooth Connectivity:

Monoblock Amplifiers

1200W Monoblock Brutus Elite Series Super Class D Amplifier

• RMS Power: 450W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total Peak Power: 2400W
• Variable Low Pass Filter
• Dimensions: 9.65" W x 13.78" L x 2.48" H

$159.99

IN STOCK

770W Max (500W RMS) GTX Series Class-D Monoblock 2-Ohm Stable Amplifier

• RMS: 350W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 770W
Bare wire-to-RCA adapters included
• Signal sensing turn-on
• Signal to Noise Ratio: > 80 dB
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$119.95

IN STOCK

1000 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier

• 4 ohms: 475 watts x 1 chan.
• 2 ohms: 750 watts x 1 chan.
• 1 ohms: 1000 watts x 1 chan.
• Wired HFR-3 remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• Frequency Response: 15 - 250 Hz
• Signal to Noise Ration: >95 dB
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$129.99

IN STOCK

1500 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier (HFi 1500D)

• 4 ohms: 500 watts x 1 chan.
• 2 ohms: 1000 watts x 1 chan.
• 1 ohms: 1500 watts x 1 chan.
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$149.99

IN STOCK

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)

• Incredibly Tiny! The size of a postcard!
• RMS: 200 x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total RMS Power: 300W
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

50% off Bluetooth Receiver with Your NVX Amplifier Purchase!

$119.99

IN STOCK

Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display

• RMS: 500 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H

Get 20% off an NVX Universal Remote Level Control!

$169.99

IN STOCK

True 1200W RMS, Class D Monoblock Amplifier with Bass Remote

• RMS: 500W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H

40% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$229.99

IN STOCK

300W Class D Full-Range Ultra-Compact Monoblock Amplifier for Powersport Vehicles / SSVs / UTVs / Motorcycles / Muscle Cars / HotRods / Cars

• 160w x 1 @ 4ohms , 220w x 1 @ 3ohms , 300w x 1 @ 2ohms
• NexD™ ultra-high-speed switching design
• Black powder-coated finish
• Gasketed cover for the controls
• Stainless steel hardware for durability
• Accepts RCA (low-level) & Speaker-level (high-level) signal
• Signal to Noise Ration: 85 dB

Get 5% off the JL Audio Marine Bass Knob with Purchase!

$169.99

IN STOCK

1500W Max Anarchy Series Monoblock Power Amplifier

• 4 ohms: 700 watts x 1 chan.
• 2 ohms: 1100 watts x 1 chan.
• Peak: 1500W x 1 @ 2 ohms
• Illuminated Logo
• Bass Boost 0-18 dB
• Chrome-Plated Connections
• Dimensions: 10"L x 10"W x 2-3/16"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$59.99

IN STOCK

2000 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 2000 Watt)

• RMS: 700W x 1 @ 4 ohms, 1400W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total RMS Power: 2000W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H

10% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$199.99

IN STOCK

500W Wet Series Mono Block Class D All-Weather Powersports/Marine Amplifier

• RMS Power: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• Plastic Cover Over Control-Adjustments
• Dimensions: 8.90"W x 6.40"L x 2.25"H

40% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$249.95

IN STOCK

Only 2 Left!

1100W Max Class A/B Riot Series Monoblock Car Amplifier

• RMS: 250W x 1 @ 4 ohms
• Total Peak Power: 1100W
• Hi-Level Inputs
• 9.13" W x 10.44" L x 2.25" H

50% off an 8 Gauge Amp Kit with Select Amplifiers Purchase!

$49.99

IN STOCK

2400 Watt RMS Brutus Series NextGen Class D Monoblock 1-Ohm Stable Subwoofer Amplifier - (Brutus 2400 Watt)

• RMS: 850W x 1 @ 4 ohms, 1600W x 1 @ 2 ohms, 2400W x 1 @ 1 ohm
• Total RMS Power: 2400W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 45 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H

Get 15% off a 5 Farad Digital Hybrid Capacitor w/ Purchase!

$249.99

IN STOCK

1100 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 1100 Watt)

• RMS: 450W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1100W x 1 @ 1 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 40 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 14-3/8"L x 10-5/16"W x 2-1/2"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$144.95

IN STOCK

4000W Max SE Series Class-D 1-Ohm Stable Monoblock Amplifier

• 1200 Watts RMS x 1 @ 4 ohms
• 1700 Watts RMS x 1 @ 2 ohms
• 2200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Variable low-pass filter: 40 - 150Hz, 12 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost
• Wired remote bass level control included
• Dimensions: 8.75"W x 14.7"L x 2.25"H

40% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$179.99

IN STOCK

5000W Max Anarchy Series Class D Monoblock Power Amplifier

• RMS: 1800W x 1 @ 4 ohms, 2500W x 1 @ 2 ohms, 3500W x 1 @ 1 ohm
• Total Peak Power: 5000W
• Illuminated Logo
• Bass Boost 0-18 dB
• Chrome-Plated Connections
• Dimensions: 18"L x 10"W x 2-3/16"H

Limited Offer: 15% off a Belva Wiring + Capacitor Kit!

$139.99

IN STOCK

1500W Peak (600W RMS) Monoblock GTR Series Class D Subwoofer Amplifier

• 380 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Variable Bass Boost: 0 to +9 dB bass boost
• Signal to Noise Ratio: >80dB

40% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

Go to product to see the price

IN STOCK

500W RMS Prime Series Class D Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$129.99

IN STOCK

2000W Max PDX Series 1-ohm Stable Class D Monoblock Car Amplifier with Wired Remote Bass Level Control

• Power One Series Monoblock Class A/B Car Amplifier • 2000W Max • 1000W x 1-Chan @ 1 Ohm • SEPP Analog Amplifier • Remote Bass Level Control • Preamp RCA Outputs • Dual Speaker Terminals • Soft Start Turn-On

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

$99.99

IN STOCK

3000W Max Anarchy Series Class D Monoblock Power Amplifier

• RMS: 1000W x 1 @ 4 ohms, 1500W x 1 @ 2 ohms, 2100W x 1 @ 1 ohm
• Total Peak Power: 3000W
• Illuminated Logo
• Bass Boost 0-18 dB
• Chrome-Plated Connections
• Dimensions: 13"L x 10"W x 2-3/16"H

Limited Offer: 15% off a Belva Wiring + Capacitor Kit!

$102.95

IN STOCK

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.