Expert Service 1-877-289-7664 [Hours]

Free eGift Card Promo
Narrow Your Results

Your Filters

Clear All
Availability
Total RMS Power Output
Total Peak Power Output
Price range:
$34.95 $216.99
$
to
$

Amplifier Class:

Number of Channels:

Minimum Impedance Unbridged:

Minimum Impedance Bridged:

Preamp Outputs:

Speaker Level Inputs:

CEA-2006 Compliant:

Maximum Input Gauge Size:

Monoblock Amplifiers Total RMS Power Output: Up to 250 watts, Total Peak Power Output: Up to 500 watts

200W Monoblock Chaos Epic Series Class AB Amplifier

• RMS Power: 100W x 1 @ 4 ohms, 200W x 1 @ 2 ohms
• Total Peak Power: 200W
• Variable Low Pass Filter
• Dimensions: 4" W x 3.125" L x 1.625" H

$34.95

IN STOCK

450W Monoblock Picasso Nano Series Class D Amplifier

• RMS Power: 260W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 450W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 4.75"W x 8"L x 2"H

25% off a Soundstream 1.5 Farad Capacitor with LED Display

$94.99

IN STOCK

Only 2 Left!

200W Monoblock Class A/B Car Amplifier

• Total Peak Power: 200W
• Variable Low-Pass Filter (50-250 Hz, 24 dB/octave)
• Dimensions: 1.625"W x 4"L x 3.125"H

$39.99

IN STOCK

415W Monoblock GX Series Class D Amplifier

• RMS Power: 200W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total Peak Power: 415W
• Variable Low Pass Filter
• Dimensions: 11-7/16" W x 8-1/8" L x 2-1/16" H

Save 25% on a Complete 8 Gauge Amp Kit!

$149.95

IN STOCK

Only 3 Left!

D-Series 250W Monoblock Class D Car Amplifier

• RMS Power: 125W x 1 @ 4 ohms, 250W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

$139.95

IN STOCK

250W RMS, 1-Channel Monoblock Class A/B JX Series Full-Range Car Amplifier

• Peak: 175W x 1 @ 4 ohms, 210W x 1 @ 3 ohms, 250W x 1 @ 2 ohms
• Total RMS Power: 250W
• Soft-Start Turn On
• Bass Boost: 0-12 dB
• Variable Slope Low-Pass Filter
• Dimensions: 11L x 7-3/4"W x 2-1/8"H

Save 50% on the NVX Bass Expanding Processor w/ Purchase!

$169.95

IN STOCK

Only 2 Left!

2500W Evolution Series Class A/B Monoblock Car Amplifier

• RMS Power: 1250W x 2 @ 4 ohms, 2500W x 1 @ 2 ohms
• Variable Bass Boost
• Mono Channel Operation
• 10"W x 15.5"L x 2.25"H

$99.99

IN STOCK

200W RMS MSK Series Monoblock Class D Compact Car Amplifier

• RMS: 87W x 1 @ 4 ohms, 150W x 1 @ 2 ohms, 218W x 1 @ 1 ohm
• Total RMS Power: 218W
• 1 Pair of Preamp Outputs
• Dimensions: 4-15/16" W x 6-5/16" L x 2-1/4" H

25% off a 8 Gauge Amp Kit with Purchase

$109.99

IN STOCK

2500W RMS Class D Monoblock HD Series Car Amplifier

• RMS: 1250W
• Total Peak Power: 2500W
• Low Level Input and Output
• Variable Low Pass Filter
• S/N Ratio: >85
• Remote Gain Controller

$216.99

IN STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.