Expert Service 1-877-289-7664 [Hours]

Shipping Promo
Narrow Your Results

Your Filters

Clear All
Total RMS Power Output
Price range:
$57.50 $369.99

Amplifier Class:

Number of Channels:

Minimum Impedance Unbridged:

Minimum Impedance Bridged:

Preamp Outputs:

Speaker Level Inputs:

CEA-2006 Compliant:

Maximum Input Gauge Size:

2-Channel Amplifiers Total RMS Power Output: 251 - 500 watts

360W RMS Power Class Series 2-Channel Car Amplifier (PC 3602)

• 4 ohms: 110 watts x 2 chan, 2 ohms: 180 watts x 2 chan
• 360W Max
• Large TO218 MOSFET Transistors
• Triple Darlington Audio Output Stages
• Close Tolerance Signal Path Components
• Extra Low Current Drive Stage

25% off a 8 Gauge Amp Kit with Purchase



1000W Max 2-Channel TNT Series Class AB Car Amplifier with High Level Inputs

• 200W x 2 Chan. @ 4 ohms
• 300W x 2 Chan. @ 2 ohms
• Fully Regulated MOSFET Power Supply
• LED Power & Protect Indicators
• Variable Bass Boost
• Preamp RCA Outputs
• Heavy Duty Aluminum Alloy Heatsink
• Soft Start Turn-On

50% off NVX 2-Channel RCA Cables w/ purchase!



1000W Max, Class A/B 2-Channel BMW Series Car Amplifier

BMW Seires 2-Channel Class A/B Car Amplifier • 1000W Max • 4 Ohm Stable • Variable Bass Boost • Variable Crossovers • Low and High Level Inputs • 3-Way Protection Circuitry



500W RMS Punch Series 2-Channel Stereo Class AB Car Power Amplifier (P500X.2)

• 150W x 2 Chan. @ 4 ohms
• 250W x 2 Chan. @ 2 ohms
• Built In NOMAD "Real Time" Analog Computer
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

25% off a 4 Gauge Amp Kit with Purchase



960W Max Nano Block Series 2-Channel Amplifier

• 480W Max
• MOSFET Power Supply
• LED Power/Protect Indicators
• Ultimate Mounting Flexibility
• Mill Spec Double Sided PCB with SMD Parts



900W Max, 2-Channel Gothic Series Car Amplifier

• 4 ohms: 135 watts x 2 chan.
• 2 ohms: 180 watts x 2 chan.
• Bridged, 4 ohms: 360 watts x 1 chan.
• Max power output: 900 watts

25% off a 8 Gauge Amp Kit with Purchase



EVO Series 1000 W Class A/B 2 Channel Amplifier

• RMS Power: 250W x 2 @ 4 ohms
• Total Peak Power: 1000W
• Variable Low Pass Crossover: 45 to 90 Hz
• Dimensions: 2.3"W x 9.188"L x 10"H



400W RMS Power Series Compact 2-Channel Amplifier

• 4 ohms: 120 watts x 2
• 2 ohms: 240 watts x 2
• Bridged, 4 ohms: 400 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz



1150W Class AB 2-Channel SQ Series Car Amplifier

• RMS @ 4 Ohm, Mono 500W x 1CH, RMS @ 4 Ohm, Stereo 200W x 2CH, 4RMS @ 2 Ohm, Stereo 300W x 2CH
• Total Peak Power: 2000W
• S/N Ratio >100dB • Input Sensitivity 0.15V-5V
• Heavy duty aluminum alloy heat-sink
• Dimensions: 9.6"W x 18" L x 2.2" H



Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

2-Channel Amplifiers Information

2-Channel Amplifiers

A 2 channel amplifier is an amp that can operate two channels. It is basically two 1-channel amplifiers in a single box. This unit is usually intended for operating a left speaker and a right speaker.

A channel is the signal and power combination intended for one specific speaker. A car stereo audio system usually has a left channel and a right channel. More advanced audio systems may have separate channels for different types of speakers (midrange, subwoofer, and tweeter) or for rear channels (surround).

A bridged 2 channel amplifier is constructed in such a way that the amplifiers can be set up to operate inline providing the effect of a more powerful one channel amplifier. If durability is a concern, a bridgeable two channel amplifier used for two channels tends to work well because it's likely to have higher quality or just more diodes during bridged operation. Using a more powerful amplifier with the gain turned down is also a good idea if longevity is a concern.