Expert Service 1-877-289-7664 [Hours]

Sonic Closeout Sale
Narrow Your Results

Your Filters

Clear All
Availability
Total RMS Power Output
Price range:
$69.99 $499.99
$
to
$

Amplifier Class:

Number of Channels:

Minimum Impedance Unbridged:

Minimum Impedance Bridged:

Preamp Outputs:

Speaker Level Inputs:

CEA-2006 Compliant:

Maximum Input Gauge Size:

2-Channel Amplifiers Total RMS Power Output: 501 - 1000watts

1200W Max, Auto Sound Series 2-Channel Class AB Car Amplifier

Auto Sound 2-Channel Class A/B Car Amplifier • 150 Watts x 2 Chan. @ 4 Ohms • 300 Watts x 2 Chan. @ 2 Ohms • 1200 Watts Max • 3-Way System Protection Circuitry • LED Power And Protect Indicators • MOSFET Power Supply •

Integrate an Amplifier in to your Factory System and Save!

$149.99

IN STOCK

Only 2 Left!

1600W Max, Auto Sound Series 2-Channel Class AB Car Amplifier

Auto Sound 2-Channel Class A/B Car Amplifier • 200 Watts x 2 Chan. @ 4 Ohms • 400 Watts x 2 Chan. @ 2 Ohms • 1600 Watts Max • 3-Way System Protection Circuitry • LED Power And Protect Indicators • MOSFET Power Supply •

Integrate an Amplifier in to your Factory System and Save!

$179.99

IN STOCK

2000W Max Evolution Series 2-Channel Class AB Car Amplifier with Remote Level Control

• 350W x 2 Chan. @ 4 Ohms
• 1000W x 2 Chan. @ 2 Ohms
• 2000W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

$109.99

OUT OF STOCK

1200W 2 Channel Torque Series Class A/B Car Amplifier

• RMS Power: 300W x 2 @ 4 ohms, 600W x 2 @ 2 ohms
• Total Peak Power: 1200W
• Variable Low-Pass Filter (50-250 Hz, 24 dB/octave)
• Dimensions: 9.5"W x 12.25"L x 2.125"H

$69.99

OUT OF STOCK

1200W Max Pro Series 2-Channel Class AB Car Amplifier with Remote Level Control

• 1200W Max
• 600W x 2-Chan. @ 2 Ohms
• 100W x 2-Chan. @ 4 Ohms
• Tri-Mode Speaker Operation Output
• Speaker-Level Inputs
• Automatic Output Power Increase At 2 Ohms

$84.95

OUT OF STOCK

3000W Max, 2-Channel Max Series Amplifier (MXA-244)

Max Series 2-Channel Car Amplifier • 3000W Max • 300W x 2-Chan. @ 2 Ohms • 250W x 2-Chan. @ 4 Ohms • Phase Shift 0-180 • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

$104.95

OUT OF STOCK

600W RMS Power Series Compact 2-Channel Amplifier

• 4 ohms: 200 watts x 2
• 2 ohms: 300 watts x 2
• Bridged, 4 ohms: 600 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

$499.99

OUT OF STOCK

3000W Class AB 2-Channel SQ Series Car Amplifier

• RMS @ 4 Ohm, Mono 1000W x 1CH
• RMS @ 4 Ohm, Stereo 300W x 2CH
• RMS @ 2 Ohm, Stereo 500W x 2CH
• Max Power 3000W
• S/N Ratio >100dB
• THD 0.02%
• Input Sensitivity 0.15V-5V

$299.99

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

2-Channel Amplifiers Information

2-Channel Amplifiers

A 2 channel amplifier is an amp that can operate two channels. It is basically two 1-channel amplifiers in a single box. This unit is usually intended for operating a left speaker and a right speaker.

A channel is the signal and power combination intended for one specific speaker. A car stereo audio system usually has a left channel and a right channel. More advanced audio systems may have separate channels for different types of speakers (midrange, subwoofer, and tweeter) or for rear channels (surround).

A bridged 2 channel amplifier is constructed in such a way that the amplifiers can be set up to operate inline providing the effect of a more powerful one channel amplifier. If durability is a concern, a bridgeable two channel amplifier used for two channels tends to work well because it's likely to have higher quality or just more diodes during bridged operation. Using a more powerful amplifier with the gain turned down is also a good idea if longevity is a concern.