Expert Service 1-877-289-7664 [Hours]

Browse our large selection of car amplifiers, subowoofer amps and more - all at very low prices. Free shipping available too!

All Power Acoustik Car Amplifiers

5000W Max (2500W RMS) BAMF Series Class D 1-Ohm Stable Strappable Monoblock Amplifier

• 1800 Watts RMS x 1 @ 4 ohms
• 2700 Watts RMS x 1 @ 2 ohms
• 4000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 5000 Watts
• Variable low-pass filter: 40 - 200 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

$179.99

IN STOCK

1500W Max, Monoblock RAZOR Series Full Range Class D Car Amplifier

• RMS: 600W x 1 @ 4 ohms, 900W x 1 @ 2 ohms
• Total Peak Power: 1500W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Class D Circuitry
• Dimensions: 4-3/4"W x 10"L x 1-1/3"H

Save 25% on a 4 Gauge Amp Kit with Purchase!

$94.99

IN STOCK

2000W 4-Channel RAZOR Series Full Range Class D Car Amplifier

• 4 ohms: 160 watts x 4-Chan.
• 2 ohms: 250 watts x 4-Chan.
• Bridged, 4 ohms: 500 x 2 chan.
• Max power output: 2000 watts
• 80Hz HP Crossover @ 12dB
• 80Hz LP Crossover @ 12dB

10% Off NVX Universal Bluetooth Controller with Purchase!

$109.99

IN STOCK

1600W Max 4-Channel Class D Crypt Series Amplifier

• RMS Power: 130W x 4 @ 4 ohms, 200W x 4 @ 2 ohms
• Total Peak Power: 1600W
• High and Low Pass Filters
• Dimensions: 3" W x 6" L x 1.5" H

10% Off NVX Universal Bluetooth Controller with Purchase!

$99.99

IN STOCK

7000W Peak (3500W RMS) Edge Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included

• 1100 Watts RMS x 1 @ 4 ohms
• 2300 Watts RMS x 1 @ 2 ohms
• 3500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 7000 Watts
• Variable low-pass filter: 30 - 250 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 12 dB/octave
• Dimensions: 9"W x 16.25"L x 2.25"H

10% Off an XS Power 12-Volt Deep Cycle Battery with Purchase

$224.99

IN STOCK

Only 1 Left!

3500W Monoblock Razor Series Class D Amplifier

• RMS: 900 watts x 1 chan @ 4 ohms, 1400 watts x 1 chan @ 2 ohms,
• Total Peak Power: 3500W
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• 4.75 W x 12.25" L x 1.625" H

$144.99

IN STOCK

2800W Peak (1400W RMS) Edge Series 2-Ohm Stable Class-A/B 5-Channel Amplifier

• 80 Watts RMS x 4 + 380 watts x 1 chan. @ 4 ohms
• 160 Watts RMS x 4 760 watts x 1 chan. @ 2 ohms
• 320 Watts RMS x 2 chan. + 760 watts x 1 chan. @ 4 ohm Bridged
• Total Peak Power: 2800 Watts
• Military Grade PCB w/ PWM MOSFET power supply
• Variable low-pass filters: 30 - 150 Hz
• Variable Bass Boost: 0, 6 or 12 dB bass boost

20% Off of Belva BB2D 2.0 Farad Capacitor with Purchase!

$159.99

IN STOCK

Only 2 Left!

2600W BAMF Series Class D 4-Channel Amplifier

• RMS Power: 200W x 4 @ 4 ohms, 300W x 4 @ 2 ohms
• Total Peak Power: 2600W
• RCA Speaker-Level (Low-Level) Inputs
• Dimensions: 7"W x 11"L x 2"H

Save 25% on an 4 Gauge Amp Kit with Purchase!

$124.99

IN STOCK

1200W 4-Channel RAZOR Series Full Range Class D Car Amplifier

• 4 ohms: 100 watts x 4-Chan.
• 2 ohms: 150 watts x 4-Chan.
• Bridged, 4 ohms: 300 x 2 chan.
• Max power output: 1200 watts

Save 25% on a 4 Gauge Amp Kit with Purchase!

$94.99

IN STOCK

1500W Peak (750W RMS) Edge Series 2-Ohm Stable Class-A/B 4-Channel Amplifier

• 95 Watts RMS x 4 @ 4 ohms
• 185 Watts RMS x 4 @ 2 ohms
• 370 Watts RMS x 2 @ 4 ohm Bridged
• Total Peak Power: 1500 Watts
• Military Grade PCB w/ PWM MOSFET power supply
• Variable low and high-pass filters: 50 - 400 Hz
• Variable Bass Boost: 0, 6 or 12 dB bass boost

Save 10% on a 4 Gauge Installation Kit with Purchase!

$99.99

IN STOCK

3000W 4-Channel Razor Series Class D Amplifier

• RMS: 285 watts x 4 chan @ 4 ohms, 375 watts x 4 chan @ 2 ohms, Bridged, 750 watts x 2 chan @ 4 ohms
• Total Peak Power: 3000W
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• 4.75 W x 12.25" L x 1.625" H

Save 10% on a 4 Gauge Installation Kit with Purchase!

$149.99

IN STOCK

Only 1 Left!

1600W BAMF Series Class D 4-Channel Amplifier

• RMS Power: 125W x 4 @ 4 ohms, 170W x 4 @ 2 ohms, 340W x 2 @ 4 ohms bridged
• Total Peak Power: 1600W
• RCA Speaker-Level (Low-Level) Inputs
• Dimensions: 7"W x 11"L x 2"H

Save 25% on an 4 Gauge Amp Kit with Purchase!

$109.99

IN STOCK

3000W Max (1500W RMS) BAMF Series Class D 1-Ohm Stable Strappable Monoblock Amplifier

• 700 Watts RMS x 1 @ 4 ohms
• 1000 Watts RMS x 1 @ 2 ohms
• 1500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Variable low-pass filter: 40 - 200 Hz, 24 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Subsonic filter: 20 - 50 Hz , 24 dB/octave
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

Save 10% on a 4 Gauge Installation Kit with Purchase!

$139.99

IN STOCK

Only 2 Left!

1200W Peak (600W RMS) Blade Series Class-D Monoblock 2-Ohm Stable Amplifier

• 400 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1200 Watts
• Variable low-pass filter: 40 - 400 Hz, 12 dB/octave
• Variable Subsonic Filter: 10 - 50 Hz, 12 dB/octave
• Hybrid Aluminum Alloy Diecast Heatsink for Optimum Dissipation
• Dimensions: 5"W x 8"L x 2"H

Save 10% on a 4 Gauge Installation Kit with Purchase!

$89.99

IN STOCK

Only 2 Left!

1400W Peak (700W RMS) Edge Series 2-Ohm Stable Class-A/B 2-Channel Amplifier

• 175 Watts RMS x 2 @ 4 ohms
• 350 Watts RMS x 2 @ 2 ohms
• 700 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 1400 Watts
• Military Grade PCB w/ PWM MOSFET power supply
• Variable low and high-pass filters: 50 - 400 Hz
• Variable Bass Boost: 0, 6 or 12 dB bass boost

Save 10% on a 4 Gauge Installation Kit with Purchase!

$99.99

IN STOCK

1200W Peak (600W RMS) Blade Series Class-D 4-Channel 2-Ohm Stable Amplifier

• 100 Watts RMS x 4 @ 4 ohms
• 150 Watts RMS x 4 @ 2 ohms
• 300 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1200 Watts
• Variable high-pass filter: 40 - 400 Hz, 12 dB/octave
• Variable low-pass filter: 40 - 400 Hz, 12 dB/octave
• Hybrid Aluminum Alloy Diecast Heatsink for Optimum Dissipation
• Dimensions: 5"W x 8"L x 2"H

Save 10% on a 4 Gauge Installation Kit with Purchase!

$89.99

IN STOCK

Only 3 Left!

2500W Max (1250W RMS) BAMF Series 5-Channel Class-A/B 2-Ohm Stable Bridgeable Amplifier

• 50 Watts RMS x 4 @ 4 ohms + 850 x 1 chan.
• 100 Watts RMS x 4 @ 2 ohms + 850 x 1 chan.
• 200 Watts RMS x 2 @ 4 ohm + 850 x 1 chan.
• Total Peak Power: 2500 Watts
• Variable low and high-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

Get a 6 Channel Install Kit with Purchase and Save 20%

$169.99

IN STOCK

Only 3 Left!

1800W Max (900W RMS) BAMF Series 4-Channel Class-A/B 2-Ohm Stable Bridgeable Amplifier

• 110 Watts RMS x 4 @ 4 ohms
• 225 Watts RMS x 4 @ 2 ohms
• 450 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1800 Watts
• Variable low and high-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

Save 10% on a 4 Gauge Installation Kit with Purchase!

$139.99

IN STOCK

Only 3 Left!

BAMF-122 3500W 12" BAMF Series Car Sub + BB3000Dv2 1800W RMS Class D BB Series Car Amp + BAK42BL Complete 4 Gauge Amp Wiring Kit

• 3500W 12" BAMF Series Dual-2ohm Car Subwoofer
• 1800W RMS Class D Monoblock BB Series Car Amplifier
• Complete 4 Gauge Amplifier Wiring Kit

$294.97

IN STOCK

Only 2 Left!

1200W Max (600W RMS) BAMF Series 4-Channel Class-A/B 2-Ohm Stable Bridgeable Amplifier

• 75 Watts RMS x 4 @ 4 ohms
• 150 Watts RMS x 4 @ 2 ohms
• 300 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1200 Watts
• Variable low and high-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

Save 10% on a 4 Gauge Installation Kit with Purchase!

$119.99

IN STOCK

Only 3 Left!

Items per page: 20 50 100

Related Categories

Power Acoustik Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Power Acoustik Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.