cant do the install with out it it works as it should

Can;t complain, did what it was design for with no issues ,easy install..

used this kit to install my pioneer head unit worked good had no issues

Extremely easy to install, instructions are included. Thanks Sonic for the free kit!

Kit ended up working like a charm after understanding how it worked and learning that you have to remove half the mounting brackets.

This is a must have to make change out look professional and fit original double din opening.

Fits great in my 2003 S10. No issues whatsoever. Couldnt ask for a better product.

One of the easiest if not the easiest kit I have ever used to install!! Gives off a great fit doesn't leave any gaps or any bulges. Great kit!!!!

When I received this kit I thought it seemed flimsy, but after assembling it and installing the radio in my dash, it looks very professional and clean. The kit keeps the radio looking like a factory install, not a protruding ugly aftermarket job. My buddy had the same radio I have, but a different install kit. The one he used keeps the radio protruding out of the dash. We have the same Avalanche truck, radio but different install kits. He now wishes he had the same kit I used. I definitely will recommend this kit to anyone. Not to mention the price is great as well!

Took stock radio out, followed instruction and used this kit. It works perfect so far. I had to cut the center brace out because I have double din, it cleaned right up and didn't just break away.

Because this is basically a one fits all product, be prepared to do a lot of cutting. Almost all the tabs were removed to fit my Grand Am.

Required a lot of trimming, but it wasn't hard. Installed in a 2004 pontiac bonneville. It did not hold up the radio in the back, so i had to put a thin piece of rubber underneath it to hold the radio even. I just cut up a mudflap, and that worked good.

Completely filled in the empty space around my new JVC.

Perfect fit great quality way better than schoche.

Great product easy to use. Would like to see an optional trim ring for double din radios included.

Great Value.

This made it super easy to install my receiver. It only took me about 45 min to do the complete install.

Securely mounted my CX501 into the dash of my Buick Park Avenue.

Works exactly how it's supposed to, easy to install, and looks great and flush. Makes my double din Pioneer look factory. Sonic included it for free in my order also.

This made my install of the Pioneer head unit look like it was factory install for my Buick Regal. I went all out on this project and I love looking at the results and the beautiful sound in my 1997 Regal.

Used this particular kit a few times now and it's worked well in every install. The holes in the side pieces I needed to widen a little bit for the unit I put in my car, but that was specific to my car and not all others. I installed a double din with subwoofer rcas and my dash isn't deep enough so that was the mod. Very nice kit though

This kit works great for double din radios.

Been doing installs for more than 35 yrs. This is a great product and for the money. Can't go wrong with the GM-K422 and the Sonic service just as stellar! I have ordered other items from Sonic, they have done some amazing things for me and I am grateful! Thank You Sonic Electronix.com

After all was said and done, I was pleased with the outcome of the overall look of this kit. However, I won't hesitate to mention the fact that the instructions/manual that came with it was incredibly vague and I never felt, while preparing it for installation, completely sure that what I was doing was correct. I am referring, in all of this, to the preparation that has to take place before actually installing your 2-DIN receiver. I had to bust out my dremmel tool in order to sand down/cut off unnecessary pieces of plastic (granted yes, this is a "universal" dash kit and so as such "fits" a large number of cars) which I don't think I was ever expecting to have to do. It probably took me about 1/2 hour to an hour of added prep time just to get this ready for installation purposes. But again, like mentioned at the beginning, after all was said and done, I was pleased with the overall outcome and look of the kit in my '02 Chevy Impala. Would recommend to anyone willing to put in the time and effort to prep the kit for your specific car--to anyone else, I would recommend just getting an install kit a lot more specific to your car rather than a universal kit like this one.

Easy to install just plug and go. Works flawless with no problems at all.

I ordered this part but it was missing a couple of pages in the instructions so I contacted them and the were quick to send my the missing pages. Install went fine from there!! Thanks..

fits exactly in the car.

Good mounting kit. Just make sure you know which tabs you need and which ones to cut. Also if you're using it for a double din a good razor blade will cut the middle bar out easily.

This product was alright except for the fact it has to be modified not all notching was complete. But with a sharp knife you can fix the problem

The brackets fit perfectly into my 2003 double din Chevy Tahoe. now spaces or gaps with my aftermarket Jensen head unit

It works!

Several of the tabs had to be removed to make it fit in the double din space on my 03 chevy blazer. also to get the head unit mounted into this kit was a pain but eventually got it. Its all mounted and plugged in now, and it is fairly good fit. not perfect and you can wiggle the stereo if you push hard enough. Its not perfect or anywhere close to easy to install at all, but ive done at least 10 car stereo replacements so i was eventually able to figure it out. With that in mind, for being included for free with the Eclipse CD1200G that i bought, you cant go wrong.

This worked find after a few mods. Yes, i would recommend this.

wonderful!!!

I got this holding my Valor DTS-660W in the dash of my 2002 s-10. Instructions are kinda tricky, but if you follow them closely you will be able to make it work without breaking it. (It is only plastic after all).

i could not use this product because it didn't fit the head unit i purchased which was a double din dvd player.

The face plate looks good, but there is some work to understanding the pieces

Would use the product again in the future

Perfect fit on my truck, I purchased more than one w/ SonicElectronix

Frame worked well and was easy to install.

It allowed for a nice neat installation of a Kenwood DNX-6140 nav unit double-din radio. The center rib has to be cut out for a double-din install but no big deal. Great value.

Easy to use. Went together just right. No problems. Made install a snap

I used this to install a Jensen VM9021TS in my '02 Trailblazer and it worked perfectly. Just make sure your radio is supported properly from the back as the mounting brackets look kinda weak around where they are screwed to the dash. If your radio isn't supported good at the back it looks the mounting brackets might break if you hit some hard bumps.