|
Average Customer Rating is 3.9 out of 5 stars:
  based on 18 Reviews
Share your thoughts with others:
|
Average Attributes Rating:
|
|||||||||||||||||||
| Quick Comparison: | ||||||||||||||||||||
Showing 18 reviews for Dynamat 10005 Wood Roller for Dynamat
| Customer Review Summary for Dynamat 10005 Wood Roller for Dynamat | |||||||||||||||||||||||
|
|||||||||||||||||||||||
| The most helpful favorable review: | The most helpful critical review: | |
 I used this wood roller to press seams as I sewed quilt fabric pieces together - great for presssing without electricity! |
 |
 Do not recommend. Very cheaply built, sides are not concave they cut into whatever deadner you are applying, the actual shaft that holds the roller breaks and seperates very easy, yo ucan get much better quality for much cheaper |
| March 26, 2013 | Cheap, flimsy, bad. |
|
||||||||||||||
|
Review by
earsplitter from Everett, WA
|
Do not recommend. Very cheaply built, sides are not concave they cut into whatever deadner you are applying, the actual shaft that holds the roller breaks and seperates very easy, yo ucan get much better quality for much cheaper
|
|||||||||||||||
| October 30, 2012 | Dynamat 10005 Wood Roller |
|
||||||||||||||
|
Review by
mrenda from Godfrey, IL
|
I used this wood roller to press seams as I sewed quilt fabric pieces together - great for presssing without electricity!
|
|||||||||||||||
| October 23, 2012 | Dynamt roller |
|
||||||||||||||
|
Review by
Mike from New Port Richey FL
|
The roller is low quality but it is needed to properly lay the dynamat.
|
|||||||||||||||
| June 21, 2012 | Great Value |
|
||||||||||||||
|
Review by
Quicksand69 from San Jose CA
|
This product works great. I use it to roll/press on transfer tape in large sheets. The only down fall is that the center pin wares out after a while from the metal to metal grinding. For the price, it works great.
|
|||||||||||||||
| April 16, 2012 | don't install with out it |
|
||||||||||||||
|
Review by
matthew from West Columbia, SC
|
There's no better tool for installing the sound damping. It's so cheap compared to the total cost of your system.
|
|||||||||||||||
| April 3, 2012 | Nice Item |
|
||||||||||||||
|
Review by
Ivan Lee from Penang, Malaysia
|
If looking for roller. This is Good Item and value for money.
|
|||||||||||||||
| March 7, 2012 | Its alright |
|
||||||||||||||
|
Review by
Jay from Mountain Home, AR
|
Once you start using this the metal bracket begins to bend, but i just bent it back with pliers and its just as good. Over all its good for tight spots.
|
|||||||||||||||
| September 21, 2011 | fell apart by the time I could install a Dynamat bulk pack |
|
||||||||||||||
|
Review by
Steven from edmonton, AB, Canada
|
I bought this with a bulk pack of Dynamat Extreme, by the time I had installed most of the Dynamat, the roller had fallen apart and I had to use the handle side of a screwdriver to finish the rest of the job... it probably worked better than the roller at that. This is not the best build quality and wont hold up to any sort of abuse or overuse.
|
|||||||||||||||
| February 2, 2011 | Workds |
|
||||||||||||||
|
Review by
Joseph from Middleburg, FL
|
It does what it's meant to do and haven't had any problems with it.
|
|||||||||||||||
| October 14, 2010 | Easy to use |
|
||||||||||||||
|
Review by
Arturo from Santa Monica, CA
|
This roller tool is super easy to use and it gets the job done well.
|
|||||||||||||||
| July 4, 2010 | Dynamat |
|
||||||||||||||
|
Review by
Car Guy from Somewhere, Tx
|
Easy to install with a simple heat gun and the roller. The heat gun will help the Dynamat stick and the roller will help to form it to the contours of the trunk.
|
|||||||||||||||
| March 5, 2010 | Helpful |
|
||||||||||||||
|
Review by
RossGo from Cold Spring, KY
|
This was helpful in the tight spaces, but the rubber roller served to be more useful overall. I would recommend both, but the rubber one if you only want to get one
|
|||||||||||||||
| December 17, 2009 | Ok |
|
||||||||||||||
|
Review by
Brian from Moorpark, CA
|
This inexpensive roller worked ok for the job. The roller did start to come apart due to the amount of pressure needed to ensure a secure install of the dynamat. Overall, I wouldn't highly recommend this product if you plan on installing a lot of dynamat. I did my entire trunk, so I should've spent the extra $10 for the better roller.
|
|||||||||||||||
| December 13, 2008 | works fine |
|
||||||||||||||
|
Review by
Ruben from Bakersfield, CA
|
this made the job easier and works great when applying dynamat onto flat surfaces.
|
|||||||||||||||
| August 8, 2007 | Great roller |
|
||||||||||||||
|
Review by
apollo from Redmond, OR
|
This is a must have item to apply your Dynamat..This is a strong roller it wont brake if you apply pressure to it..If your buying Dynamat than buy this roller.
|
|||||||||||||||
| March 2, 2007 | Did the job |
|
||||||||||||||
|
Review by
Jarred from White Oak, TX
|
i bought this when i bought some dynamat extreme a while back. Im sure that you could get a roller for your dynamat for cheaper somewhere else, but this roller is great and is made exactly for this task of applying the dynamat on. If you get some dynamat, get this
|
|||||||||||||||
| March 27, 2006 | get your roll on |
|
||||||||||||||
|
Review by
Jesus from Los Angeles, CA
|
great product for easy installation of your dynamat. very recommended.
|
|||||||||||||||
| February 18, 2006 |
|
|||||||||||||||
|
Review by
Eduardo from Jolon, CA
|
upgrade and buy the rubber one.
|
|||||||||||||||
