Expert Service 1-661-257-9993 [Hours]

50% Off Two Pair of Massive Audio 5-1/4" Speakers + JVC 4-Channel Amplifier

Massive Audio DX 5 5-1/4" 2-Way DX Series Coaxial Car Speakers + JVC KS-AX204 600W Max 4-Channel Class AB AX Series Amplifier

We apologize

This item has been discontinued

Item Added to Cart

50% Off Two Pair of Massive Audio 5-1/4" Speakers + JVC 4-Channel Amplifier

Massive Audio DX 5 5-1/4" 2-Way DX Series Coaxial Car Speakers + JVC KS-AX204 600W Max 4-Channel Class AB AX Series Amplifier

$145.90

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$16.99
Add Warranty
3 years of protection

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$29.99

Add
Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

$141.83

Add

Don't see the accessory you're looking for?
View all available accessories for the 50% Off Two Pair of Massive Audio 5-1/4" Speakers + JVC 4-Channel Amplifier.

Get FAST answers from customers ASK a Question See questions answers

Will fit most 6x9" and 5x7" locations,
with appropriate speaker adapter. Click "Related Items" Tab


Massive Audio Store

Massive Audio CA USA has combined flexibility, affordability with accountability and created the perfect OEM replacement speakers for today’s automobile. Massive Audio “DX” series coax OEM replacement drivers have all the “REAL” value you need to upgrade those old worn out factory speakers. If you’re looking for “REAL” value on speakers for that new used AMC “Pacer” or that cool “Matador” you just purchased Massive Audio has got you covered with the “DX” co-axial.

Massive Audio DX 5 (Design inspired by Memphis Car Audio!)

5-1/4" 2-Way DX Series Coaxial Car Speakers
Quantity: 2 (Two Pair)

General Features:

  • 5-1/4" DX Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 320 watts per set / 80 watts each
    • RMS: 160 watts per set / 40 watts each
  • Recommended power range: 10 - 50 watts per channel
  • Laminate Paper cone material
  • Pressed Foam speaker surround
  • Smooth 13mm Hard Dome tweeter
  • CEA-2031 compliant speakers
  • High-temperature 1" ASV voice coils
  • Polyester Fiber Cloth suspension spider
  • High Flux Y30 Ferrite magnet motor structure
  • Integrated crossover with 6dB high pass capacitor
  • Heavy gauge stamped Steel baskets
  • Two piece custom paintable grills
  • Perfect OEM replacement speakers
  • Shallow fitment for today’s vehicles
  • 4 ohms impedance
  • Frequency response: 80 - 20,000 Hz
  • Top-mount depth: 1-3/4"
  • Sensitivity: 90.5 dB
  • 1-year Sonic Electronix Warranty

Priced Per Set of Four Speakers

JVC KS-AX204

600W Max 4-Channel Class AB AX Series Amplifier
Quantity: 1

General Features:

  • AX Series 4-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 40 watts x 4 chan.
    • 2 ohms: 60 watts x 4 chan.
    • Bridged, 4 ohms: 120 watts x 2 chan.
  • Max power output: 600 watts
  • 4/3/2 channel operation
  • Speaker-level (high-level) inputs
  • High-pass filter
  • Low-pass filter (80 Hz, 12 dB/octave)
  • 4 gauge power and ground wiring is required for installation
    • Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Front Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5-1/4"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Laminate-Treated Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
80 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
40 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90.5 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
80 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
1-3/4"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Rear Speaker Specifications

Speaker Size (Rear)

Refers to the size of the speaker.

Every vehicle has standard application sizes. Please contact us for your vehicle's specific speaker sizes if you do not know them.

5-1/4"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as 2-way, 3 drivers = 3-way and so forth. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer (main driver) and the tweeter. Center channel speakers are great for those looking to capture true surround sound in their car.
2-way
Shallow Mount Installation
This means that the speaker is designed to be installed in areas that do not have a lot of space. Shallow mount speakers will typically have a mounting depth of less than 2".
Yes
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Read below for a description of each and other designs.

Cone tweeters are simple, efficient and typically are the most reasonably priced.

Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound.

Semi-dome design is one with a dome placed inside a cone.

A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver.

An "EMIT" tweeter was introduced by industry leader Infinity. "EMIT" is the acronym for Electro Magnetic Induction Tweeter. They are a thin piece of plastic material with an etched voice coil on the surface of them suspended between 2 very powerful Samarium Cobalt magnets. This design is the key to the EMIT tweeters super fast, crystal clear high end sound.

A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.

Dome
Woofer Composition
The woofer cone material is essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene: thermoplastic plastics or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speaker manufacture.
Laminate-Treated Paper
Woofer Surround
The flexible ring around the edge of the woofer cone. Surrounds are usually made of cloth, foam or rubber. Rubber and composites tend to last longer and hold up better in harsh environments.
Foam
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
80 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
40 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.

Efficiency (1W/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other subwoofers to determine which one is "louder".
90.5 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
80 - 20,000 Hz
Impedance (per voice coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit you/your amp best.
4 ohms
Top Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of speaker(magnet) to the bottom of mounting holes on rim of speaker.(Most common application)
1-3/4"
Speaker Grilles
If yes, then package of speakers includes matching speaker grilles. If no, then there are no grilles or included. If optional, then we most likely will also have an optional set of grilles that can be purchased separately.
Yes

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

40 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

60 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

120 watts x 2 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

120 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 1 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $29.99

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

18 Butt Connectors, 2 Ring Terminals, and Zip Ties

Great for connecting your car stereo wires to the harness

Your Price $4.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Items we think you might want
SA68 main
Scosche SA68

The SA689 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into 6" x 8" factory openings.

Your Price $6.99

82-5600 main
Metra 82-5600

•5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 8" Adapter
• Works with 6.5" Speakers
• Installs in 5x7" and 6x8" Locations

Your Price $7.99

82-6901 main
Metra 82-6901

5-1/4" or 6-1/2" Speaker to 6" x 9" Mounting Hole Adapters • Mount your pair of 5-1/4" or 6-1/2" speakers in a 6" x 9" mounting hole

Your Price $5.99

SA69 main
Scosche SA69

The SA69 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into 6 x 9" factory openings

Your Price $10.97

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

KS-AX204_2-DX 5

Weight

11.40lbs

Internal SKU

ksax204_2-dx5

Internal Product ID

100825

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 50% Off Two Pair of Massive Audio 5-1/4" Speakers + JVC 4-Channel Amplifier