Expert Service 1-661-257-9993 [Hours]

Lanzar MXA282

4000W Max, 2-Channel Max Series Amplifier (MXA-282)

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Lanzar MXA282

4000W Max, 2-Channel Max Series Amplifier (MXA-282)

$144.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$16.99
Add Warranty
3 years of protection

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$89.99

Add
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$11.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$39.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Lanzar MXA282.

Get FAST answers from customers ASK a Question See questions answers

  • MAX Series 2-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 1000 watts x 2 chan.
    • 2 ohms: 1650 watts x 2 chan.
  • Max power output: 2000 watts x 2 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power and protection indicators
  • Tuned Bass EQ (0-18 dB bass boost)
  • Advanced Protection Circuitry
  • 2/1 channel operation
  • Speaker-level inputs
  • Anti-Thump Turn-On
  • Variable Phase Shift Control
  • Variable high-pass filter (80-2500 Hz, 24 dB/octave)
  • Variable low-pass filter (35-400 Hz, 24 dB/octave)
  • Frequency response: 15-35000 Hz
  • Dimensions: 10.47"L x 21"W x 2.46"H
  • 4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

1000 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

1650 watts x 2 channels
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not Stable
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

Not Specified

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

Power Specifications - Subwoofer Channel

Peak Power @ 4 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

4000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

3300 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.04%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

80 - 2500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

35 - 400 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
90 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
65 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
35A x 2 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
64%
4 Star
27%
3 Star
0%
2 Star
0%
1 Star
9%

Average Attribution Rating

Durability
4.5
Value
4.8
Features
4.5
Design
4.6
Usability
4.7
Arber

Canada

Overall
Durability
Value
Features
Design
Usability
Amazing...

February 10, 2009

Just hooked this baby up blew my Visonik sub woofers up cause the amp was so power so I had to go buy 3 12000 watt sub woofer to get the max power from it.
They hit hard I just hooked everything up I will say its worth the money.

7 of 8 found this helpful

Was this review helpful to you?

Stephen

Scottsville, KY

Overall
Durability
Value
Features
Design
Usability
Get what you pay for it

January 23, 2010

This amp does look good i will give it that but for power this amp only produces about 1500 watts. The main thing to look at is the amount of fuses it has and how big they are. I have two 10" Pioneer Premier competition subs and they need about 2500 watts from an amp and this only produces 1000. The amp only has 70 fuse amp put together....which sucks. I wouldn't recommend this amp to anyone.

5 of 6 found this helpful

Was this review helpful to you?

ADRIAN

CHICAGO, IL

Overall
Durability
Value
Features
Design
Usability
GREAT AMP!!

December 10, 2009

THIS IS A GREAT AMP AND THE PRICE IS RIGHT!!!
LOVE THE WAY IT MAKES MY MUSIC SOUND AND GREAT POWER........

LOVE THE WAY IT MAKES PEOPLE CLOSE THERE WINDOWS WHEN THEY ARE NEAR MY TRUCK.....LOL

5 of 6 found this helpful

Was this review helpful to you?

Habib

Canada

Overall
Durability
Value
Features
Design
Usability
Amazing Amp...

January 30, 2009

Really stylish amp with high power for any subs out there good price man I love this site if they were selling this at any retail local store would cost over 300$ for sure.

But I good find A++.

5 of 6 found this helpful

Was this review helpful to you?

Tyler

Holland, MI

Overall
Durability
Value
Features
Design
Usability
Great Value

December 19, 2008

Pros: This is the second amp that Ive had from this company and they have yet to let me down. I haven't had any issues with a non working amp. They might not be name brand but they do put out enough power. Ive got this hooked up to 2 12" Kicker CVX's and its pretty loud in a Jeep Cherokee. Definitely worth the money.

Cons: This amp is big, it barely fits on the back of the box for the subs.

5 of 6 found this helpful

Was this review helpful to you?

Tim

Marine, IL

Overall
Durability
Value
Features
Design
Usability
not too shabby

July 10, 2008

i got this amp paired with two 12" flame Q audiobahn subs.it pushes them very well.i was please for this $450 system.this amp has a lot of controls on it and rocks those audiobahns.had it for over a year with no problems.good cheap amp.

5 of 6 found this helpful

Was this review helpful to you?

Daniel

Westminster, CO

Overall
Durability
Value
Features
Design
Usability
One Amazing Amp

March 4, 2008

This amp will blow you away literally! I have it pared up with 2 12 inch Power Acoustik PW3-12Hs and they bump really hard. This really is a great buy if you can afford it.

5 of 6 found this helpful

Was this review helpful to you?

nikiyah

hendersonville, nc

Overall
Durability
Value
Features
Design
Usability
lanzar max pro 4000

October 4, 2014

this is a great amo i now have 2 running 4 lanzar 15s' and the results are amazing great amp i recommend this with any sub over 1200watts

4 of 5 found this helpful

Was this review helpful to you?

Greg

Orange park florida

Overall
Durability
Value
Features
Design
Usability
Very good amp

December 10, 2009

Very good amp had it pushing to Alpine type-R 15s and it slammed them, had it pushing 4 Fosgate 15s p2s make sure you have a good batt or 2 i have a yellow top and i kinetic hc800 but very good amp and the price is a steal

4 of 5 found this helpful

Was this review helpful to you?

thump

cedar rapids iowa

Overall
Durability
Value
Features
Design
Usability
ok

April 1, 2009

i have had this amp for about a month and it works good but it seems to lose it hard hit when you turn it up. It also makes a funny noise out of my speaker. This is the only amp that does this that i have hooked up in my car.

4 of 5 found this helpful

Was this review helpful to you?

X

San Antonio Texas

Overall
Durability
Value
Features
Design
Usability
Great Amp.

August 7, 2009

This amp is really great, it hits hard and its worth the money.

3 of 4 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $62.95

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

Your Price $11.99

Kicker Q-Series RCA Interconnect Cable

16.5 ft. of 2-Channel Interconnects with twisted pair conductors, K-cut gold plated contacts, and hyper-flex technology for easy installation!

Your Price $44.95

NVX XIX25 X-Series Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $14.99

4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

Your Price $16.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

Kinetik HC3800-BLU

Kinetik BLU Series 3800 Watt 12V High Current AGM Car Audio Power Cell

Your Price $351.99

SHURiKEN SK-BT140

4000W 12V High Performance AGM Power Cell Battery

Your Price $329.99

XS Power D2400

12-Volt Deep Cycle AGM Power Cell with 3500 Max Amps

Your Price $309.99

NVX XCAP10H

True 10 Farad Hybrid Stiffening Capacitor with Digital Display and Built-in Distribution Block

Your Price $139.99

Rockford Fosgate RFC10HB

Hybrid 10 Farad Digital Stiffening Capacitor

Your Price $212.99

Stinger SPC5010

10 Farad Pro Digital Hybrid Capacitor

Your Price $144.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.60

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

MXA282

UPC

068888878975

Weight

18.50lbs

Internal SKU

mxa282

Internal Product ID

10232

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Lanzar MXA282