Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale- more products added!

Jensen Power 760

760W Max, 4-Channel Amplifier (POWER760)

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

power7604 thumbnail

Jensen Power 760.4

OUR PRICE: $69.99

View item

Get FAST answers from customers ASK a Question See questions answers

  • Power Series 4-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 75 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • Bridged, 4 ohms: 190 watts x 2 chan.
  • Max power output: 380 watts x 2 chan.
  • MOSFET power supply
  • Design Minimizes Distortion and Reduces Idle Current
  • High Current Bi-Polar Output Transistors
  • LED power, standby, and fault indicators
  • Pass-Thru RCAs
  • 4/3/2 operation
  • Preamp RCA outputs
  • Short Circuit, DC-offset and Thermal Overload Protection Circuitry
  • Variable high-pass filter (40-300 Hz)
  • Variable low-pass filter (40-300 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-60000 Hz
  • 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • Dimensions: 12-1/2"L x 9"W x 2-1/2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Product History:

Jensen Power 760.4 thumbnail
(newest, current model)
Jensen Power-760 thumbnail
(previous model, replaced by Jensen Power 760.4)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

75 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

100 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

190 watts x 2 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

380 watts x 2 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

760 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

380 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Full (AP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 300 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 300 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
60 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
20A x 2 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
64%
4 Star
26%
3 Star
7%
2 Star
0%
1 Star
2%

Average Attribution Rating

Durability
4.3
Value
4.7
Features
4.3
Design
4.2
Usability
4.6

Justin

Huntsville, AL

Overall
Durability
Value
Features
Design
Usability

OK, but sounded nasty.

May 4, 2011

I had this amp installed for about 2-3 weeks before I had to return it. It was paired with 4 Infinity Kappa 6x8 2 way's, and the combination sounded incredibly hollow and disgusting. I assumed it was the amp or the speakers since I installed everything at the same time. A friend and I sat down for 4 hours and installed our amps in each other's cars. After listening to test track, after test track, we found that this amp behaved oddly - the 80-150hz range was more or less falling out. Although more pronounced in my car, it was very disappointing. The Alpine on the other hand, cleared this missing range up slightly and was definitely more clear than the Jensen. The difference was also noticeable when the Jensen was installed in his car - there were lows falling out and muffled words that were previously clear. Also, It also distorts like crazy with the gain turned up. I had to have the gained turned waay down in order to find some level that didn't distort. PLEASE KNOW THAT THIS AMP IS ONLY RATED AT 80 WATTS RMS @ 2 OHM ACCORDING TO ITS CEA06 RATINGS, NOT 100 AS STATED IN THE SPECS. Although an alright amp, I was very disappointed and returned it. Overall, only OK. Good for the value... I guess. It looks cheap and is incredibly light and flimsy. I felt just holding it would bend the flimsy bottom plate. As far as features, It has nothing out of the ordinary. Easy to use, but i doubt it would last more than 6-9 months the way it overheats.

2 of 2 found this helpful

Help our customers find the most helpful reviews

Eric

El Cajon

Overall
Durability
Value
Features
Design
Usability

Jensen Power 760

March 1, 2010

I know very little about electronics. but there is one thing I can say with certainty; I know a good sounding product when I hear it. I have a 12" Kicker sub woofer and the Jensen is doing one hell of a job powering it up. Granted, although I say it sounds terrific, that doesn't mean it's a good product. I have owned the Jensen for about 6 months now I believe and I have not had one problem with it. You'll of course have your electronic aficionados who will bad talk this product into oblivion, but if you're looking for a lot of power for an amazing price, this product, in my best and humblest opinion, is the way to go.

2 of 2 found this helpful

Help our customers find the most helpful reviews

Robert

Finksburg, MD

Overall
Durability
Value
Features
Design
Usability

Great buy for the price

August 14, 2011

I have owned this amp for a few months now and I got to say, it really gets the job done. I have a complete kicker sound system in my car with the exception of the amp. I have this amp powering my two 6.5 Kicker KS front speakers and two 6x9 Kicker KS rear speakers, and it is just amazing how much better they sound on this amp compared to a headunit. Before putting my speakers on the amp, you couldn't hear anything over my two 12" Kicker CVR's, but now it puts out the highs and lows. The only issues I have had with this amp is the overheating problem and its size. Other than that, its a great buy. BTW: cops can hear it alot better too b/c I got pulled over shortly after the install, but he said it sounded good and gave me a warning haha.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Alexander

Belleville, KS

Overall
Durability
Value
Features
Design
Usability

Great 4 channel

June 22, 2011

I have owned this product for over a year now and its an awesome amp! I have always wanted to go a cheap way with my stereos and speakers and this amp but this thing gets the job done. It does get a slight bit hot at times but I think its only cause i've had mine for so long. Make sure you use good quality wiring on this amp or it will get red hot. It says 8 gauge wire rec but I would 6 gauge just in cause and good quality wires and this amp with not disappoint you. Im going to use this amp to power the four Sony speakers in my 04 Dodge Dakota and then have a different amp to run my 12" Pioneer Champion Series Sub. All in all, this sub will work awesome for subs, and/or speakers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Travis R.

Houston , TX

Overall
Durability
Value
Features
Design
Usability

Jensen Power 760 Not what you expect for such a small price !!!

May 17, 2011

I shopped around quite a bit. I needed a 4 channel amp with at least 60 watts but they were all out of my price range. That was until i happened upon the 760. Usually you get what you pay for when it comes to audio equipment but the 760 is an exception. I payed $74.99 basically a dollar per watt but the sound coming out of my system is priceless. I have 6 x 8 Kenwoods ( also purchased from SONIC ) and it sounds like a $ 2000.00 system. ( don't tell anyone but including the radio i have $ 300.00 invested). Sonic is the only place i will shop for car audio anymore. Forget C*********. There you pay almost twice as much for the same products and service. Thanks Sonic.

0 of 0 found this helpful

Help our customers find the most helpful reviews

samuel

Great Neck, NY

Overall
Durability
Value
Features
Design
Usability

Decent Power

April 9, 2011

For an entry level amp.. it does the job quite nicely.. powering Hifonics Zeus 6.5 components. Small in architecture; so, it is a space saver certainly. Will Recommend.

0 of 0 found this helpful

Help our customers find the most helpful reviews

DAVID

WACO, TX

Overall
Durability
Value
Features
Design
Usability

Great amp!

March 22, 2011

I definitely recommend this amp. I installed it in my 2002 Chevy Ext. Cab in January 2011. I mounted it directly to rear wall along with a Class D Mono amp for my subs. I have the Jensen Power 760 running two Pioneer 6.5's and two Pioneer 4x6's. It sounds great. Pros-very good price, easy to install, looks great, easy to use, produces loud, clean sound Cons-the channel inputs were mislabeled on mine. I compared it to some pictures of others and mine was different. Took a little playing around with the RCA's to get the sound going to correct speakers. No big deal. Took one star off the Overall score for that. Thanks SE for running a great website, offering very good prices and for shipping quickly.

0 of 0 found this helpful

Help our customers find the most helpful reviews

xlemosx

Canada

Overall
Durability
Value
Features
Design
Usability

Great Value for Performance

March 18, 2011

I'm sure this is not the most amazing amp out there but it get the job done. My system definitely sounds a lot louder and more clear now. This thing help my front stage keep up with my 750w sub pounding in the back.

0 of 0 found this helpful

Help our customers find the most helpful reviews

shy

jamaica,ny

Overall
Durability
Value
Features
Design
Usability

great amp!!!!!

February 12, 2011

This amp could push hell of power recommend anyone to purchase this,,, hookup to 4 of my 6''8 cerwin vega speakers they pound n loud as hell great amp!!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Mario

Apple Valley, CA

Overall
Durability
Value
Features
Design
Usability

not bad

February 4, 2011

The amp is a little bigger then I wanted but other then that it works good for me

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

junction city, KS

Overall
Durability
Value
Features
Design
Usability

nice

January 26, 2011

i love this amp

0 of 0 found this helpful

Help our customers find the most helpful reviews

Terry

Pickerel Lake, Mn.

Overall
Durability
Value
Features
Design
Usability

Good item, Good price

December 16, 2010

This Amp works great I have it in a 30' Offshore boat, and it works even better than I expected, lots of power and good crisp sound even with the wind blowing by at 70 MPH.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Canada

Overall
Durability
Value
Features
Design
Usability

Sounds great! Can't beat the value

December 6, 2010

I bought this to power some Pioneer Premier TS-A943P 6x9's in the front and some Pioneer TS-A1683 6.5"s in the rear and it does a great job. I can crank it up very loud and the sound is clear without any distortion. Small form factor that I could tuck it under the seat in my truck. Couldn't ask for any more from an $80 4 channel amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

Canada

Overall
Durability
Value
Features
Design
Usability

Good value

November 29, 2010

I find that this amp does the job very well, I am happy with it, I would not have bought another amp, especially because the price cannot be beat

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nate

Dillsburg, PA

Overall
Durability
Value
Features
Design
Usability

Great Amp!

November 18, 2010

Don't even thinking about this amp as being too cheap to be true...It is just amazing. The clarity is definitely there and my stereo has remained the best in the area. =) It currently powers my 2 front component pioneer D Series along with 2 10" subs. I like my sound to be balanced, so the subs are not blasting...But it is still amazing for my taste.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marco

Phoenix, Az

Overall
Durability
Value
Features
Design
Usability

Great Value

November 10, 2010

This is a good amp and has a nice looking image. It produces good watts to power any speakers. I'd recommend it to anyone who is looking for a powerful and inexpensive amp!

0 of 0 found this helpful

Help our customers find the most helpful reviews

tristan

United States Minor Outlying Islands

Overall
Durability
Value
Features
Design
Usability

Jensen Power 760

November 3, 2010

If your looking for a amp with great power this is the one.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kyle

Dallas, tx

Overall
Durability
Value
Features
Design
Usability

Jensen 760 wouldnt buy again

November 1, 2010

This amp worked okay until after about a month one of the channels would quit and come back on. After about 2 months 2 of the channels totally quit working. I'm still using the 2 working channels and they sound okay but I feel a more expensive amp would far beat this one. As soon as I get some more money for one I will be replacing this amp with something name brand. Assuming yours doesnt pre maturely break it's an okay amp if all you have to spend is $60, So thats why I gave it a higher value rating

0 of 0 found this helpful

Help our customers find the most helpful reviews

Beat Master

davenport, FL

Overall
Durability
Value
Features
Design
Usability

Awsome

October 6, 2010

This is an over all awesome product, I have 2 4" Rockford Fostgate, 2 5" Pioneers, 2 6 by 9 Pioneers with a Kenwood KDC-345U. Let me say that my car was rattling all over and I dont even have a Sub in the car. Pros: easy to use and install, and durable. Cons: very heavy, no fan, but does not heat up if put in a cool area of the car like the bottom of a seat.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Cornelius

Winter Park, FL

Overall
Durability
Value
Features
Design
Usability

Greatest

September 27, 2010

I must say for the price. This amp is the BEST. simply amazing. delivers every ounce of power it says it does. burns out my overrated 5-125's and all

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

StreetWires ZN1K-08 8-Gauge Wiring Kit

Great wire for your awesome new amp! Don't forget the RCA's!

Your Price $16.95

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

Your Price $7.99

Small Universal Remote Level Bass Control

The Scosche RLC is a smaller universal bass remote that connects via RCA inputs.

Your Price $11.99

StreetWires FB8

8 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $23.99

Kicker K-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors, hyper-flex technology, and gold plated contacts for maximum signal transfer!

Your Price $29.95

StreetWires ZN7 RCA Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with hyper twist construction, oxygen free copper, and precision machined tips.

Your Price $59.99

Kicker 4-Channel RCA Audio Interconnect Cable

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

Your Price $19.95

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

The Install Bay IB-CAP1F

True 1.0 Farad Car Audio Capacitor for up to 1000W Max

Your Price $37.99

e2 ECAP1 by Scosche - Mid-Level 1 Farad

Digital 1.0 Farad Car Audio Capacitor for up to 1000W Max

Your Price $49.99

Rockford Fosgate RFC1D - Top of the Line 1 Farad

Digital 1.0 Farad Car Audio Capacitor for up to 1000W Max

Your Price $104.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

Product Summary

Manufacturer

Model Number

Power-760

UPC

043258303561

Weight

9.00lbs

Internal SKU

power760

Internal Product ID

10299

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Jensen Power 760