Key Features:
- 15" Solo-Baric L7 Series Subwoofer
- Power Handling:
- Peak: 2000 watts
- RMS: 1000 watts
- Titanium deposit impregnated cone woofer with rolled outer edge
- Santoprene rubber surround
- Full coverage back bracing
- Poly-cotton semi-progressive spider
- Spiralead™ tinsel-lead technology
- Highly-efficient UniPlate™ pole-piece/back plate
- Heat-reducing T-cut top plate
- Solid pole piece
- Cast-aluminum basket
- Spring loaded terminals
- High-temp dual 4 ohm voice coil
- Frequency response: 18-100 Hz
- Sensitivity: 89 dB
- Other search terms: S15L7, S15L74, 15L7, 15L74, 11S15L74, S15L74
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Hifonics BRX2400.1D (Brutus BRX-2400.1D)
2400W RMS Class NextGen Super-D Monoblock Brutus Series Amplifier
Quantity: 1
General Features:
- Brutus Series Monoblock Class NextGen Super-D Car Amplifier
- RMS Power Rating (@ 14.4V):
- 4 ohms: 850 watts x 1 chan.
- 2 ohms: 1600 watts x 1 chan.
- 1 ohm: 2400 watts x 1 chan.
- Sonic Electronix Certified Power Rating*:
- 4 ohms: 1042 watts x 1 chan.
- 2 ohms: 1474 watts x 1 chan.
- 1 ohms: 2008 watts x 1 chan.
- Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +10 dB bass boost)
- Built-in system diagnostics
- Mono Channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
- Lighted connectors and blue wash of light from the underside of the heatsink
- Input sensitivity:
- Level: 200mV-9V
- Variable low-pass filter (35-250 Hz)
- Variable sub-sonic filter (15-35 Hz)
- Frequency response: 10-250 Hz
- CEA-2006 compliant amplifier
- Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
NVX XKIT02
100% Copper, 2-Channel True Spec 1/0 Gauge Amplifier Installation Kit w/ RCA Interconnect and 20 ft Speaker Cable
Quantity: 1
General Features:
- 1/0 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS
- Premium power and ground wire provides optimal power transfer
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
- Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
- Strand Count: 4704
- BC-5W2 Compliant
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 20 ft. (6.1 meters) Frosted Blue 1/0 gauge power wire with seamless crimp ring terminal
- 3 ft. (.91 meters) Frosted Gray 1/0 gauge ground wire with seamless crimp ring terminal
- 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
- 20 ft. (12.2 meters) Frosted Gray/Blue 12 gauge speaker wire
- One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
- One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 150 amp Mini-ANL fuse
- One 5/16" black rubber firewall grommet
- Two 1/0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 18 gauge spade terminal
- Two 18 gauge red butt connector
- Ten 4" black zip ties