Expert Service 1-661-257-9993 [Hours]

JL Audio C2-600x (OPEN BOX COMPLETED)

450W 6.0" 2-Way Evolution C2 Series Coaxial Car Speakers

In Stock. Only 1 Left!
|

List price $199.95

You Save: $94.98 (47.50%)

Thanks , You Pay:

$104.97

with warranty A Pair

+ FREE Shipping in US 48

Order within 20 hrs 19 mins to ship 12/6

Arrives by Thursday, Dec. 8 to zip 20147

Will this fit my ride?

Check Vehicle

Item Added to Cart

JL Audio C2-600x (OPEN BOX COMPLETED)

450W 6.0" 2-Way Evolution C2 Series Coaxial Car Speakers

$104.97

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add
NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

$47.99

Add

Don't see the accessory you're looking for?
View all available accessories for the JL Audio C2-600x (OPEN BOX COMPLETED).

Get FAST answers from customers ASK a Question See questions answers

This is an Open Box Item


We have checked, tested, and confirmed this item to function properly. It contains all the same parts as a new unit, but shows some visible signs of use.
 
This open box product has a 30-day return policy and a 90-day warranty

JL Audio Store
JL Audio Evolution® C2 Coaxial Speaker System
JL Audio Evolution® C2 Coaxial Speaker System

JL Audio Evolution C2 speaker systems deliver an impressive audio performance solution and value. The technology of the Evolution C2 Series has been drawn from JL Audio's experience in woofer and tweeter design. They have been engineered to deliver adequate efficiency while retaining a smooth mid-range response with low-frequency extension. Smoothness of response and the freedom from distortion are factors that make the C2 Series speakers truly one of a kind and enjoyable for everyone, and the resulting product is one that delivers performance for any car audio enthusiast at a price that won't break the bank!

Silk Dome Tweeter

Silk Dome Tweeter

JL Audio C2 tweeters incorporate silk dome diaphragms to deliver smooth high-frequency transitions, on and off axis. Silk is a natural material with inherently good characteristics as a tweeter diaphragm. In addition to being very light in weight, silk exhibits excellent damping properties, which reduces ringing and resonances in the tweeter’s passband, leading to a smooth, pleasing high frequency character free from unnatural sibilance or exaggerated brightness. This is why a Silk Dome Tweeter is preferred by many audiophiles for its overall balance.


JL Audio Quality, Build and Design

JL Audio Quality, Build and Design

JL Audio Evolution C2 coaxial speaker systems feature mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. In addition, the woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. It is this use of proper high-quality components and advances that allow the speaker to perform better than any other speaker in its price range. The C2-600x, specifically, has a respectable frequency response of 59 Hz - 22,000 Hz, a continuous-power handling of 60 watts and a solid efficiency of 90.5 dB, giving it the ability to produce smooth mid-range and highs.


Item Condition: Open Box Complete

  • Item has been installed, used

  •  
    • 6.0" Evolution C2 Series 2-way Coaxial Car Speakers
    • Power Handling:
      • Peak: 450 watts per pair / 225 watts each
      • RMS: 120 watts per pair / 60 watts each
    • Recommended Power Range: 15 - 100 watts per channel
    • Injection Molded, Mica-filled Polypropylene Cone
    • Butyl Rubber Surround
    • 1.00" Voice Coil on Kapton® Former
    • Symmetrical Roll Spider
    • Ferrite Woofer Magnet
    • 0.75" Silk Dome Tweeter
    • Ferrofluid Cooling/Damping Neodymium Tweeter Magnet
    • Natural Roll-Off Low-Pass, 1st Order High-Pass Filter with Electrolytic Capacitor
    • Black steel mesh grille with satin silver accents Included
    • Top-mount depth: 2.38"
    • Cutout Dimensions: 5.00"
    • Nominal Impedance: 4 ohm
    • Efficiency: 90.5 dB @ 1 watt / 1 meter
    • Frequency Response: 59 Hz - 22 KHz ± 3 dB
    • Authorized Internet Dealer
    • 90 Day Sonic Electronix Warranty

    • Priced Per Pair

    Check out the JL Audio C2-600x Owner's Manual

    Product History:

    JL Audio C2-600X thumbnail
    (newest, current model)
    JL Audio VR600-CXi thumbnail
    (previous model, replaced by JL Audio C2-600x (OPEN BOX COMPLETED))

    Speaker Specifications

    Series
    This is the manufacturer product line of speakers.
    Evolution C2 (JL Audio)
    Priced Per
    Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
    Pair
    Speaker Size
    Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
    6"
    Design
    The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
    2-way
    Tweeter Design
    Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
    Dome
    Tweeter Size
    Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
    3/4"
    Tweeter Composition
    Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

    PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

    Silk
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Mica Injected Polypropylene (MIPP)
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Butyl Rubber
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    225 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    60 watts
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    90.5 dB
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    59 - 22,000 Hz
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    2.38"
    Cutout Dimensions
    Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
    5.00"
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
    Speaker Grilles
    A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
    Yes
    Number of Speakers
    This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

    Please refer to the product image and description for further details about the speaker.

    2

    Warranty and Return Policy

    Parts Warranty Duration
    90 days
    Labor Warranty Duration
    90 days
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX 25 ft. of True Spec 12 Gauge Speaker Wire

    100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

    Your Price $39.99

    25 Ft. of JL Audio 12 Gauge (AWG) Speaker Cable

    25 Feet of true gauge JL Audio speaker wire.

    Your Price $29.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    NVX XTGSP2 Tone Generator and Speaker Polarity Tester

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Belva Five Piece Installer's Panel Removal Tool Kit

    Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

    Your Price $11.99

    Universal Wire Puller & Grabber

    Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

    Your Price $7.99

    Encore Universal Four Door Power Door Lock Kit

    Add Power Door Locking and Unlocking while you have the Door Panels removed

    Your Price $29.99

    NVX SDDK12 Door Kit

    Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

    Your Price $47.99

    Dynamat Xtreme Door Kit 10435

    Enough sound dampening to cover most doors!

    Your Price $60.97

    Stinger Roadkill Door Kit

    Use this to eliminate rattle from your doors!

    Your Price $39.95

    NVX Sound Dampening Rubber Roller

    Install your Sound Dampening with ease using this heavy duty rubber roller!

    Your Price $7.99

    12-10 AWG Butt Connectors

    These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

    Your Price $5.99

    12-10 AWG Quick Disconnect Connectors

    These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

    Your Price $11.99

    Browse 1 question and 1 answer
    Hide answersShow all answers | Sort by
    What would you set the HP filter at on the HU for these?
    A shopper on Dec 27, 2014
    Best Answer: Hello,

    That is completely determined by Preference and the Overall Setup. If you do NOT have a subwoofer, then you may not want to set the HPF at all, or you will loose ALL low end in the vehicle. However, if you intend to simply 'protect' the speaker from low end frequencies that it is not meant to play, then you look at the Frequency Response of the speaker (59 Hz - 22 KHz) and that essentially tells you where to set the HPF, ~60hz .
    If you DO have a subwoofer, however, then have the Speakers 'pick up' where the subwoofer leaves off. For example, if the subwoofer's LPF is set to ~120hz , then have the speaker pick up at ~100-120hz, for a proper full range setup.
    Reply · Report · Customer SStaff on Dec 27, 2014
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    C2-600X

    Weight

    5.00lbs

    Internal SKU

    LS-c2600x-OBCRA242931

    Internal Product ID

    105869

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: JL Audio C2-600x (OPEN BOX COMPLETED)