Expert Service 1-877-289-7664 [Hours]


6x9" 4-Way A-Series Coaxial Speakers

We apologize

This item has been discontinued

Item Added to Cart


6x9" 4-Way A-Series Coaxial Speakers


Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.


Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.


NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!



Don't see the accessory you're looking for?
View all available accessories for the Pioneer TS-A6985R (OPEN BOX COMPLETE).

Get FAST answers from customers ASK a Question See questions answers

This is an Open Box Item

We have checked, tested, and confirmed this item to function properly. It contains all the same parts as a new unit, but shows some visible signs of use.
This open box product has a 30-day return policy and a 90-day warranty

Quality Sound by Pioneer

The A-Series speakers are your solution to upgrading those worn out factory speakers. The cone is composed of a multilayer mica matrix material that is rigid enough to resist warping during playback, but soft enough to produce smooth and subtle mids. The soft dome tweeter uses Wave Guide technology in order to increase the sensitivity, thus providing great articulation in the high frequency spectrum. The passive crossover network will blend the mid-woofer and tweeter for a perfectly balanced sound all throughout the audible frequency range. These speakers are designed with a wide frequency response to ensure you are hearing every note of your favorite songs. The high temperature voice coil will reduce distortion by dissipating heat quickly, which will protect your investment for years to come. These speakers can be ran off either a head-unit or an amplifier, making them very versatile and applicable for most vehicles. Available in most common sizes, the A-Series speakers make for a great audio upgrade.

Best Bang for Your Buck!
Clarion SRG6953R
Pioneer TS-A6985R
6" x 9"
Speaker Size
100 watts
Power Handling
91 dB
Speaker Rating
5-way 4-way
1-inch 0.75-inch
2-13/16" 3-1/8"
$59.99 $74.99

Item Condition: Open Box Complete

  • Item has been installed, used
    • 6" x 9" A-Series 4-Way Coaxial Speakers
    • Power Handling:
      • Peak: 550 watts per pair / 275 watts each
      • RMS: 200 watts per pair / 100 watts each
    • Multilayer Mica Matrix cone material
    • Elastic Polymer speaker surround
    • Soft Dome tweeters with Wave Guide for increased sensitivity
    • High temperature voice coil
    • 4 ohms impedance
    • Frequency response: 27-38,000 Hz
    • Top-mount depth: 3-1/8"
    • Sensitivity: 91dB
    • 1-year Sonic Electronix Warranty

    Priced Per Pair

    Speaker Specifications

    This is the manufacturer product line of speakers.
    A-Series / TSA (Pioneer)
    Priced Per
    Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
    Speaker Size
    Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
    6" x 9"
    The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
    Tweeter Design
    Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
    Tweeter Size
    Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Mica Reinforced Cellular Glass-Fiber
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Elastic Polymer
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    275 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    100 watts
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    91 dB
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    27 - 38000 Hz
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    Cutout Dimensions
    Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
    6" x 8-5/8" 
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
    Speaker Grilles
    A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
    Number of Speakers
    This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

    Please refer to the product image and description for further details about the speaker.


    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    4 Star
    3 Star
    2 Star
    1 Star

    Average Attribution Rating

    Accessory Tools and Products

    Accessories added

    NVX 25 ft. of True Spec 12 Gauge Speaker Wire

    100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

    Your Price $39.99

    Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

    You need speaker wire to connect your speakers!

    Your Price $49.95

    Belva 23 ft. of True Spec 12 Gauge Speaker Wire

    100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

    Your Price $14.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    NVX XTGSP2 Tone Generator and Speaker Polarity Tester

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Encore Universal Four Door Power Door Lock Kit

    Add Power Door Locking and Unlocking while you have the Door Panels removed

    Your Price $29.99

    NVX SDSK2 Speaker Kit

    Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

    Your Price $14.99

    Stinger Roadkill Speaker Kit

    Use this to eliminate rattle from your speakers!

    Your Price $10.99

    NVX Sound Dampening Rubber Roller

    Install your Sound Dampening with ease using this heavy duty rubber roller!

    Your Price $7.99


    Creates a tight seal around the speaker for enhanced audio quality and imaging.

    Your Price $29.99

    XTC 6" x 9" Foam Speaker Baffles

    Compresses and forms to the shape of most installations and reduces panel vibrations.

    Your Price $12.99

    Sonic Sub Boxes 6X9_PANDA_BOX

    6" x 9" Wedge Box (Priced Individually)

    Your Price $14.99

    Atrend 6X9PR

    1 Pair of 6" X 9" Speaker Boxes Made with 3/4" Hardwood MDF

    Your Price $24.95

    Browse 2 questions and 15 answers
    Hide answersShow all answers | Sort by
    Why did you choose this?
    Sonic Electronix Store
    will fit in Volvo 850 sedan on rear deck / shelf
    larry on Sep 16, 2015
    Quality and reputation of the Pioneer products I have previously purchased...
    Michelle R on Dec 12, 2014
    "most watts in that price range"
    Chris W on Mar 18, 2015
    great quality low price
    Joshua B on Nov 24, 2014
    Hello, i just bought 6 speakers of this pioner TS-A6985R and I would like what is the best way to wire them to a Hifonics BRX640.4 I'm install them in a party buss that's why I got the 6 speakers,I only found wire diagrams for 4 speakers not for 6? any help would be great thanks
    sergio g on Sep 12, 2014
    Best Answer: I had the same problem, however it is not that difficult, you do need to buy some extra wires (shouldnt cost more than $10). To make the 6 RCA cables fit in the 4 RCA outputs you need to buy 2 RCA Y-cables (2 RCA input to 1 RCA output). When you go to plug the cables in simply plug the 2 red RCA's into one y cable and 2 Black RCA's into the other then plug in the cables to the head unit. Here is the link to the type of cable you need.
    Reply · Report · Vincent I on Sep 12, 2014
    · Add Answer · I Have This Question Too (0)

    Product Summary


    Model Number






    Internal SKU


    Internal Product ID


    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Pioneer TS-A6985R (OPEN BOX COMPLETE)