Expert Service 1-661-257-9993 [Hours]

Infinity Kappa 682.11cf (OPEN BOX COMPLETE)

6" x 8" / 5" x 7" 2-Way Kappa Series Coaxial Car Speakers

We apologize

This item has been discontinued

Item Added to Cart

Infinity Kappa 682.11cf (OPEN BOX COMPLETE)

6" x 8" / 5" x 7" 2-Way Kappa Series Coaxial Car Speakers

$109.99

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add
NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

$47.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Infinity Kappa 682.11cf (OPEN BOX COMPLETE).

Get FAST answers from customers ASK a Question See questions answers

This is an Open Box Item


We have checked, tested, and confirmed this item to function properly. It contains all the same parts as a new unit, but shows some visible signs of use.
 
This open box product has a 30-day return policy and a 90-day warranty


Also Available as Open Box (Like New) CLICK HERE




High Fidelity Kappa Series

The 2-ohm nominal impedance of the Infinity Kappa 682.11cf coaxial speakers allows compensation for any added resistance in thin factory-installed speaker wiring and provides more output than factory speakers in its class. The high sensitivity of the Kappa Series makes it ideal for upgrading a factory-installed system’s existing speakers with very noticeable fidelity improvements. With a modern look, articulate highs and strong lows, the Kappa series speakers are perfect for any factory or aftermarket sound system. Pick yours up today at SonicElectronix.com!


The Sound of quality

Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.


Item Condition: Open Box Complete

  • Item has been installed, used, and has installation marks.
  • General Features:

    • 6" x 8" / 5" x 7" Kappa Series 2-Way Car Speakers
    • Power Handling:
      • Peak: 600 watts per pair / 300 watts each
      • RMS: 200 watts per pair / 100 watts each
      • Recommended Minimum Power: 25-150 watts each
    • Carbon Injected Glass Fiber cone material
    • Plus One cone technology offers more cone area than other speakers in its class
    • Rubber speaker surround
    • 1" Soft Dome edge-driven Fabric tweeter construction
    • Adjustable, 0 or +3dB push-button tweeter level attenuation control
    • UniPivot tweeter allows you to aim the tweeter at the listener for better imaging
    • High temperature voice coil reduces distortion
    • Vented magnet and motor assembly cool the voice coil
    • Gold-plated, screw-type speaker terminals for a secure connection
    • Injected Carbon Glass Matrix (iCGM) speaker frames
    • High-quality passive crossover components
    • Protective magnet boot cover
    • 2 ohms impedance
    • Frequency response: 40-25,000 Hz
    • Top-mount depth: 2-3/8"
    • Sensitivity: 94dB
    • Authorized Internet Dealer
    • 3-year Manufacturer's Warranty

    Priced Per Pair

    Speaker Specifications

    Series
    This is the manufacturer product line of speakers.
    Kappa (Infinity)
    Priced Per
    Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
    Pair
    Speaker Size
    Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
    6" x 8" (also mounts in most 5" x 7" locations)
    Design
    The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
    2-way
    Tweeter Design
    Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
    Dome
    Tweeter Size
    Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
    1"
    Tweeter Composition
    Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

    PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

    Cloth
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Carbon Composite
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Rubber
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    300 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    100 watts
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    94 dB
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    40 - 25000 Hz
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    2 ohms
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    2-3/8"
    Bottom-Mount Depth
    The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
    3"
    Cutout Dimensions
    Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
    4-7/8" x 7-1/8" 
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
    Speaker Grilles
    A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
    No

    Specials with this Item

    Promotions
    Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
    VIP Guarantee

    Warranty and Return Policy

    Parts Warranty Duration
    90 days
    Labor Warranty Duration
    90 days
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX 25 ft. of True Spec 12 Gauge Speaker Wire

    100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

    Your Price $39.99

    Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

    You need speaker wire to connect your speakers!

    Your Price $37.85

    Belva 23 ft. of True Spec 12 Gauge Speaker Wire

    100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

    Your Price $14.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    NVX XTGSP2 Tone Generator and Speaker Polarity Tester

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Belva Five Piece Installer's Panel Removal Tool Kit

    Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

    Your Price $11.99

    Universal Wire Puller & Grabber

    Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

    Your Price $7.99

    Encore Universal Four Door Power Door Lock Kit

    Add Power Door Locking and Unlocking while you have the Door Panels removed

    Your Price $29.99

    NVX SDDK12 Door Kit

    Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

    Your Price $47.99

    Dynamat Xtreme Door Kit 10435

    Enough sound dampening to cover most doors!

    Your Price $60.97

    Stinger Roadkill Door Kit

    Use this to eliminate rattle from your doors!

    Your Price $39.95

    NVX Sound Dampening Rubber Roller

    Install your Sound Dampening with ease using this heavy duty rubber roller!

    Your Price $7.99

    IA-FAST-5X7CA

    Creates a tight seal around the speaker for enhanced audio quality and imaging.

    Your Price $24.99

    Browse 3 questions and 10 answers
    Hide answersShow all answers | Sort by
    Why did you choose this?
    Sonic Electronix Store
    I'm hoping they match up well with my front Infinity speakers. This is not a review on the Kappa's...
    Malice101 on May 27, 2016
    Highly rated for factory replacement for use with factory head unit, especially in newer Ford F-150.
    Kevin M on Jun 25, 2015
    Got these to match my components. Sound good for the price. Don't distort like the components.
    Adolfo A on Aug 24, 2015
    tried something new, they sound great
    Brian N on Apr 14, 2015
    Hi, I have two questions:
    1) Do you price match? BiteBee is $83.00 total incl. shipping on ebay for this same amp.
    2) Available, ships at a later date. How much later does this mean?

    Okay, maybe a third question. How well does this choice compare with your other options for driving my 4 infinity kappa 5x7 speakers that I got from you folks? Got any other amp suggestions in a nice affordable range like this one?

    Thank you,
    Jon
    Jon M on Nov 8, 2016
    Infinity 682.11cf
    Infinity 682.11cf
    Hitron HKA1000.4
    Hitron HKA1000.4
    Best Answer: Hello,

    These threads are meant for product questions, and are submitted to customers that have the product. Obviously those customers cannot answer questions related to orders or price matching; So please submit your inquiry to [email protected] or call our Sales Team at 1-877-289-7664 opt 1 .
    Reply · Report · Rick MStaff on Nov 8, 2016
    · Add Answer · I Have This Question Too (0)
    I have two pairs of Infinity Kappa 682.11cf that I plan on installing in my 2007 mustang. I am looking at using a 4 channel to power them. The two that I am considering are Infinity KAPPA FOUR and the NVX JAD800.4 does anyone have any thoughts on this? I also plan on running a mono for the subs Infinity Kappa 100.9W.
    Zach H on Apr 1, 2015
    Infinity 682.11cf
    Infinity 682.11cf
    Infinity KAPPA-FOUR
    Infinity KAPPA-FOUR
    NVX JAD800.4
    NVX JAD800.4
    Best Answer: I have used many of the nvx products and have been nothing but satisfied. I be leave the nvx amps are underrated on the power I can't see going wrong with it
    Reply · Report · justin m on Apr 1, 2015
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    682.11cf

    Weight

    6.20lbs

    Internal SKU

    LS-68211cf-OBCRA231831

    Internal Product ID

    106195

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Infinity Kappa 682.11cf (OPEN BOX COMPLETE)