Expert Service 1-661-257-9993 [Hours]

Lanzar VW15D (OPEN BOX COMPLETE)

1000W 15" Vibe Series Dual 4 ohm Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Lanzar VW15D (OPEN BOX COMPLETE)

1000W 15" Vibe Series Dual 4 ohm Subwoofer

$49.99

Keep Shopping

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

$37.85

Add
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$94.95

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Lanzar VW15D (OPEN BOX COMPLETE).

Get FAST answers from customers ASK a Question See questions answers

This is an Open Box Item


We have checked, tested, and confirmed this item to function properly. It contains all the same parts as a new unit, but shows some visible signs of use.
 
This open box product has a 30-day return policy and a 90-day warranty

Item Condition: Open Box Complete

  • Item has been used, and has box damage.
    • 15" Dual 4 ohm Vibe Series Subwoofer
    • Power Handling:
      • Peak: 2000 watts
      • RMS: 1000 watts
    • Black polypropylene cone woofer
    • Treated foam edge suspension
    • Chrome back plate cover
    • Rubber magnet boot cover
    • 2-1/2" High temperature dual voice coil
    • 120oz. Magnet structure
    • Frequency response: 40-3000 Hz
    • Sensitivity: 90 dB
    • 1-year Manufacturer's warranty

    Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    Vibe (Lanzar)
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    15"
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    2000 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    1000 watts
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Dual
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Voice Coil Diameter
    Diameter of voice coil, usually measured in inches.
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    40 - 3000 Hz
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    90 dB
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle
    Main Cone Color
    This is the color of the speaker's or subwoofer's cone.
    Black
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Polypropylene
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Treated Foam
    Magnet Structure
    Defines the overall structure of the subwoofers magnet.
    Subwoofer Grille
    Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
    No
    Re-Cone Kit Available
    Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
    No

    Recommended Enclosure Specifications

    Optimum Sealed Box Volume
    This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    Optimum Ported Box Volume
    This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No

    Electromechanical Parameters

    Free-Air Resonance (Fs)
    The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
    Equivalent Compliance (Vas)
    This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
    Total Speaker Q Value (Qts)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
    Electrical Q Value (Qes)
    The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
    Electrical Resistance of Voice Coil (Re)
    Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
    Mechanical Q Value (Qms)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
    Efficiency Bandwidth Product (EBP)
    This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

    Specials with this Item

    Promotions
    Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

    Warranty and Return Policy

    Parts Warranty Duration
    90 days
    Labor Warranty Duration
    90 days
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    25 ft. of Streetwires 12 Gauge Speaker Cable

    You'll need speaker wire to hook up that new subwoofer!

    Your Price $37.85

    Belva 23 ft. of 12 Gauge Speaker Wire

    Ultra-flexible PVC blended jacket for easy installation.

    Your Price $14.99

    Dynamat Sound Dampening Trunk Kit

    Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

    Your Price $94.95

    2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Universal rubber roller to make it easy to install sound dampening.

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    Cordless Multi-Functional Heat Tool Soldering Iron Kit

    Continuous working lock allows you to work without holding down trigger.

    Your Price $74.99

    1mm All Purpose Solder

    Solder is all purpose for use on most projects where solder is needed.

    Your Price $7.99

    12 oz. Can of Adhesive Spray

    Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

    Your Price $8.99

    Spring Post Terminal Cup

    Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

    Your Price $3.99

    Gold Plated Dual Terminal Banana Plug Connector

    Enables an expandable, secure connection accepting up to 8 gauge wire.

    Your Price $1.99

    Scosche SPL Meter

    Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

    Your Price $21.99

    1 Lanzar VW15D (OPEN BOX COMPLETE) Subwoofer

    Mono Amp

    2 Channel Amp - Bridged

    2 Lanzar VW15D (OPEN BOX COMPLETE) Subwoofers

    Mono Amp

    Mono Amp - Option 1

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp - Bridged

    3 Lanzar VW15D (OPEN BOX COMPLETE) Subwoofers

    Mono Amp

    4 Channel Amp

    4 Lanzar VW15D (OPEN BOX COMPLETE) Subwoofers

    Mono Amp

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp

    Browse 4 questions and 7 answers
    Hide answersShow all answers | Sort by
    Why did you choose this?
    Sonic Electronix Store
    I chose this speaker as a replacement for a sub fbox that had recently blown. I have had the sub box for maybe about 10-15years. Just needed a little something to deliver some bass. Nothing to brag about just simple replacement of a woofer for an old box.
    kevin s on Aug 13, 2015
    What is the optimum enclosure size for one of these drivers?
    Kyle F on May 23, 2015
    Best Answer: I had them in a 3 cubic ft box. I had 5 of them. They blow very easy so only run 400 watts rms. I have blown all 5 of mine from over power. They are realistically a 300 watt rms subwoofer.
    Reply · Report · Mackenzie S on May 23, 2015
    · Add Answer · I Have This Question Too (0)
    my lanzar vibe has dvc how do i iwre it to 2ohm?
    A shopper on Aug 17, 2014
    Best Answer: Assuming you have dual 4 ohm voice coils. You can simply run a jumper wire connecting both voice coils positive to positive and negative to negative thus wiring them in parallel which will reduce the ohms to 2. Then connect your amplifier to either side of the speaker just like it was a single voice coil. + to + and - to -. Hope that is clear enough
    Reply · Report · Bryce H on Aug 17, 2014
    · Add Answer · I Have This Question Too (0)
    which Capacitor is good for 2 of these subwoofer?
    themis on Oct 1, 2014
    Best Answer: Hello Themes,

    Despite what the sub's figures may suggest, it will not require a capacitor greater than 1 Farad. We recommend the Belva BB1D .

    Belva BB1D
    Reply · Report · Customer SStaff on Oct 4, 2014
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    VW15D

    Weight

    17.00lbs

    Internal SKU

    LS-vw15d-OBCRA233185

    Internal Product ID

    106205

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Lanzar VW15D (OPEN BOX COMPLETE)