Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
800W Peak (400W RMS) DRVN Series Class-D 2-Ohm Stable Monoblock Power Amplifier
• RMS: 4 ohm: 250 Watts x 1 chan.
• RMS: 2 ohm: 400 Watts x 1 chan.
• Total Peak Power: 800 Watts
• Speaker-level (high-level) inputs
• Variable low-pass filter: 50 - 200 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
• RMS: 4 ohm: 250 Watts x 1 chan.
• RMS: 2 ohm: 400 Watts x 1 chan.
• Total Peak Power: 800 Watts
• Speaker-level (high-level) inputs
• Variable low-pass filter: 50 - 200 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
Internal Product ID:
107789
5 star |
|
67% |
4 star |
|
33% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
4.7 |
Value |
|
4.7 |
Features |
|
4 |
Design |
|
4.4 |
Usability |
|
4.4 |
Amped-up
This is the second time that I've bought this Amp...because its a great name brand... just cant go wrong with something thats been around for years...I would and always recommend JVC over anything else... specs are the same as a high priced other brand... and besides.. Sonic Electronix is by far the cheapest around... believe me I shop prices... so give it a try, this AMP truly is a lot of BOOM for the buck....
3
found this helpful.First Amp....
I wasn't sure what to expect, this was my first amplifier purchase and installation. Using the KS-DR3001D to push two JBL GT5-10s in a premade MDF sealed box. Its been in use for a couple of weeks and I couldn't be happier with the results. I'm using the crossover capabilities on my receiver and limited use of the "bass boost" from the amp. I'm not noticing any distortion or noise coming from the unit. The KS-DR3001D can push the subs hard when asked. Will update in the future after I have a few more months of use.
1
found this helpful.Solid amp
Great little amp for pushing a single 12 or low powered 10s.
Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(36)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(27)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(6)
$99.99
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
(9)
$399.96
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
Add a 2-Channel amp without replacing your factory radio
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing