Expert Service 1-661-257-9993 [Hours]

Audiopipe Amp and Soundstream Subwoofer Complete Upgrade Package

APK-250.2 3000W 2-Ch Amplifier + R1.122 12" Dual 2 Ohm Subwoofer + TC6KIT-0B 1/0 Gauge OFC Amplifier Wiring Kit + BBIC5 2-Ch RCA Cable

We apologize

This item has been discontinued

Item Added to Cart

Audiopipe Amp and Soundstream Subwoofer Complete Upgrade Package

APK-250.2 3000W 2-Ch Amplifier + R1.122 12" Dual 2 Ohm Subwoofer + TC6KIT-0B 1/0 Gauge OFC Amplifier Wiring Kit + BBIC5 2-Ch RCA Cable

$340.05

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$38.99
Add Warranty
3 years of protection

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$97.99

Add
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$34.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Audiopipe Amp and Soundstream Subwoofer Complete Upgrade Package.

Get FAST answers from customers ASK a Question See questions answers

Audiopipe Car Audio Store

Audiopipe APK-250.2

2000W APK Series 2-Channel Class D Car Amplifier
Quantity: 1

General Features:

  • APK Series 2-Channel Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 300 watts x 2 chan.
    • 2 ohms: 470 watts x 2 chan.
    • Bridged, 4 ohm: 930 watts x 1 chan.
  • Max power output: 2000 watts
  • High purity copper trace circuit boards
  • Wired remote bass level control included
  • Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
  • 2 or Mono channel operation
  • Variable low-pass filter (50-5,000 Hz, 12 dB/octave)
  • Subsonic filter (12 dB at 20-5,000 Hz)
  • 0/1 gauge power and ground wiring is required for installation
    • Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
  • Dimensions: 9"W x 18"L x 2.5"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the APK-250.2 Owner's Manual



Soundstream R1.122

850W 12" Reference R1 Series Dual 2 Ohm Subwoofer
Quantity: 1

General Features:

  • 12" Dual 2 Ohm Reference Series Subwoofer
  • Power Handling:
    • RMS: 850 watts
  • Recommended power range: 200 - 850 watts RMS
  • Die-Cast Aluminum Soundstream Reference R1 Frame
  • Oversaturated Motor Sturcture for Increased Magnetic Strength
  • 12mm Vented T-Yoke & Top Plate Improve Low Frequency Dynamics
  • 317oz Double Stack Magnet, T-Yoke & Top Plate
  • 2.5" 4-Layer Voice Coil w/ Large Gauge Wire Increases Power Handling
  • High-Temperature Tollerance Adhesives Resist Thermal Failure
  • Inverted Roll Polyether Foam Surround w/ UV & Chemical Protection
  • Oversized Concave IMPP Primary Cone Increases Effective Surface Area
  • Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
  • Acoustic Canceling Polyvinyl Chloride Gasket & Trim Ring
  • Nickel Plated 12ga Spring-Loaed Compression Wire Terminals
  • Stitched Voice Coil Leads Prevent Potential Damage
  • Dual Poly-Cotton Suspension Dampen Violent Accelerations
  • Top-mount depth: 7.875"
  • Sensitivity: 82.9 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

TruConnex TC6KIT-0B by Metra

1/0 Gauge Full Spec OFC Amplifier Wiring Kit for Systems up to 1500 Watts
Quantity: 1

General Features:

  • 1/0 gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1500 watts
  • Premium Oxygen Free Copper power and ground wire provides optimal power transfer
  • Terminals are Nickel-plated for excellent signal transfer
  • ANL Fuse holder offers ideal protection
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Package Includes:

  1. 17 ft. of 1/0 AWG Red power cable
  2. 3 ft. of 1/0 AWG Gray ground cable
  3. 17 ft. of Blue remote turn-on wire
  4. In-line mini ANL fuseholder
  5. 60 Amp mini ANL fuse
  6. Ring Terminals
  7. Ground Terminals
  8. Vinyl Cable Ties
  9. Screws
  10. Butt connectors
  11. Spade Terminals
  12. Grommets

Belva BBIC5

5m (16.4 Ft) 2-Channel RCA Audio Interconnect Cable (CCA)
Quantity: 1

General Features:

  • Audio Interconnect Cable (CCA)
  • 2-Channel RCA, perfect for stacking, strapping or connecting amps
  • Helical Twist construction minimizes noise and interference
  • Patented high tolerance compact machined metal end
  • Packed in resealable bag
  • Length: 5m (16.4 feet)
  • Also available in 9.8 Ft.
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

470 watts x 2 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

930 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

3000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

930 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
1/0 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
2 pairs
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 5000 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
50 - 5000 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
105 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $97.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.99

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $94.97

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

APK-250.2_R1.122_TC6KIT-0B_BBIC5

Weight

52.95lbs

Internal SKU

apk2502_r1122_tc6kit0b_bbic5

Internal Product ID

108793

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Audiopipe Amp and Soundstream Subwoofer Complete Upgrade Package