Expert Service 1-661-257-9993 [Hours]

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

We apologize

This item has been discontinued

Item Added to Cart

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

$311.65

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$38.99
Add Warranty
3 years of protection

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

$37.85

Add
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$94.95

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure.

Get FAST answers from customers ASK a Question See questions answers

Infinity Store

Infinity REF1200S

1000W 12" Reference Series Shallow Mount Single Voice Coil Selectable Smart Impedance Car Subwoofer
Quantity: 1

General Features:

  • 12" Reference Series Shallow Mount Single Voice Coil Selectable Smart Impedance™ Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 250 watts
  • Polypropylene Cone
  • Rubber Surround
  • 2" Single Voice Coil
  • Impedance: 2 or 4 ohms (Selectable)
  • Top-mount depth: 3.25"
  • Overall Diameter: 12.25"
  • Cutout Diameter: 11.125"
  • Frequency Response: 27 - 175 Hz
  • Sensitivity: 92 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually


TS Parameters

  • Switch Set to 2Ω
    • REVC: 1.84Ω
    • LEVC: 0.65 mH
    • SD: 502.73 cm²
    • BL: 9.02Tm
    • VAS: 97.43 l
    • CMS: 274.00 µM/N
    • MMS: 177.46 gr
    • FS: 22.80 Hz
    • QMS: 6.24
    • QES: 0.57
    • QTS: 0.53
    • HAG: 8.00 mm
    • HVC: 23.30 mm
  • Switch Set to 4Ω
    • REVC: 4.16Ω
    • LEVC: 0.71 mH
    • SD: 502.73 cm²
    • BL: 12.87 Tm
    • VAS: 97.56 l
    • CMS: 275.00 µM/N
    • MMS: 177.02 gr
    • FS: 22.82 Hz
    • QMS: 3.57
    • QES: 0.64
    • QTS: 0.54
    • HAG: 8.00 mm
    • HVC: 23.30 mm

For more information on the Thiele and Small Parameters, visit our T/S Parameters Article

Check out the Infinity REF1200S Owner's Manual

Kicker KX200.2 (40KX200.2)

200W RMS KX Series 2-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX2002)
Quantity: 1

Kicker Always Exceeds Rated Power

General Features:

  • KX Series 2-Channel Class D-IC Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 2 chan.
    • 2 ohms: 100 watts x 2 chan.
    • Bridged, 4 ohms: 200 watts x 1 chan.
  • Max power output: 400 watts x 1 chan.
  • High-efficiency regulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (Variable 0-18 dB @ 40 Hz)
  • Soft start turn-on
  • 2 and mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • Equipped with FIT (Fail-Safe Integration Technology) to accept output from virtually any source
  • FIT’s lab-grade, balanced differential inputs offer best possible noise rejection
  • Speaker-level input compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
  • Double-sided fiberglass circuit board
  • Built-in crossovers and adjustable KickEQ for dialing it in
  • DC offset or 12v remote auto turn-on modes
  • Angled custom-tooled power connectors
  • Stylish magnetic panels cover controls and glass-fiber composite end panels
  • Heavy duty high-mass aluminum alloy heat-sink
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (40-500 Hz, 24 dB/octave)
  • Variable high-pass filter (10-500 Hz with 10x multiplier, 24 dB/octave)
  • Frequency Response: 10-20,000 Hz
  • CEA-2006 compliant amplifier
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 8-5/16"W x 8"L x 2-1/8"H
  • Authorized Internet Dealer
  • 2-year Manufacturer's Warranty (extends to 3 years when purchased with a Kicker amp kit

NVX XKIT82

100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit w/ RCA Interconnect and 40 ft Speaker Cable
Quantity: 1

General Features:

  • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 600 watts RMS
  • Premium power and ground wire provides optimal power transfer
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
  • Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Strand Count: 735
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 8 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
  7. One 5/16" black rubber firewall grommet
  8. Two 8 gauge spade terminals
  9. Two black 16 gauge nickel-plated spade lugs
  10. Three blue 16 gauge nickel-plated spade lugs
  11. One black 18 gauge spade terminal
  12. Two 18 gauge red butt connector
  13. Ten 4" black zip ties

Atrend 12SME

12" Single Sealed Ultra Slim Series Subwoofer Enclosure
Quantity: 1

 
General Features:
  • 12" Single Sealed Ultra Slim Series Subwoofer Enclosure
  • High power handling
  • Designed and engineered to maximize specific subwoofers
  • High performance in tight space applications
  • Completely miter and dado end panels
  • Premium carpeted finish
  • Silver spring loaded terminal cups
  • 3/4" MDF construction
  • Glued and braced with fasteners
  • Total box volume: 0.62 cubic feet
  • Dimensions: 15"D x 24"W x 5"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Recommended For:

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Reference (Infinity)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
250 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 or 4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
27 - 175 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
7.65 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Dark Gray
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Bandpass
Ported / Vented
Sealed
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.75 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.75 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3.25"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
11.125"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
VIP Guarantee

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $94.95

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure Subwoofer

Mono Amp

2 Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

3 Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure Subwoofers

4 Channel Amp

4 Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

REF1200S_KX200.2_XKIT82_12SME

Weight

38.23lbs

Internal SKU

ref1200s_40kx2002_xkit82_12sme

Internal Product ID

109525

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

  • Harman International: The Pursuit of Great Sound
  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?