Expert Service 1-661-257-9993 [Hours]

JBL Speakers and Subwoofer + Kicker Amp Bundle

GTO938 6x9" 3-Way Coaxial Speakers + GT5-1202BR Single 12" Loaded Sub Box + KX400.4 400W KX Series 4-ch Amp + XKIT42 2-ch 4G Amp Install Kit

We apologize

This item has been discontinued

Item Added to Cart

JBL Speakers and Subwoofer + Kicker Amp Bundle

GTO938 6x9" 3-Way Coaxial Speakers + GT5-1202BR Single 12" Loaded Sub Box + KX400.4 400W KX Series 4-ch Amp + XKIT42 2-ch 4G Amp Install Kit

$429.21

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$50.99
Add Warranty
3 years of protection

NVX XKIT84 4-Channel 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

$69.99

Add
Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

$141.83

Add

Don't see the accessory you're looking for?
View all available accessories for the JBL Speakers and Subwoofer + Kicker Amp Bundle.

Get FAST answers from customers ASK a Question See questions answers

JBL Store


JBL GTO938
3-Way Grand Touring (GTO) Series

Professional JBL Sound

Professional JBL Sound:

With the long history of professional audio equipment manufactured my JBL, it is no surprise that the Grand Touring Series (GTO) produce some of the finest sound available for car speakers. By integrating the majority of JBL's top car speaker technology, these speakers are able to effectively deliver truly stunning audio, while keeping the price affordable for everyone. For those that are looking for a quality car speaker that will not only sound great, but also keep more money in your pockets. Put your trust in JBL and these Grand Touring Series speakers.



Tweeter-Level Adjustment with Unipoint

Tweeter-Level Adjustment with Unipoint:

The tweeters on the GTO series speakers are an excellent example of JBL's advanced technology. Made from My/Ti (Mylar and Titanium composite), the tweeters offer a higher power handling, greater efficiency, and reduced distortion. To direct that sound where you want, JBL has designed a Unipoint rotating tweeter pod that allows the tweeter to be directed towards the listener. This results is better imaging and a more accurate sound stage. To top of the tweeter technology, JBL engineered a tweeter-level control switch that adjusts the tweeter dB output. This allows for more sound adjustments after the speaker is installed.




The Sound of quality

Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.



JBL GTO938

600W 6x9" 3-Way Grand Touring GTO Series Coaxial Speakers w/ Titanium-Mylar Tweeters
Quantity: 1

Priced Per Pair

JBL GTO939

General Features:

  • 6" x 9" Grand Touring Series 3-way Car Speakers
  • Power Handling:
    • Peak: 600 watts per pair / 300 watts each
    • RMS: 200 watts per pair / 100 watts each
  • Recommended Power Range: 10 - 125 watts RMS per channel
  • Low-Q woofer design
  • Patented Plus One® polypropylene cone material
  • 1" High-bandwidth, edge-driven Mylar-titanium dome tweeter
    • UniPivot™ rotating tweeter, rotates nearly 360 degrees
    • 0 / +3dB level adjustment
  • On-board crossover network
  • Plus One cone material
  • Mylar/titanium composite dome tweeters
  • Frequency response: 45-21,000 Hz
  • 2 ohms impedance
  • Sensitivity: 94 dB
  • Cutout dimensions: 6" x 8-3/4"
  • Top-mount depth: 3"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

JBL GT5-1202BR

1100 Watts Peak Single 12" GT Series Bass-Reflex Subwoofer Box/Enclosure
Quantity: 1

Subwoofer Features:
  • 12" Single GT Series Subwoofer
  • Power Handling:
    • Peak: 1100 watts
    • RMS: 275 watts
  • Recommended power range: 100 - 300 watts RMS @ 2 ohms
  • Nominal Impedance: 2 ohms
  • Polypropylene cone woofer
  • Rubber surround
  • Rubber coated tinsel leads
  • Vented motor structure
  • Dual-stacked, oversized magnets
  • Sensitivity: 90 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty (subwoofer only)
Enclosure Specifications:
  • JBL Tuned Slipstream Ported Enclosure
  • Designed specifically for the JBL GT5-12 subwoofer
  • Tuned to an optimal 45-150 frequency response
  • Recommended power handling: 100-275 watts RMS
  • Wired internally for a final impedance of 2 ohms
  • Covered in black carpet for looks and durability
  • Sturdy grill protects the subwoofer from unnecessary damage
  • Gold plated terminals or excellent connectivity
  • Banana clip ready
  • Made from durable 3/4" MDF (Medium Density Fiberboard
  • Dimensions: 10-15/16"D1 x 14"D2 x 22-5/8"W x 14-9/16"H

Kicker KX400.4 (40KX400.4)

400W KX Series 4-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX4004)
Quantity: 1

Kicker Always Exceeds Rated Power

General Features:

  • KX Series 4-Channel Class D-IC Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • Bridged, 4 ohms: 200 watts x 2 chan.
  • Max power output: 800 watts x 1 chan.
  • High-efficiency regulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (Variable 0-18 dB @ 40 Hz)
  • Soft start turn-on
  • 4/3/2 and mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • Equipped with FIT (Fail-Safe Integration Technology) to accept output from virtually any source
  • FIT’s lab-grade, balanced differential inputs offer best possible noise rejection
  • Speaker-level input compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
  • Double-sided fiberglass circuit board
  • Built-in crossovers and adjustable KickEQ for dialing it in
  • DC offset or 12v remote auto turn-on modes
  • Angled custom-tooled power connectors
  • Stylish magnetic panels cover controls and glass-fiber composite end panels
  • Heavy duty high-mass aluminum alloy heat-sink
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (40-500 Hz, 24 dB/octave)
  • Variable high-pass filter (10-500 Hz with 10x multiplier, 24 dB/octave)
  • Frequency Response: 10-20,000 Hz
  • CEA-2006 compliant amplifier
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H
  • Authorized Internet Dealer
  • 2-year Manufacturer's Warranty (extends to 3 years when purchased with a Kicker amp kit)

NVX XKIT42

100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit w/RCA Interconnect & 40 ft Speaker Cable
Quantity: 1

General Features:

  • 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Premium power and ground wire provides optimal power transfer
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
  • Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Strand Count: 1862
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 4 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Black 4 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. Two 4 Gauge Nickel Plated spade terminals
  9. Four 18 Gauge Spade terminal
  10. Two 18 Gauge Red butt connectors
  11. Four 16 Gauge quick disconnect
  12. Five 16 Gauge Nickel Plated spade terminals
  13. Ten 6" Black zip ties

Front Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Mylar
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Plus One
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
100 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
94 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
45 - 21,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
6" x 8-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

60 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

85 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

170 watts x 2 channels

Amplifier Specifications

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

435 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<1%
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
2 pairs
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

32 - 320 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

32 - 320 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
93 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
20A x 2 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX XKIT84 4-Channel 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

Your Price $69.99

Belva BAK84

Complete 8 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects

Your Price $24.99

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

18 Butt Connectors, 2 Ring Terminals, and Zip Ties

Great for connecting your car stereo wires to the harness

Your Price $4.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

GTO938_GT5-1202BR_KX400.4_KX400.4

Weight

56.65lbs

Internal SKU

gto938_gt51202br_40kx4004_xkit42

Internal Product ID

109527

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL Speakers and Subwoofer + Kicker Amp Bundle

  • JBL GTO Series Car Speakers | Product Overview
  • Harman International: The Pursuit of Great Sound