General Features:
- 12" BAMF Series Subwoofer
- Power Handling:
- Peak: 3500 watts
- RMS: 1750 watts
- Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
- Stitched and Glued Surround/Cone Joints for Strongest Bonding
- 3" 4-Layer Voice Coil w/ Direct Connect Wire
- Overcompensating Motor Structure for Increased Magnetic Strength
- 12mm T-Yoke & Top Plate Improve Low Frequency Dynamics
- Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
- Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
- High-Temperature Tolerance Adhesives Resist Thermal Failure
- Extended Excursion Polyether Foam Surround w/ UV Protection
- Dual Poly-Cotton Suspension Dampen Violent Accelerations
- Stitched Voice Coil Leads Prevent Potential Damage
- 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included
- Efficiency: 81.30, 1 watt / 1 meter
- Top-mount depth: 6.00"
- Motor Volume: 204oz
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
General Features:
- BB Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 780 watts x 1 chan.
- 2 ohms: 1260 watts x 1 chan.
- 1 ohm: 1800 watts x 1 chan.
- Max power output: 3000 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- Input sensitivity:
- Low level: 100mV-6V
- Variable low-pass filter (40-180 Hz, 12 dB/octave)
- Subsonic filter (12 dB variable from 20Hz - 50 Hz)
- Frequency response: 20-30,000 Hz
- 200-240 Amp in-line fuse required, see our selection of recommended fuse holders
- Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Note: Internal fuses are not included, so an external 200-240 Amp ANL Fuse is required to safely operate this amplifier.
Belva BAK42BL (Blue)
Primary Color: Blue - Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1
General Features:
- Complete 4 Gauge 2-Channel Amplifier Installation Kit
- Premium Powerflex power and ground wire provides optimal power transfer
- Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
- Belva CCA wire is made from 30% copper while KnuKonceptz, XS Power and other CCA wire is just 10% copper
- Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
- In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
- Also available as 4-Channel Kit
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 17 ft. (5.2 meters) Blue 4 gauge power wire
- 3 ft. (.91 meters) Black 4 gauge ground wire
- 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
- 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
- 20 ft. (6.1 meters) Speaker cable
- One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
- One Black rubber firewall grommet
- One 4 Gauge Blue chrome plated ring terminals
- One 4 Gauge Black chrome plated ring terminal
- Three 18 Gauge Blue Spade terminal
- Two 18 Gauge Black Spade terminal
- One 18 Gauge Red butt connector
- Ten 4" Black zip ties