Garage
Shop

2002 - 2007 Jeep Liberty Rockford Fosgate Punch Premium Package with Amplifier & Six Speakers System

Punch P16-S 6" Component & P152 5-1/4" Coaxial Car Speakers + Punch P400X4 4-Channel Class AB Full Range Amplifier + (4) Speaker Adapter Brackets

Rockford Fosgate
Shop all Rockford Fosgate
Product videos
highlight-star-icon

• 50 Watts RMS x 4 @ 4 ohms
• Built In NOMAD "Real Time" Analog Computer
• 4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability
• 1" Polyetherimide Soft Dome Tweeter
• 2-Way Component System
• 120W Max
• 4 ohms Impedance
• Injection-Molded Polypropylene Cone
• Butyl Rubber Surround

Learn more about the p16s_09-p152_p400x4_2-sac656

We apologize

This item has been discontinued

Product Highlights


• 50 Watts RMS x 4 @ 4 ohms
• Built In NOMAD "Real Time" Analog Computer
• 4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability
• 1" Polyetherimide Soft Dome Tweeter
• 2-Way Component System
• 120W Max
• 4 ohms Impedance
• Injection-Molded Polypropylene Cone
• Butyl Rubber Surround

Description


Rockford Fosgate brand icon

Authorized dealer

The Perfect Punch

A perfect system starts off with perfect aftermarket car speakers. If you are a fanatic of a great sounding speaker, then the Rockford Fosgate Punch Series is meant for you. It is a full-range speaker with a flex-fit basket to ensure compatibility. By utilizing slots instead of single sized screw holes, allows for a slight adjustment of the speaker when mounted. This becomes useful if you are mounting the speakers in an odd shaped factory speaker location. The integrated concealed crossover hides the crossover inside the basket, decreasing and simplifying installation time. Minimizing the time between taking the speakers out of the box to installing them in your vehicle, the Punch speakers feature an OEM Adapter plate system that allows full-range speaker to fit in certain openings. The adapter plate features “break-away” tabs that can be removed to fit all speaker sizes.

The Punch series speakers feature VAST (Vertical Attach Surround Technique) which increases a speaker’s effective radiating cone area without complicating installation. The design eliminates the large flat glue surface area which allows the surround to be shifted for increased cone area. With this, nominal efficiency and maximum output capabilities are improved. The P152 is a 5-1/4” 2-Way speaker that has all the features mentioned above.

Rockford Fosgate Punch P16-S

240W Peak (120W RMS) 6" 2-Way PUNCH Series 240W Component Car Speakers System
Quantity: 1

General Features:

  • 6" P1 PUNCH Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 240 watts per pair / 120 watts each
    • RMS: 120 watts per pair / 60 watts each
  • Recommended power range: 15 - 60 watts RMS per channel
  • Injection-Molded Mineral filled Polypropylene cone material
  • 1" Polyetherimide (PEI) Soft Dome tweeters
  • Butyl Rubber speaker surround
  • CEA-2031 compliant speakers
  • 1" high-temperature voice coil
  • Multi-OEM Adapter allows shallow mount and compatibility to many vehicles
  • DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment
  • FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted
  • VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area
  • Integrated, concealed crossover filters
    • Crossover is built into mid-woofer, less parts less hassle
  • Rubber magnet boot cover
  • Grilles and mounting hardware included
  • 4 ohms impedance
  • Frequency response: 60-22,000 Hz
  • Top-mount depth: 1-15/16"
  • Sensitivity: 87dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair
Also Found As: P16S, P16 S, P 16S

Rockford Fosgate Punch P152

160W Peak (80W RMS) 5.25" Punch Series 2-way Coaxial Speakers
Quantity: 1

Product Features

  • 5-1/4" Punch Series Car Speakers
  • Power Handling:
    • Peak: 160 watts per pair / 80 watts each
    • RMS: 80 watts per pair / 40 watts each
  • Recommended power range: 15 - 50 watts RMS per channel
  • Mineral-filled and polypropylene injection molded cone
  • Butyl rubber surround
  • PEI dome tweeter
  • ICC Crossover hides the crossover for installation without hassle and a clean look
  • VAST surround provides up to 25% more surface area of the cone
  • Frequency response: 70-22,000 Hz
  • Top-mount depth: 1-4/5"
  • Sensitivity: 87dB
  • 4 ohms impedance
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

Feel the Punch!

The Punch P400X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Rockford Fosgate Punch P400X4

400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4)
Quantity: 1

General Features:

  • Rockford Fosgate Punch Series P400X4
  • Class-AB FullRange 2-Ohm 4-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • Bridged, 4 ohms: 200 watts x 2 chan.
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • LED power (blue) and protect (red) indicators
  • Stealth top mounted control panel
  • Soft start turn-on
  • 4, 3 or 2 channel operation
  • Nickel-plated RCA level inputs
  • Nickel-plated captive C-clamp terminals
  • Speaker-level (high-level) inputs with auto turn on. Rockford Fosgate RFI2SW required, sold separately.
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Features C.L.E.A.N. Set-up with in/out clip LEDs to help match a source to amp and optimize output.
  • On-board differential inputs eliminates noise picked up by the signal cable
  • Integrated Trans•ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality
  • MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
  • DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving efficiency of the circuit and lowers operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
  • Built in NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
  • Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across entire amplifier heatsink to efficiently keep the amplifier temperatures low
  • Input sensitivity: 150mV - 12V
  • Frequency Response: 20 - 20,000 Hz
  • Total Harmonic Distortion (THD): <1.0%
  • Signal to Noise Ration: 105dB
  • Selectable crossover modes: LP / AP / HP
  • Variable crossover filter: 50 - 250 Hz, 12 dB/octave
  • Variable Bass Boost, Punch EQ: 0 to +14 dB bass boost at 12.5kHz
  • Variable Bass Boost, Punch EQ: 0 to +18 dB bass boost at 45Hz
  • Fuse Rating: 60 A x 1 inline fuse recommended, not included
  • 8 - 18 gauge speaker wire connections
  • 4- 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
    • 8 Gauge is perfect for a full 4 ohm setup, while 4 Gauge is recommended for a full 2 ohm setup
  • Dimensions: 77.03"W x 7.76"L x 2.38"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Scosche SAC656

Universal 5-1/4" or 6-1/2" to 7" Speaker Adaptors
Quantity: 2 Pair (Four Total)

General Features:

  • The SAC656 adapter fits aftermarket 5 1/4" and 6 1/2" in 7" factory openings
  • Designed for most vehicles including Chrysler (Dodge/Jeep), GM, and Toyota vehicles.

Priced Per Set of Four

Specifications & Details


Front Speaker Specifications
Speaker Size
6"
Design
2-way Component System
Shallow Mount Installation
Yes
Tweeter Design
Dome
Tweeter Composition
PEI (Polyetherimide)
Woofer Composition
Injection Molded Polypropylene - IMPP
Woofer Surround
Butyl Rubber
Peak Power Handling
120 watts
RMS Power Handling
60 watts
Sensitivity
87 dB
Frequency Response
60 - 22000 Hz
Impedance (Per Voice Coil)
4 ohms
Top-Mount Depth (Mounting Depth)
1-15/16"
Cutout Dimensions
5-1/16" x 5-1/16" 
Speaker Grilles
Yes
Rear Speaker Specifications
Speaker Size (Rear)
5-1/4"
Design
2-way
Shallow Mount Installation
No
Tweeter Design
Dome
Tweeter Composition
PEI (Polyetherimide)
Woofer Composition
Polypropylene
Woofer Surround
Butyl Rubber
Peak Power Handling
80 watts
RMS Power Handling
40 watts
Sensitivity
87 dB
Frequency Response
70 - 22,000 Hz
Impedance (per voice coil)
4 ohms
Top Mount Depth
1-7/8"
Cutout Dimensions
4-7/8" x 4-7/8" 
Speaker Grilles
Yes
Amplifier Power Specifications
RMS Power @ 4 ohms
50 watts x 4 channel
RMS Power @ 2 ohms
100 watts x 4 channel
Bridged RMS Power
200 watts x 2 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
4-Channel
Total Peak Power Output
800 watts
Total RMS Power Output
400 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
1.0%
Speaker Level Inputs
Optional (Requires Accessory Adapter)
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
50 - 250 Hz
Low-Pass Crossover Frequency
50 - 250 Hz
Signal-to-Noise Ratio
105 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
60A Fuse Recommended, Not Included
CEA-2031 Compliant
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

P16-S_P152_P400X4_2-SAC656

Weight:

22.36lbs

Internal SKU:

p16s_09-p152_p400x4_2-sac656

Internal Product ID:

112039

Product and How-to Videos


Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

Boss Elite BV765BLC with Backup Camera

• Double DIN Bluetooth DVD Multimedia Receiver
• 6.5" Touchscreen Display
• 3 sets of 2 volts preamp outputs
• 7-Band Equalizer
• Wireless remote control included
• Includes Backup Camera

(1)

$179.99

Kenwood DMX4707S with 6.5" Speakers

• Double DIN Bluetooth Digital Multimedia Receiver
• 6.75" Capacitive Touchscreen Display
• Apple CarPlay and Android Auto Compatible
• 3 sets of 2 volts preamp outputs
• 13-Band Graphic Equalizer with Digital Time Alignment
• SiriusXM Satellite Radio Ready

(24)

$292.99

Alpine iLX-W670 with License Plate Backup Camera

• Double DIN Bluetooth Digital Multimedia Receiver
• 7" Capacitive Touchscreen Display Display
• Apple CarPlay and Android Auto Compatible
• 3 sets of 4 volts preamp outputs
• 13-Band Graphic Equalizer with Digital Time Correction
• SiriusXM Satellite Radio Ready

(15)

$299.95

Planet Audio P695MBRC with Backup Camera

• Double DIN Bluetooth Digital Multimedia Receiver with USB and AUX
• 6.95" Capacitive Touchscreen Display
• Smartphone compatible
• 2 sets of 4 volts preamp outputs
• Built-in Preset Equalizer

(2)

$135.99

Alpine Complete Audio Package

• 7" Double DIN Bluetooth Digital Multimedia Receiver
• 480W Peak (160W RMS) 6.5" 2-way Coaxial Speakers
• 10” Loaded Subwoofer Enclosure
• Class D 2 ohms Stable Monoblock Amplifier
• Remote Bass Knob for Alpine Amplifiers

(16)

$999.99

Related Searches


P16-S_P152_P400X4_2-SAC656 small

Item added to your cart.

Price: $495.95

Essential add-ons
NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$149.99

$109.99

Add to cart
Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$18.99

$11.99

Add to cart
18 Butt Connectors, 2 Ring Terminals, and Zip Ties

Great for connecting your car stereo wires to the harness

$9.95

$9.95

Add to cart
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon