Expert Service 1-661-257-9993 [Hours]

Wet Sounds SYN-DX 4

800W RMS DX-Series Bridgeable Full Range 4-Channel Class D Marine-Greade Amplifier (WetSounds)

10% Rewards
Free Return Shipping
Extended Warranty
Learn More

List price $799.99

You Save: $200.00 (25.00%)

Thanks , You Pay:

$599.99

with warranty

+ FREE Shipping in US 48

Order within 5 hrs 52 mins to ship today

Qualifies for free shipping

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Wet Sounds SYN-DX 4

800W RMS DX-Series Bridgeable Full Range 4-Channel Class D Marine-Greade Amplifier (WetSounds)

$599.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$65.99
Add Warranty
3 years of protection

NVX VUBT2

Universal Bluetooth Audio Receiver

$26.99

Add
Kicker Q-Series RCA Interconnect Cable

19 ft. of 4-Channel Q-Series RCA Cable with dual twisted-pair conductors, hyper-flex technology, and gold-plated k-cut collars for excellent signal transfer.

$79.95

Add
Car/Marine Audio Installation Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Wet Sounds SYN-DX 4.

Get FAST answers from customers ASK a Question See questions answers

Wet Sounds Store

General Features:

  • Wet Sounds DX Series SYN-DX 4
  • Class-D FullRange 2-Ohm Stable 4-Channel Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 125 watts x 4 chan.
    • 2 ohms: 200 watts x 4 chan.
    • Bridged, 4 ohms: 400 watts x 2 chan.
  • Total power output: 800 watts
  • LED power (blue) and protect (red) indicators
  • 4/3/2 channel operation
  • Stainless Steel Hardware
  • Conformal Coated PCB
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Input sensitivity: 0.2V-0.6V
  • Frequency Response: 20 - 20000 Hz
  • Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
  • Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
  • Fuse Rating: 30 A x 2
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the SYN-DX 4 Owner's Manual

Product History:

Wet Sounds SYN-DX 4 thumbnail
(newest, current model)
Wet Sounds SYN 4 thumbnail
(previous model, replaced by Wet Sounds SYN-DX 4)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

125 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

400 watts x 2 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
DX Series
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

800 watts
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 2 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $26.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $74.99

NVX XUBT4

Universal Bluetooth Audio Receiver

Your Price $74.99

Kicker Q-Series RCA Interconnect Cable

19 ft. of 4-Channel Q-Series RCA Cable with dual twisted-pair conductors, hyper-flex technology, and gold-plated k-cut collars for excellent signal transfer.

Your Price $79.95

NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

Your Price $11.99

StreetWires ZN9 Series Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with Rhodium-plated contacts and ZeroNoise construction for clear signal transfer!

Your Price $74.77

Car/Marine Audio Installation Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
wet sounds is the best!!!!
robert g on Aug 8, 2016

Product Summary

Manufacturer

Model Number

SYN-DX 4

UPC

814820022537

Weight

7.00lbs

Internal SKU

syndx4

Internal Product ID

112071

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Wet Sounds SYN-DX 4