Expert Service 1-661-257-9993 [Hours]

NVX Complete Audio Package for GM Crew Cab Trucks

List price $1825.85: 1700 Watt RMS 8 Speaker Complete Audio Package for 2014-UP Chevy Silverado and GMC Sierra Crew Cab Trucks

Out of Stock - Backorder
|

List price $1825.85

You Save: $649.80 (35.59%)

Thanks , You Pay:

$1,176.05

with warranty

+ FREE Shipping in US 48

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

Item Added to Cart

NVX Complete Audio Package for GM Crew Cab Trucks

List price $1825.85: 1700 Watt RMS 8 Speaker Complete Audio Package for 2014-UP Chevy Silverado and GMC Sierra Crew Cab Trucks

$1,176.05

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$112.99
Add Warranty
3 years of protection

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

$92.52

Add

Don't see the accessory you're looking for?
View all available accessories for the NVX Complete Audio Package for GM Crew Cab Trucks.

Get FAST answers from customers ASK a Question See questions answers

NVX Store

Upgrade Your Whole System!

The NVX Complete Audio Package for GM Crew Cab Trucks offers an all-in-one option to upgrading your truck's sound system. Why order pieces one at a time when you can get them all at once, and better yet, this package was put together by our experts to ensure you get the best sound for your ride at an outstanding price! Included in the package are a total of 6 V-Series speakers, a pair of 6.5" 2-way component speakers (with tweeters) capable of up to 280 watts of power handling as well as a pair of 6.5" coaxial speakers that can put out up to 200 watts. To cover your bass needs, this package includes a pair of 12" 600 watt VSW Version 2 subwoofers. Tying all of your sound together is a pair of NVX JAD Series Amplifiers, both class D to efficiently power each speaker and subwoofer. With a List Price of $1825.85, this kit saves you over $600! Upgrading your vehicle's sound system should be a no brainer with the NVX Complete Audio Upgrade Kit! For those Do-It-Yourselfers, make sure to pick up the proper speaker brackets, found in the "Related Items" Tab.

Here's What You Get:

  1. NVX VSP65KIT 6.5" 2-Way V-Series Component Car Audio Speakers System
  2. NVX VSP65 6.5" V-Series Coaxial Speakers Car Audio Speakers
  3. NVX VSW124v2 12" VS-Series Dual 4-ohm Car Subwoofer (x2)
  4. Bbox A184-12CP Enclosure for 2014-Up Chevy Silverado and GMC Sierra Crew Cab Trucks
  5. NVX JAD800.4 Full Range Class D 4-Channel Amplifier
  6. NVX JAD1200.1 Class D Monoblock Amplifier with Bass Remote
  7. NVX 100% Copper Dual Amplifier Wiring Kit + Speaker Wire & RCA Cables



NVX VSP65KIT

6.5" 2-Way V-Series Component Car Audio Speaker System
Quantity: 1

General Features:

  • 6-1/2" V-Series 2-way Component Speakers System
  • Power Handling:
    • Peak: 280 watts per set / 140 watts each side
    • RMS: 140 watts per set / 70 watts each side
  • Recommended power range: 10 - 125 watts RMS per channel
  • Component Woofer Features:
    • Polypropylene component woofer cone
    • Nitrile Butadiene Rubber speaker surround
    • TSV High temperature voice coil
    • Ferrite Y30 Motor Structure
    • Frequency Response: 70-20,000 Hz
    • Sensitivity: 88.5dB
    • Top-mount Depth: 2-1/2"
  • Tweeter Features:
    • 25mm Silk dome tweeter
    • High-Temperature ASV Aluminum Voice Coil w/ CCA Wiring
    • Neodymium magnet motor structure
    • Injection Molded Chamber
    • Frequency Response: 2,000-20,000 Hz
    • Sensitivity: 90dB
    • Top-mount Depth: 1"
  • 4 ohms impedance
  • Selectable crossover switch: 0dB, -3dB
  • Optional Grills Also Available: NVX XGR665
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX VSP65

100W 6.5" V-Series Coaxial Speakers with 25mm Silk Dome Tweeters
Quantity: 1

General Features:

  • 6-1/2" V-Series Coaxial Car Speakers
  • Power Handling:
    • Peak: 200 watts per pair / 100 watts each
    • RMS: 100 watts per pair / 50 watts each
  • Recommended power range: 5 - 125 watts RMS per channel
  • Lightweight polypropylene cone provides accurate mid and low notes
  • Nitrile Butadiene rubber surround supports linear movement for optimal accuracy
  • 25mm Silk dome tweeter delivers rich, warm treble with remarkable clarity and definition
  • Stamped steel basket for a sturdy foundation
  • Y30 Ferrite motor structure maintains exceptional control over the driver for tight, crisp reproduction
  • High temperature TSV voice coil provides superior current distribution while effectively dissipating heat
  • Optional Grills Also Available: NVX XGR665
  • 4 Ohms impedance
  • Frequency Response: 70-20,000 Hz
  • Top-mount Depth: 2.50" (64mm)
  • Cutout Diameter: ~5.625" (142mm)
  • Sensitivity: 89dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX VSW124v2 (VSW124 v2)

600W RMS 12" VS-Series Dual 4-ohm Car Subwoofer (VSW 124 v2)
Quantity: 2

General Features:

  • 12" VS-Series Version 2 Dual 4-ohm Car Subwoofer
  • Power Handling:
    • RMS: 1200 watts per pair / 600 watts each
  • Aluminum Shorting Ring to prevent rises in inductance
  • Non Pressed Paper cone
  • High Roll Custom Blended Foam surround
  • Stamped Steel basket
  • Single Nomex Spider
  • 100oz Y30 High Energy Ferrite Magnet
  • Impedance: Dual 4 Ohms
  • Mounting depth: 5.95" (151 mm)
  • Cutout diameter: 11.12" (282.50 mm)
  • Mounting Diameter: 11.63" (295.50 mm)
  • Overall Diamter: 12.44" (316 mm)
  • Frequency Response: 20 - 200 Hz
  • Sensitivity: 90 dB (1W/M)
  • Xmax: 12mm
  • Sd: 49.08 cm²
  • Resonance Frequency (Fs): 25 Hz
  • Net Weight: 15.58 lbs (7.05 kg)
  • Recommended Ported Enclosure: 1.75ft³
  • Recommended Sealed Enclosure: 1.25ft³
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Bbox by Atrend A184-12CP

Dual 12" Subwoofer Enclosure for 2014-Up Chevy Silverado and GMC Sierra Crew Cab Trucks
Quantity: 1

General Features:

  • Dual 12" Subwoofer Enclosure
  • Designed specifically for 14-Up Chevy Silverado and GMC Sierra Crew Cab Trucks
  • Premium carpeted finish
  • 3/4" Mounting Baffle
  • Hardwood MDF construction
  • Rounded edges
  • Glued and Braced construction
  • Subwoofer mounting depth: 6.5"
  • Box volume: 0.75 cubic feet (per chamber)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX JAD800.4

True 800W RMS, Full Range Class D 4-Channel Amplifier (JAD-800.4)
Quantity: 1

General Features:

  • Class D 4-Channel Amplifier
  • CEA-2006 Compliant
  • RMS Power Rating:
    • 4 ohms: 125 watts x 4 chan.
    • 2 ohms: 200 watts x 4 chan.
    • Bridged, 4 ohms: 400 x 2 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 175 watts x 4 chan.
    • 2 ohms: 297 watts x 4 chan.
  • Non-regulated efficient S.M.P.S power supply design
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • High speed rectifying diodes
  • Soft start turn-on
  • 4, 3, or 2 channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 20 - 20,000 Hz
  • Total Harmonic Distortion (THD): <1.00%
  • Signal to Noise Ration: 106dB
  • Selectable crossover modes: BPF / FULL / LPF
  • x1 & x10 Frequency multiplier, Front & Rear
  • Variable high-pass filter: 20 - 400 Hz or 200 - 4,000 Hz, 24 dB/octave
  • Variable low-pass filter: 50 - 500 Hz or 500 - 5,000, 24 dB/octave
  • Fuse Rating: 25A x 3
  • Gauge adapter included, allowing amplifier to accept 8, 4, 2, and 1/0
  • Dimensions: 6-7/10"W x 10-4/10"L x 1-8/10"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

NVX JAD1200.1

True 1200W RMS, Class D Monoblock Amplifier with Bass Remote
Quantity: 1

General Features:

  • Class D Monoblock Amplifier with Bass Remote
  • CEA-2006 Compliant
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 662 watts x 1 chan.
    • 2 ohms: 1037 watts x 1 chan.
    • 1 ohm: 1384 watts x 1 chan.
  • Non-regulated efficient S.M.P.S power supply design
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Power and ground Gauge adapter included (Up to 0 gauge)
  • Soft start turn-on
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable subsonic filter: 20 - 38 Hz, 24 dB/octave
  • Variable low-pass filter: 40 - 320 Hz, 24 dB/octave
  • Signal to Noise Ratio: 111 dB
  • Total Harmonic Distortion: <1.0%
  • Damping factor: 200
  • Input Sensitivity: 200mV-6V
  • Frequency response: 20 - 200 Hz
  • Fuse Rating: 40A x 3
  • Accepts 8, 4, 2, and 1/0 Gauge wire with gauge adapter
  • Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty**

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

NVX XAPK1D

True 1/0 Gauge, 100% Copper Dual Amplifier Wiring Kit (Includes Everything For Power Connections)
Quantity: 1

Amplifier Kit Features:

  • 1/0 Gauge Dual Amplifier Installation Wiring Kit for 1 or 2 amplifiers
  • Designed specifically for car audio systems over 1000 watts
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Brass and satin chrome ANL/Mini-ANL fuse holder offers ideal protection for high powered systems
  • Two brass and satin chrome distribution blocks
  • Strand Count: 4704
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 1/0 gauge main power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 1/0 gauge main ground wire with seamless crimp ring terminal
  3. 5 ft. (1.52 meters) Frosted Blue 4 gauge secondary power wire
  4. 5 ft. (1.52 meters) Frosted Gray 4 gauge secondary ground wire
  5. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  6. One NVX XMANL04 ANL/Mini-ANL fuse holder with 300 amp ANL fuse
  7. Two NVX XDBU4 with 1/0 gauge input, four 4/8 gauge outputs distribution blocks
  8. One 3/4" black firewall grommet
  9. Two black 4 gauge nickel-plated spade terminals
  10. Two blue 4 gauge nickel-plated spade terminals
  11. One black 18 gauge spade terminal
  12. One 18 gauge red butt connector
  13. Ten 6" black zip ties

NVX XIV65

V-Series: 5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable
Quantity: 1

Product Features:

  • X-Series Twisted RCA
  • 6-Channel Interconnect Cable
  • Frost blue jacket
  • Dual injection nickel-plated split RCA ends
  • Dual Twisted Pair Hyper-Flex technology for better signal transfer
  • Tactile grip RCA ends
  • Color-coded strain relief identifies left and right channels
  • Length: 5m (16.40 ft)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX XWS1650

50 ft. of True Spec 16 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
Quantity: 1

Product Features:

  • 50 ft. of True 16 Gauge EnvyFlex Speaker Cable/Wire
  • Twisted-pair technology eliminates noise for crystal clear sound
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Flexible cable and wire for easy installation
  • Jacket can be cut and the wire split
  • Durable jacket protects against damage
  • Full spec cable is true to gauge
  • BC-5W2 compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

NVX XWS1225

25 ft. of True Spec 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
Quantity: 1

Product Features:

  • 12 Gauge EnvyFlex Speaker Cable/Wire
  • 12-Gauge Power/Ground Wire Cable
  • 25 ft. of pre-cut cable for medium-sized projects
  • Metallic powder blue jacket insulates and protects against damage from extreme conditions
  • Flexible multi-strand cable bends and twists to meet your installation needs
  • Ideal for systems less than 100-200 watts
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • True to gauge for reliable power handling and secure fit
  • Transfers audio signal with clarity and minimal distortion
  • BC-5W2 compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Back to Top

Amplifier Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

125 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

400 watts x 2 channels

Amplifier Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
800 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1200 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

2000 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
1/0 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<1.00%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Full (AP)
Subsonic
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

20 - 4,000 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 5,000 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 - 38 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
111 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 3 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2" (also mounts in 6-3/4" w/ included brackets)
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Hybrid carbon and fiberglass woven cone
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 200 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.95"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Optional (Accessory Required and Sold Separately)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
VS-Series (NVX)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 200 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
12 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Hybrid carbon and fiberglass woven cone
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Double Stacked

Recommended Enclosure Specifications

Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
11.12"
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.95"
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
25 Hz

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Items we think you might want
82-3005 main
Metra 82-3005

• Speaker Adapter
• Made Specifically For 6"-6 3/4" Speakers
• Designed for Select 2014 and Up Chevrolet and GMC Trucks
• Color: Black

Your Price $11.99

SAGMHR634B main
Scosche SAGMHR634B

• 6-1/2" or 6-3/4" Door Speaker Adapter
• For Select GM Vehicles
• Includes All Necessary Hardware
• Constructed of ABS Plastic

Your Price $10.99

SAGMSV656 main
Scosche SAGMSV656

• Accommodates 6.5" and 5.25" Aftermarket Speakers
• Made From OEM Style Auto Grade ABS Plastic
• Includes (8) Screws For Mounting 5.25" Spacers
• For Front Doors Of 2014 Silverado or Sierra
• Color: Black

Your Price $19.99

LC6i-Black main
AudioControl LC6i (Black)

• Six Speaker Level Inputs – Can Accept 400 Watt Signals!
• GTO™ Signal-Sensing Input
• Internal Channel Summing
• Line Output Converter

Your Price $109.99

XEQ7 main
NVX XEQ7

• Dual Auxiliary Inputs
• Master & Subwoofer Volume Control
• Gold-Plated Contacts
• Blue Illumination
• 7V Preamp Outputs

Your Price $44.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

SLV-APKG-14UP

Weight

124.92lbs

Internal SKU

slvapkg14up

Internal Product ID

115913

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX Complete Audio Package for GM Crew Cab Trucks

  • NVX JAD1200.1 Car Amplifier (1200W Class D Monoblock Amp)
  • NVX VS-Series v2 Car Audio Subwoofers
  • NVX V-Series Car Speakers
  • NVX OFC (Oxygen-Free Copper) Amplifier Installation Kits
  • NVX JAD800.4 Car Amplifier (800W Class D 4-Channel Amp)
  • How To Install an Amplifier: Car Amplifier Basics Part 2