Expert Service 1-661-257-9993 [Hours]

Sonic Electronix Professional Car Audio System

We apologize

This item has been discontinued

Item Added to Cart

Sonic Electronix Professional Car Audio System

$899.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$101.99
Add Warranty
3 years of protection

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

$92.52

Add

Don't see the accessory you're looking for?
View all available accessories for the Sonic Electronix Professional Car Audio System.

Get FAST answers from customers ASK a Question See questions answers

Car Audio Packages

Play Like The Pros!

This Car Audio Package is put together exactly how the pros would do it. Starting with a stereo that is purpose-engineered to provide top-notch sound quality and ending with a full-range set of speakers that transparently sing the best of your music catalog. The Sony MEX-GS810BH Bluetooth Car Stereo takes the lead, with its 5-volt preamp outputs - a sound system is only as good as its source, and this source unit will provide the sound clarity one should expect from a professional build. That high quality signal will then make its way through the AudioControl LC-4.800 high power amplifier, that features AudioControl's MILC technology designed specifically to help YOU dial in the level to near perfection. That near-perfect audio signal finally makes its way out of a pair JBLs 6.5" 2-Way GTO Series Component and an NVX VSW102v2 10" VS-Series Dual 2-ohm Subwoofer, providing a full-range one-two-punch matched by few. Tying up the entire system together is a 100% Copper, 4-Channel True Spec 8 Gauge Amplifier Installation Kit. As an added bonus, this package includes the SIRIUS XM Connect Vehicle Tuner, that integrates seamlessly with the Sony Stereo.

Take the guess work out of piecing together an entire project and get straight to enjoying a proper setup.

Here's What You Get:

  1. Sony MEX-GS810BH Single-DIN Bluetooth Car Stereo w/ HD Radio Tuner
  2. SiriusXM SXV300v1 SIRIUS XM Connect Vehicle Tuner for Adding Satellite Radio
  3. JBL GTO609C 6.5" 2-Way GTO Series Component Car Audio Speaker System
  4. NVX VSW102v2 10" VS-Series Dual 2-ohm Car Subwoofer
  5. AudioControl LC-4.800 High-Power 4/3/2 Channel Amplifier
  6. NVX XKIT84 100% Copper, 4-Channel True Spec 8 Gauge Amplifier Installation Kit



Sony MEX-GS810BH

Single-DIN Bluetooth Car Stereo w/ HD Radio Tuner with 3-year warranty!!!
Quantity: 1


 

 

General Features:

  • Sony MEX-GS810BH In-Dash Receiver
  • CEA-2006 compliant amplifier
  • Power Output:
    • Peak: 55 watts x 4 channels
    • RMS: 17 watts x 4 channels
  • Variable color illumination
    • Choose from over 35,000 colors to complement your existing vehicle interior lighting
  • Text display shows:
    • Source information
    • Artist
    • Track data
    • Playback time
    • Menu and time
    • Pandora data
    • Bluetooth information
  • Detachable face plate
  • Face plate mount tilts from 0-45°
  • Remote control included
  • Authorized Internet Dealer
  • 3 Year Manufacturer's Warranty

Playback and Audio Features:

  • Playback of CD, CD-R, CD-RW, MP3 and WMA
  • AM/FM tuner with 18FM/12AM presets
  • iPod and iPhone Ready: Standard USB-to-iPod Cable compatible
  • 10-band parametric equalizer
    • Selectable slope slope high and low pass filter crossovers
    • Listener Position calibration (time alignment)
      • Fine tune your system to feel like you're sitting in the middle of the sound stage
    • Digital Sound Enhancement Engine
      • Improve digital music playback
  • 3.5mm Front Auxiliary Input
  • Quick-BrowZer with Jump Mode search features
    • Intuitive music search functions
    • Use Quick-BrowZer to find music by artist, album, genre, song or playlist
    • Jump Mode allows you to fast forward through a category in 10% increments to find a specific song
  • HD radio with iTunes tagging
    • Plays compatible AM/FM signals with enhanced sount quality and station info
    • iTunes Music Tagging allows you to find your favorite songs later
  • Pandora Internet radio control
    • Receiver provides complete access to Pandora through iPhone, Android or Blackberry smartphones
  • Passenger control for iPhone/iPod
  • Voice activation for paired iPhones
  • Front and Rear USB Input
  • CD text information display
  • MP3 ID3 Tag Display (Title/Artist/Album)

Expandability Options:

  • 3 Sets of 5V preamp outputs (front, rear and subwoofer)
  • SiriusXM Satellite Radio Ready: SiriusXM Radio Package and subscription required and sold separately
  • Bluetooth enabled
  • Steering Wheel Control Ready: Axxess ASWC required and sold separately

Bluetooth Features:

  • Built-in Bluetooth technology for hands-free talking and audio streaming
  • One touch listening with NFC
    • Align compatible devices and touch NFC logos to pair
  • Supports A2DP audio streaming
  • Works with most Bluetooth enabled cell phones
  • Store up to 6 numbers in speed dial
  • View call history (up to 20 calls)
  • Includes a external wired microphone for clear, convenient talking

Note of caution from Sony: Bluetooth Microphone Connection Procedure
To ensure proper functionality of Sony head units the Bluetooth microphone must be connected to the correct port at the rear of the head unit labeled “MIC”, which is red .

SiriusXM SXV300v1 + $70 Visa Card & 3 Months Free Service*

V300 SIRIUS XM Connect Vehicle Tuner for Adding Satellite Radio to Any SiriusXM-Ready Car Stereo
Quantity: 1

Product Features:

  • SiriusXM Connect Next Gen Vehicle Tuner for adding SiriusXM Satellite Radio to any SiriusXM-ready car stereo
  • Able to connect to and control SiriusXM through vehicles car audio system
  • No need for any translators or cable adapters
  • Compact size allows for discrete behind the dash mounting for a complete integrated look
  • Able to pause, rewind and replay up to 30 minutes of live XM Satellite Radio
  • Alert notification when your favorite song, artist, or team is playing
  • iTunes tagging capable for tagging and future purchasing of music via iTunes
  • Easy and quick installation
  • Use TuneMix™ to hear a mix of songs from your favorite channel¹
  • Use TuneScan™ to preview songs that you have not yet heard on your favorite channels¹
  • Keep up with the big plays for your favorite teams with SportsFlash™¹
  • Keep Moving with the most current updates using Traffic & Weather Now™¹
  • Dimensions: 3-1/2"W x 3/4"D x 2"H
  • Found as: V300v1, V300, Replacement for V200 Tuner, SXV300
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
What's In the Box
  • SiriusXM Connect Vehicle Tuner
  • Magnetic Mount Antenna
  • Installation Guide

SiriusXM SXV300v1

The SXV300v1 SiriusXM Connect 2.0 Vehicle Tuner works with in-dash receivers that have a "SiriusXM ready" logo. this adapter is not compatible with receivers that have "SAT Radio Ready", "Sirius Ready DC", or "XM Ready" logos.

Click Here for Our Stereo Compatibility Chart!

Note:
Consult car stereo receiver manufacturer for detailed description of features, operations and capabilities.

A subscription to XM is also required. Satellite radio service is available only within Canada and the lower 48 states — not available in Hawaii or U.S. territories.


*$70 Visa Card ships from SiriusXM and requires a new satellite radio subscription to be activated.
Click HERE for details

JBL GTO609C

6.5" 2-Way GTO Series Component Car Audio Speaker System
Quantity: 1


JBL GTO939

 

General Features

  • 6-1/2" GTO Series 2-Way Component System
  • Power Handling:
    • Peak: 540 watts per pair / 270 watts each
    • RMS: 180 watts per pair / 90 watts each
    • Recommended Power: 5 - 200 watts RMS each
  • Carbon-injected cone material
  • Patented Plus One woofer-cone technology increased output with no extra power
  • Three-ohm voice coils allow compensation for added resistance by thin factory speaker wiring
  • Butyl Rubber speaker surround
  • Edge-driven, Fabric Soft Dome tweeter
  • Adjustable 0 or +3dB tweeter level attenuation
  • High-temperature voice coil
  • Vented magnet motor structure cools the voice coil
  • Fiberglass-reinforced Plastic (FRP) basket
  • External 12dB/octave crossover filters remove harmful frequencies
  • Enclosed magnet boot cover
  • Protective speaker grilles are included
  • 3 ohms impedance
  • Frequency response: 67-21,000 Hz
  • Top-mount depth: 2-1/16"
  • Sensitivity: 92dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

NVX VSW102v2 (VSW102 v2)

500W RMS 10" VS-Series Dual 2-ohm Car Subwoofer (VSW 102 v2)
Quantity: 1

General Features:

  • 10" VS-Series Version 2 Dual 2-ohm Car Subwoofer
  • Power Handling:
    • RMS: 350 - 500 watts
  • Aluminum Shorting Ring to prevent rises in inductance
  • Non Pressed Paper cone
  • High Roll Custom Blended Foam surround
  • Stamped Steel basket
  • Single Nomex Spider
  • 60oz Y30 High Energy Ferrite Magnet
  • Impedance: Dual 2 Ohms
  • Mounting depth: 5.00" (127 mm)
  • Cutout diameter: 9.15" (236 mm)
  • Mounting Diameter: 9.65" (245 mm)
  • Overall Diameter: 10.35" (263 mm)
  • Frequency Response: 20 - 200 Hz
  • Sensitivity: 87 dB (1W/M)
  • Xmax: 11mm
  • Sd: 33.00 cm²
  • Resonance Frequency (Fs): 30 Hz
  • Net Weight: 13.15 lbs (5.95 kg)
  • Recommended Ported Enclosure: 1.00ft³
  • Recommended Sealed Enclosure: 0.70ft³
  • Subwoofer grille sold separately - NV10GR
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually


Additional Information:

Why a 10" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.



Check out the NVX VS-Series User Manual

Tips for Installing the your NVX VSW102v2 subwoofer


AudioControl LC-4.800

High-Power 4/3/2 Channel Amplifier with AccuBass
Quantity: 1

General Features:

  • RMS Power Rating:
    • 4 Ohm: 125 watts x 4 chan.
    • 2 Ohm: 200 watts x 4 chan.
    • Bridged: 400 watts x 2 chan.
  • 4/3/2 channel operation
  • Optional ACR-1 Assignable Remote Level & Preset Control
  • Line-level and Speaker-level (high-level) inputs
  • 4 balanced preamp inputs
  • Signal summing
  • Summable active speaker-level inputs (6 channels) for OEM integration
  • Line level outputs to daisy chain multiple amplifiers
  • 2 assignable preamp outputs
  • Maximum Preamp Output: 8.5 V RMS
  • AccuBASS® Processing
  • MILC™ Source Clip Detection - Maximized Input Level Control:
    • assures the input signal avoids clipping and distortion
  • Input Voltage Range: 250mV - 8V RMS
  • GTO™ Signal Sense
  • Premium OEM Integration
  • Solid One-Piece Aluminum Chassis
  • Adjustable Linkwitz-Riley Alignment crossovers: 30 - 300 Hz
  • PFM Subsonic Filter: 32Hz
  • Fuse Rating: 40A x 2
  • Signal-to-Noise Ratio: 102dBa
  • Total Harmonic Distortion: <0.1%
  • Frequency Response: 10 Hz - 30 kHz
  • 4 - 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Dimensions: 9"W x 7.95"D x 2.1"H
  • Authorized Internet Dealer
  • 5 Year Manufacturer's Warranty

What's in the Box

  • LC-4.800
  • Speaker connectors
  • Fuses
  • Manual
  • Warranty


Check out the LC-4.800 Quick Start Guide



Check out the LC-4.800 Helpful Common Uses Guidelines from AudioControl

NVX XKIT84

100% Copper, 4-Channel True Spec 8 Gauge Amplifier Installation Kit w/ RCA Interconnect and 65 ft Speaker Cable
Quantity: 1

General Features:

  • 8 Gauge 4-Channel X-Series Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 600 watts RMS
  • Premium power and ground wire provides optimal power transfer
  • Made from 100% oxygen-free silver-tinned copper for a pure uninterrupted transfer of power and signal
  • 4-Channel Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
  • Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Strand Count: 735
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 8 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 65 ft. (19.8 meters) Frosted Gray/Blue 16 gauge speaker wire -- includes a 40 ft. pack and a separate 25 ft. pack
  5. One 16 ft. (5 meters) 4-channel twisted construction RCA interconnect Cable (NVX XIV45)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
  7. One 5/16" black rubber firewall grommet
  8. Two 8 gauge spade terminals
  9. Two black 16 gauge nickel-plated spade lugs
  10. Three blue 16 gauge nickel-plated spade lugs
  11. One black 18 gauge spade terminal
  12. Two 18 gauge red butt connector
  13. Ten 4" black zip ties

Amplifier Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

125 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

400 watts x 2 channels

Amplifier Specifications

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

800 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
3 AWG
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 300 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 300 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
32 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
102 dB
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 2 

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Cloth
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Carbon Composite
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
270 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
90 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
67 - 21000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
3 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/16"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-1/4"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5" x 5" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
VS-Series (NVX)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
270 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
90 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
3 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
67 - 21000 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
11 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Carbon Composite
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Double Stacked

Recommended Enclosure Specifications

Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9.15"
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/16"
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
30 Hz

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

SXV300v1_MEX-GS810BH_GTO609C_VSW102v2_LC-4.800

Weight

37.69lbs

Internal SKU

sxv300v1_mexgs810bh_gto609c_vsw102v2_lc4800

Internal Product ID

116413

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Sonic Electronix Professional Car Audio System