Expert Service 1-661-257-9993 [Hours]

Sonic Electronix Semi-Professional Car Audio System

We apologize

This item has been discontinued

Item Added to Cart

Sonic Electronix Semi-Professional Car Audio System

$651.96

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$77.99
Add Warranty
3 years of protection

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

$92.52

Add

Don't see the accessory you're looking for?
View all available accessories for the Sonic Electronix Semi-Professional Car Audio System.

Get FAST answers from customers ASK a Question See questions answers

Car Audio Packages

Be Heard!

Everyone has to start somewhere, be it JV, Tripe-A or D-League. This Car Audio Package is designed specifically for the enthusiast who wants to make noise now, but still have room to eventually play with the big boys. There is no better foundation for such a setup than that provided by the Sony MEX-XB100BT Bluetooth Stereo that features a Built-In 160W Amplifier. That power is channeled directly to a pair of Polk Audio 6-1/2" 2-way Component Car Speakers. Complimenting that full-range sound with Bass is a Kicker CompR 12" Dual 4-ohm Subwoofer powered properly by a JBL MS-A5001 Monoblock Class D Amplifier. Tying up the entire system together is a 100% Copper, 4-Channel True Spec 8 Gauge Amplifier Installation Kit. As an added bonus, this package includes the SIRIUS XM Connect Vehicle Tuner, that integrates seamlessly with the Sony Stereo.

Take the guess work out of piecing together an entire project and get straight to enjoying a proper setup.

Here's What You Get:

  1. Sony MEX-XB100BT Single DIN Hi-Power Bluetooth In-Dash CD/AM/FM/SiriusXM Ready Car Stereo
  2. SiriusXM SXV300v1 SIRIUS XM Connect Vehicle Tuner for Adding Satellite Radio
  3. Polk Audio DXi6501 6-1/2" 2-way Component Car Speakers
  4. Kicker CompR CWR124 (40CWR124) 12" CompR Series Dual 4-ohm Subwoofer
  5. JBL MS-A5001 Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
  6. NVX XKIT84 100% Copper, 4-Channel True Spec 8 Gauge Amplifier Installation Kit



Sony MEX-XB100BT Stereo w/ Built-In 160W Amplifier!

Single DIN Hi-Power Bluetooth In-Dash CD/AM/FM/SiriusXM Ready Car Stereo with 160W RMS (CEA Rated Power) built-in 4-channel Amplifier!
Quantity: 1


 

 

 

 

 

 

 

 

 

General Features:

  • Sony MEX-XB100BT In-Dash Receiver with built-in 4-channel Amplifier
  • CEA-2006 compliant Class-D amplifier
  • Power Output:
    • Peak 4 ohms: 100 watts x 4 channels
    • RMS (CEA) 4 ohms: 40 watts x 4 channels
  • With this unique stereo by Sony, you can power your front and rear door speakers using the built-in amp!
  • Subwoofer Direct Connect - with this feature you ONE rear channel to generate 60 watts RMS to power a subwoofer!
    • Be sure to connect a 4- 8 ohm subwoofer to either of the rear speaker leads. Do not connect a speaker to the other rear speaker lead.
  • One-touch Bluetooth phone pairing for audio streaming using new NFC technology!
    • Use NFC to pair your phone or other device simply by touching the device to the stereo (android)
    • Stream audio with ease and precision clarity
  • USB Bluetooth Pairing for iPhone (iOS 5.0+)
  • Detachable face plate
  • Variable color illumination
    • Dynamic 2 zone color illuminator
    • Sound and color synchronization
  • SongPal and Siri Control
  • USB provides 1.5 Amps of charging power
  • Wiring harness includes a compact power module
    • Delivers twice the amount of power that conventional receiver amps can
    • Compact design allows it to tuck in the dash behind the receiver
    • Sony recommends a direct to battery constant power connection for optimal performance
    • 10 - 16 Gauge OFC Power/Ground Wiring Recommended
  • Signal-to-Noise Ratio: 120 dB
  • Frequency Response: 10 - 20,000 Hz
  • Wow and Flutter : Below measurable limit
  • Remote control included
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Playback and Audio Features:

  • AAV (Advanced Auto Mode) adjusts the level of all playback sources to the optimum level
  • 3 Sets of 5V preamp outputs (front, rear and subwoofer)
  • Preout Impedance : 220 ohms
  • CD/CD-R/RW, MP3/WMA/AAC/FLAC
  • RDS AM/FM tuner with 18FM/12AM presets
  • iPod and iPhone Ready: Standard USB-to-iPod Cable and USB-to-Lightning Cable compatible
  • Music playback for Android devices
  • Works with Pandora
  • SongPal App system control
    • Allows you to use your smartphone or tablet as a system remote
    • Adjusts system sound and display settings, select available music sources and hear SMS, Twitter, Facebook and Calendar notifications
    • Reply to text messages with your voice via supported voice recognition
  • Quick-BroZer search function provides quick and easy music access
    • Search by artist, album, genre, song or playlist to quickly find the song you're looking for
    • Jump Mode allows you to skim through a category in 10% increments
  • DSEE and ClearAudio+™ provide outstanding sound quality
    • Digital Sound Enhancement Engine (DSEE):
      • Revitalizes and extends the audio frequencies typically lost during the compression process of audio files
      • Ensures natural sound quality
    • ClearAudio+™ renders incredibly vibrant sound with enhanced bass and crystal clear highs
      • Not available when using EQ10 or Mega Bass functions
  • 10-band equalizer EQ with +/- 6 dB adjustmen
    • 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 2000 Hz, 4 kHz, 8 kHz and 16 kHz
  • Intelligent Mega Bass functionality
  • Digital Signal Processing features:
    • ClearAudio+
    • Time Alignment
    • DSEE
    • AAV
    • Digital High and Low Pass Filters
    • RBE
  • Front USB Input w/ Sliding Door Cover
  • 24-bit Digital to Analog Converter
  • Subwoofer direct connection
  • 3.5mm Front Audio Auxiliary Input
  • CD text information display
  • MP3 ID3 Tag Display (Title/Artist/Album)

Bluetooth Features:

  • Built-in Bluetooth technology for hands-free talking and audio streaming
  • Supports A2DP audio streaming
  • Works with most Bluetooth enabled cell phones
  • Includes a external wired microphone for clear, convenient talking
  • NFC pairing for Android & USB Pairing for iPhone

Expandability Options:

Recommended Configurations, Sony MEX-XB100BT+

  • Four Speakers Setup

    • Two Pair (4) of Sony XS-FB1630 6-1/2" 3-Way FB Series Coaxial Car Speakers
    • Two Pair (4) of Sony XS-FB1330 5-1/4" 3-Way FB Series Coaxial Car Speakers
    • Two Pair (4) of Sony XS-FB6930 6"x9" 3-Way FB Series Coaxial Car Speakers
    • Any Two + Two Combination From Above Selection
  • Two Speakers + Subwoofer Setup

  • Full Range Amplified Setup

What's in the Box?

Sony MEX-XB100BT What's in the Box?
  1. Sony MEX-XB100BT Receiver
  2. Wireless Remote
  3. External Microphone
  4. Wiring Harness
  5. Power Module
  6. Brackets
  7. User Guide

MEX-XB100BT Resources:

Check out the Sony MEX-XB100BT Owner's Manual


Bluetooth Microphone Connection Procedure, ensure you have your microphone connected properly


AAV (Advanced Auto Volume), getting lower volume between sources? Read why.


What Else Does Sony Offer?

Check out the 2015 Sony Catalog to see what else is new from Sony in 2015



¹"70 watts" is based on preliminary testing and is not a guarantee. Individual results may vary.


Note from Sony: You may need to download the latest firmware for this unit. To download the latest firmware update - Click here

SiriusXM SXV300v1 + $70 Visa Card & 3 Months Free Service*

V300 SIRIUS XM Connect Vehicle Tuner for Adding Satellite Radio to Any SiriusXM-Ready Car Stereo
Quantity: 1

Product Features:

  • SiriusXM Connect Next Gen Vehicle Tuner for adding SiriusXM Satellite Radio to any SiriusXM-ready car stereo
  • Able to connect to and control SiriusXM through vehicles car audio system
  • No need for any translators or cable adapters
  • Compact size allows for discrete behind the dash mounting for a complete integrated look
  • Able to pause, rewind and replay up to 30 minutes of live XM Satellite Radio
  • Alert notification when your favorite song, artist, or team is playing
  • iTunes tagging capable for tagging and future purchasing of music via iTunes
  • Easy and quick installation
  • Use TuneMix™ to hear a mix of songs from your favorite channel¹
  • Use TuneScan™ to preview songs that you have not yet heard on your favorite channels¹
  • Keep up with the big plays for your favorite teams with SportsFlash™¹
  • Keep Moving with the most current updates using Traffic & Weather Now™¹
  • Dimensions: 3-1/2"W x 3/4"D x 2"H
  • Found as: V300v1, V300, Replacement for V200 Tuner, SXV300
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
What's In the Box
  • SiriusXM Connect Vehicle Tuner
  • Magnetic Mount Antenna
  • Installation Guide

SiriusXM SXV300v1

The SXV300v1 SiriusXM Connect 2.0 Vehicle Tuner works with in-dash receivers that have a "SiriusXM ready" logo. this adapter is not compatible with receivers that have "SAT Radio Ready", "Sirius Ready DC", or "XM Ready" logos.

Click Here for Our Stereo Compatibility Chart!

Note:
Consult car stereo receiver manufacturer for detailed description of features, operations and capabilities.

A subscription to XM is also required. Satellite radio service is available only within Canada and the lower 48 states — not available in Hawaii or U.S. territories.


*$70 Visa Card ships from SiriusXM and requires a new satellite radio subscription to be activated.
Click HERE for details

Polk Audio DXi6501 (DXi 6501) db6501 inspired

6-1/2" 2-way Component Car Speakers - Same Performance as DB6501, Marine Certified for Boats!
Quantity: 1

General Features:

  • 6 1/2" DXi Series Flagship Component Car Speakers
  • Power Handling:
    • Peak: 600 watts per pair / 300 watts each
    • RMS: 200 watts per pair / 100 watts each
  • Recommended Power Range: 10 - 100 watts RMS per channel
  • Dynamic Balance polypropylene cone
  • Butyl Rubber surround
  • 1" liquid-cooled silk/polymer composite dome tweeter
  • Top-mount Depth: 2"
  • Cutout Dimensions: 5"
  • 4 ohm impedance
  • Frequency Response: 35Hz-23kHz
  • Sensitivity: 92dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Per Pair

Check out the DXi6501 Owner's Manual



Kicker CompR CWR124 (40CWR124)

1000W 12" CompR Series Dual 4 ohm Subwoofer
Quantity: 1

Kicker Authorized Dealer

General Features:

  • 12" CompR (CWR) Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Recommended power range: 200 - 500 watts RMS
  • Impedance: Dual 4 Ohm
  • Push-button wire terminals featuring impedance-selector provide installation flexibility
  • Injection molded polypropylene cone
  • Ribbed, tough Santoprene surround
  • Large-diameter, progressive-roll spider with high-strength Spiralead tinsel leads
  • One-piece UniPlate with vented pole piece and bumped back plate
  • Added voice-coil clearance for full excursion
  • High-temperature voice coil wire to allow subwoofer to handle high power without overheating
  • Quad venting included vertical and horizontal slots under the cone for ultimate cooling
  • Full-coverage steel basket with minimized mounting depth
  • Frequency response: 25-500 Hz
  • Sensitivity: 86.9 dB
  • Mounting depth: 5-3/4"
  • Replaces the best-selling Kicker CVR (CompVR) series
  • Item is a part of Kicker ProFit Group
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Tips for Installing the 40CWR124 Subwoofer


JBL MS-A5001

Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1

General Features

  • MS Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 468 watts x 1 chan.
    • 2 ohms: 692 watts x 1 chan.
  • CEA-2006 compliant amplifier
  • Digital signal processing amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wireless Remote bass level input (JBL MS-WBC remote level control sold separately)
  • Built-in display shows tone and gain settings
  • Soft Start Turn-on
  • Mono channel operation
  • "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
  • Speaker-level inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Digital input-mixer control eliminates the need for Y adapters
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • CD for system setup included
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity: 100mV - 20V
  • Signal to Noise Ratio: 80 dB
  • Frequency Response: 20 - 270 Hz
  • Selectable crossover slopes: 6 dB/oct, 12 dB/oct, 24 dB/oct
  • Variable low-pass filter: 97 points from 20 - 140 Hz
  • Variable high-pass filter: 97 points from 20 - 140 Hz
  • Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
  • 4 - 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Recommended Configurations:

  • Two JBL GTO1214 12" Subwoofers wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS
  • One JBL W12GTi-MkII 12" Subwoofer wired to a 3ohm load for 500W - 725W RMS
  • One JBL GT5-2402BR Dual 12" Subwoofer/Enclosure wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS
  • Two Infinity Kappa 120.9W 12" Subwoofers wired to a 2ohm load for 692W @ 13.42v - 826W @ 13.28v RMS

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

NVX XKIT82

100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit w/ RCA Interconnect and 40 ft Speaker Cable
Quantity: 1

General Features:

  • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 600 watts RMS
  • Premium power and ground wire provides optimal power transfer
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
  • Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Strand Count: 735
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 8 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
  7. One 5/16" black rubber firewall grommet
  8. Two 8 gauge spade terminals
  9. Two black 16 gauge nickel-plated spade lugs
  10. Three blue 16 gauge nickel-plated spade lugs
  11. One black 18 gauge spade terminal
  12. Two 18 gauge red butt connector
  13. Ten 4" black zip ties

Amplifier Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

40 watts x 4 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

100 watts x 4 channels

Amplifier Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

500 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

20 - 140 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

20 - 140 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Optional (Accessory required and sold separately)
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 2 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Soft Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk-Polymer Composite
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Dynamic Balanced polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
100 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
35 - 23000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2"

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
CompR / CWR (Kicker)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
100 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
35 - 23000 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Dark Gray
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Dynamic Balanced polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
11"
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2"
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
2.25 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.75 cubic feet
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
4.6 cubic feet
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed

Electromechanical Parameters

Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
65.294 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
.648
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
8.166
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
.703
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
3.5 ohms
Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
32.6 Hz

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

SXV300v1_MEX-XB100BT_DXi6501_40CWR124_MS-A5001

Weight

38.63lbs

Internal SKU

sxv300v1_mexxb100bt_dxi6501_40cwr124_msa5001

Internal Product ID

116415

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Sonic Electronix Semi-Professional Car Audio System

  • Sony MEX XB100BT Bluetooth Amplified Car Stereo | Product Overview
  • Sony MEX-XB100BT Amplified Car Stereo Dyno Test | SMD D'Amore AD-1
  • Sony MEX-XB100BT Amplified Car Stereo | Whiteboard Session
  • JBL MS Car Amplifier (MS-A1004 & MS-A5001) | Car Audio Amp
  • How To Install A Car Stereo (5 Easy Steps)
  • Polk Audio DXi Series Marine Certified Car Speakers | Product Overview