Garage
Shop

500 Watt RMS Polk Audio and JL Audio 10" Bass Package

500W RMS PA D Series Class-D 2-channel Car Amplifier + 500W RMS 10" W3v3 Series Single 4-Ohm Subwoofer

EXCLUSIVE
Product videos
highlight-star-icon

• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

Learn more about the pad20002_10w3v34

We apologize

This item has been discontinued

Product Highlights


• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

Description


Polk Audio brand icon

Authorized dealer

Polk Audio PA D2000.2 (PAD2000.2)

500W RMS PA D Series Class-D 2-channel Car Amplifier
Quantity: 1

Product Features:


 

 
  • PA D Series 2-Channel Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 125 watts x 2 chan.
    • 2 ohms: 250 watts x 2 chan.
    • Bridged, 4 ohms: 500 watts x 1 chan.
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Mono or 2-Channel Operation
  • LED power (blue) and protect (red) indicators
  • Soft start turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-way protection circuitry (thermal, overload, reverse polarity & speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 20 - 20,000 Hz
  • Damping Factor: >100
  • Total Harmonic Distortion (THD): <0.1%
  • Signal to Noise Ration: 105 dBA
  • Selectable crossover modes: FULL / HPF / LPF
  • x10 Frequency Multiplier, Both Channels
  • Variable high-pass filter: 20 - 400 Hz (x10 Capable), 12 dB/octave
  • Variable low-pass filter: 50 - 500 Hz (x10 Capable), 12 dB/octave
  • Fuse Rating: 25A x 2
  • Supply Voltage: 10V - 16V
  • 12 AWG Speaker Connections
  • 4 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 6-3/4"W x 8-1/4"L x 1-13/16"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Check out the Polk Audio PA D2000.2 Owner's Manual Important Note: Early versions of this amplifier included a "Terminal Adapter". As of 2015, Polk Audio has confirmed that they are no longer sending this adapter with their amplifier, albeit referenced in the user manual. We apologize for any inconvenience, and suggest browsing our selection of "Gauge Adapters" if you wish to use larger than recommended wiring. Thank you!

JL Audio 10W3v3-4

500W RMS 10" W3v3 Series Single 4-ohm Subwoofer
Quantity: 1

Product Details:

  • 10" Single 4 ohms W3 v3 Series Subwoofer
  • Power Handling:
    • RMS: 500 watts
  • Mineral-Filled Polypropylene Cone
  • Nitrile Butadiene Rubber NBR Surround
  • Stamped steel basket
  • Customization trim ring
  • Floating-cone attach method
  • Highly linear, DMA-Optimized motor system
  • Insert molded suspension, coil and terminal sub-assembly
  • Vented reinforcement collar (VRC)
  • Elevated frame cooling design
  • Nickel plated brass spring terminals
  • Engineered lead-wire design and attachments
  • 14 mm Xmax
  • Frequency Response: 25 - 250 Hz
  • Resonance Frequency (Fs): 31.49 Hz
  • Sensitivity: 84.87 dB
  • Recommended sealed box volume: 0.625 cubic feet
  • Recommended ported box volume: 1.125 cubic feet
  • Top-mount depth: 5.93"
  • Cutout diameter: 9.0625"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
125 watts x 2 channel
RMS Power @ 2 ohms
250 watts x 2 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
500 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
2-Channel
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
20 - 4000 Hz
Low-Pass Crossover Frequency
50 - 5000 Hz
Signal-to-Noise Ratio
105 dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
25A x 2 
CEA-2031 Compliant
Yes
Subwoofer Specifications
Series
W3 v3 Series
Subwoofer Size
10"
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
500 watts
Woofer Surround
Nitrile Butadiene Rubber NBR
Woofer Composition
Mineral-Filled Polypropylene
Sensitivity
84.87 dB
Frequency Response
25 - 250 Hz
Xmax (millimeters)
14 mm
Top-Mount Depth (Mounting Depth)
5.93"
Cutout Diameter
9.0625"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

PA D2000.2_10W3v3-4

Weight:

19.10lbs

Internal SKU:

pad20002_10w3v34

Internal Product ID:

116435

Product and How-to Videos


Customer Ratings & Reviews



5 star
83%
4 star
13%
3 star
2%
2 star
0%
1 star
2%



Durability
4.8
Value
4.7
Features
4.7
Design
4.8
Usability
5

Customer Reviews

Sort by:

Loading...

Un Excelente Sub

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

Tengo instalado uno solo de éstos en un pick-up cabina sencilla, caja ventilada y creanme que estoy mas que satisfecho con el desempeño de éste subwoofer, una calidad excelente de sonido y no existe distorsión alguna, lo muevo con un Phoenix Gold de 600nom. y es mas que suficiente, quieres calidad en sonido y resistencia???? no lo dudes, adquierelo....!!!

I have one of these installed in my pickup truck, single cabin, vented box. Believe me, I am more than satisfied with its performance. This Subwoofer has excellent quality and there is no distortion. I push it with a Phoenix Gold of 600watts and its more than enough.
If you want good quality sound, don't even doubt about it and get it!

By alx30 on March 23, 2010

61

found this helpful.

amazing

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

I just had one of these and j2 500.1 installed in my wifes car and man it bumps so worth the money I am now and forever a huge JL fan. If you want a great sub for a fair price look no more.

By lu on February 22, 2011

60

found this helpful.

Great subwoofer

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

Very crisp, clean sound when driven from a good amp.

By Matthew on October 30, 2011

57

found this helpful.

JL Has no competition

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

You cannot go wrong with any JL products, this sub hits many notes & is a reliable subwoofer. You get what you pay for :)

By A. Tran - Kill-illuminati on April 20, 2011

56

found this helpful.

JL Audio never lets me down

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

2 10" JL Audio3v3-4, paralleled down to 2 ohm. Amp is a G1700 Mono and can handle the load, won't push them up to optimum at 2ohm which is 500rms but takes them close enough for me. Box is sealed and fits nicely in the back of my Nissan Maxima, ported might be louder but I wanted the clean slap to the back of the head when a drumbeat kicks one out not a synthesizer. Kept the factory head and used the jl cleansweep to level out the signals for the amp to work with.

By Kev on December 10, 2011

56

found this helpful.

Love my JL 10w3

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

This gave me just the right amount of bass in my crew cab truck. I prefer the sealed box because it gives you a much more clean bass. Not the distorted bass you hear with cheap subs. I would recommend this to everyone. This is the perfect mid size sub for small spaces. It has much better bass then my friends 8w7 overall! That 8w7 gets low but if you just want GREAT quality bass stick with the 10w3 its an amazing thing. I am running a JL Slash V2 500/1 and you can tell they are meant for each other. I would for sure say buy this sub!

By Alex on November 19, 2011

54

found this helpful.

Best Sub for the price!

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

The sub sounds great and hits very hard!

By Dorian on May 15, 2011

53

found this helpful.

JL sub

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

Hits pretty darn deep!

By Twatts on July 26, 2011

49

found this helpful.

Amazing Sub!!!

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

I recently put in a system in my 04 Chevy Reg. cab. And picked JL Audio cause I know they make one of the best speakers and subs out there, and that they would last. Anyways to make the story short, I hooked one up to a MTX Jackhammer(jh600) that is wired at 4ohms throwing 450rms. With the bass on +1 from my deck and it bangs so hard my rear view shakes as do my side mirrors. So if your looking for a sub for a small enclosure, that's quality, and cheap. Buy it at Sonic electronix.

By Ryan on March 18, 2010

47

found this helpful.

Jl audio rocks!

The following review is for 10W3v3-4, which is a part of the bundle you are viewing.

The single 10 inch woofer is enough for quality sound in my Honda accord. Of course the speaker was professionally installed in a custom enclosure with alpine 117. If I wanted to upgrade I would buy again from Sonic.

By William on March 31, 2011

45

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


PA D2000.2_10W3v3-4 small

Item added to your cart.

Price: $464.57

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon