Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

MTX Audio Terminator TN200/2

300W Max 2-Channel Terminator Series Amplifier

In Stock
|

List price $159.95

$99.99

with warranty

You Save: $59.96 (37.49%)

Arrives by Monday, Aug. 4 to zip 98109

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Mon, Aug. 4

Bundled Savings with this Product

=

50% off NVX 2-Channel RCA Cables w/ purchase!

Save 50% off the NVX XIN25 2-Channel RCA Audio Interconnect cables with your purchase! You will need RCA cables to install your amp! You pay only $5 for a sweet set of RCAs from a premium brand!

4.50

11876

426

MTX Audio Terminator TN200/2

$99.99

+

50% OFF

NVX XIN25

$8.99

Special Price $4.49 ($8.99 if purchased separately)

NVX XIN25

• Shielded Coaxial Conductors for Solid Performance • Compact, Stylish RCA Body • Chrome Ends

(Offer 1 of 1)

Combined Total Price

$104.48

You Save $4.50

Authorized MTX 

Dealer
  • Terminator Series 2-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 45 watts x 2 chan.
    • 2 ohms: 75 watts x 2 chan.
    • Bridged, 4 ohms: 150 watts x 1 chan.
  • Max power output: 150 watts x 2 chan.
  • LED power and protection indicators
  • Gain control
  • Smart engage auto turn-on circuitry
  • Built-in adaptive cooling fans
  • Fixed high-pass filter (85 Hz, 18 dB/octave)
  • Fixed low-pass filter (85 Hz, 18 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-200 Hz
  • Dimensions: 13-1/16"L x 10-3/16"W x 2.3"H
  • 4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

45 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

75 watts x 2 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

150 watts x 1 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

150 watts x 2 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Terminator (MTX)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

300 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

150 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

Fixed (85 Hz)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

Fixed (85 Hz)
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
78 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Yes
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
20A x 1 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
57%
4 Star
29%
3 Star
14%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.3
Value
4.4
Features
3.1
Design
4.1
Usability
4.1

Will

Bristow, VA

Overall
Durability
Value
Features
Design
Usability

Incredible amp.

November 17, 2013

I bought this amp secondhand from a friend after a year+ of abuse powering two mtx 12's in the "Terminator" package. For around 6 months i had this amp powered by a computer power supply in my room, for those of you who don't know it's horrible for the amp, playing the 2 12's full volume for hours on end. Now its in my car and i have the remote attached to the positive terminal so its taking a full 12v on the remote, plus its bridged and playing the 2 12's wired down to two ohms, plus i keep it under the floor in the trunk so its getting little to no ventilation, and it just wont die! It cant die! This amp can output near its max forever and ask to be played some more! I haven't had ANY problems, even with overheating. In my application this set up is comparable to systems that cost 5 times as much. The audio quality isn't top notch and the low pass filter isn't adjustable (because it really isn't there) but come on, its a killer peice of hardware for $80!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Great

New York

Overall
Durability
Value
Features
Design
Usability

TN200/2

October 16, 2012

Overall great bang for your buck I have four 6x9 and two tweeters connected to it. Sounds amazing just needs good airflow or will overheat easily. I solved this by making sure nothing was blocking the inlets and outlets and moved away from other amp but is a really great amp would buy again.

0 of 0 found this helpful

Help our customers find the most helpful reviews

WILFREDO

SHILLINGTON, PA

Overall
Durability
Value
Features
Design
Usability

Wow!

October 4, 2012

This amp is VERY powerful and will burn your speakers if they don't have enough power to handle it. The sound that this amp produces is crystal clear, beautiful and clean. You will not be disappointed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

guero

san antonio tx

Overall
Durability
Value
Features
Design
Usability

Great amp

September 16, 2012

Good reliable amp for the money..... Very user friendly and it also looks awsome mounted with a set of 12 inch Terminator series subwoofers

0 of 0 found this helpful

Help our customers find the most helpful reviews

squishimonster

sylmar, CA

Overall
Durability
Value
Features
Design
Usability

great value

October 10, 2011

I bought this amp from another retailer for 100 dollars after arguying about the low wattage posted on the box the person who sold it to me told me it will blow my 12". I have a kicker comp 400rms being pushed by this amp going though a sondstream bx-10. I had to actually turn this amp down it will blow your speaker. It has low power listed on the box but it pushes well beyond it. The only bad part is it has no adjustments only gain and bass boost luckily my alpine has a well built in eq which almost requires a college degree.

0 of 0 found this helpful

Help our customers find the most helpful reviews

maze 1

jonesboro ga

Overall
Durability
Value
Features
Design
Usability

cooling fan

December 18, 2010

I bought this amp a few years ago. It's a descent amp. But I don't suggest to put this amp in a area in where there is no insulation. The amp has a cooling fan but when the amp gets hot it shuts off. I don't recommend to buy this amp without installing it in a well insulated area.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Gilbert, AZ

Overall
Durability
Value
Features
Design
Usability

Great ampt for 2 10's

September 8, 2010

I just bought this amp last week. I was optimistic because MTX usually downplays the power of their amps, but also a little worried because the wattage was so low. I was very surprised at how light the amp was, but the power is definitely there. DO NOT BRIDGE this amp because it tends to cut out, but provides plenty of power for 2 10's with the non-bridge setup. For the price this does really good. I would NOT recommend pushing 12's with this amp, but at the same time I haven't tested it either.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

Your Price $7.99

Small Universal Remote Level Bass Control

The Scosche RLC is a smaller universal bass remote that connects via RCA inputs.

Your Price $11.99

StreetWires FB8

8 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

Your Price $11.99

StreetWires ZN5 Series Interconnect Cable

16.4 ft. of ZN5 Series 2-Channel cable with twisted pair construction and oxygen-free copper for increased signal transfer with less unwanted noise.

Your Price $22.95

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

Product Summary

Manufacturer

Model Number

TN200/2

UPC

715442280025

Weight

8.00lbs

Internal SKU

tn2002

Internal Product ID

11876

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX Audio Terminator TN200/2

  • MTX Audio Car Amplifiers
  • How to Install a Car Amplifier