Expert Service 1-661-257-9993 [Hours]

Kenwood KAC-7005PS

Out of Stock - Backorder
|

Thanks , You Pay:

$149.99

with warranty

+ FREE Shipping in US 48

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 5-Channel Performance Series Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 40 watts x 4 chan. + 300 watts x 1 chan.
    • 2 ohms: 50 watts x 4 chan. + 500 watts x 1 chan.
    • Bridged, 4 ohms: 100 watts x 2 chan.
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
  • Soft start turn-on
  • 5/4/3/2 or Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable high-pass filter (50-200 Hz, 24 dB/octave)
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-50000 Hz
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 13-2/10"W x 7-2/3"D x 2-2/10"H
  • 1-year Sonic Electronix Warranty

Specifications

Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Height
The height of the item, measured from top to bottom, in inches.
Width
The width of the item from left to right (side-to-side) measured in inches.
Color
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Browse 7 questions and 24 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Its for a sound system upgrade in my Jeep.Was advised this amp will handle 4- 6" round speakers and a sub
jerry h on Dec 5, 2016
will run the hole system without multi amps
Tejay S on Jun 11, 2015
All Kenwood Audio in truck
Michael S on Oct 10, 2015
Best product for the money for what I am doing. Price was fair and Kenwood is a trusted name in car audio.
Johnny P on Dec 14, 2014
can i connect 2ohm load for the subs and 4ohm for my mids?
Dannis L on Sep 20, 2014
Best Answer: Yes
Reply · Report · brandi e on Sep 21, 2014
· Add Answer · I Have This Question Too (0)
Can i run 2 10inch subs of this amp?
A shopper on Jul 11, 2015
Best Answer: Hello,

You can run as many as you want. From 1 to 132 and on and on . The number of drivers doesn't matter, its making sure the figures match in relation to the final impedance. Now, 132 drivers is obviously hyperbole, but if i could manage wiring those 132 drivers to a 2ohm final load and those drivers are happy running off of ~>4 watts each, then I'd have a working system. For YOUR setup, you would want two 10" inch subs asking for ~250w RMS each and need to be either Single 4-ohm or Dual-2ohm so they can be wired to a 2ohm load. Give our sales team a call for further assistance, but please have a model number (for the subs) handy and not just a description.
Reply · Report · Rick MStaff on Jul 11, 2015
· Add Answer · I Have This Question Too (0)
Can I use a dual 2 ohm sub made in to a dual 1 ohm on this amp?
Chris B on May 6, 2015
Best Answer: I'm assuming that you mean dual voice coil, with 2 ohms per voice coil, wired in parallel to the amp, for a single channel of 1 ohm @ the amp. The user's manual states that 4 ohms is the minimum sub impedance. So your sub would work with this, but it would need to be wired in series (for 4 ohms), not parallel (which gives you 1 ohm)

I installed this in the son's Trailblazer, which has an open cab design. Using a dual voice coil, 2 ohm per voice coil Alpine 12", wired in series for 4 ohms @ the amp, it puts out pretty good bass. As a matter of fact, with the cheap MB Quarts in the doors, proper sub enclosure, sub and this amp, his system sounds very smooth, just the way I like it.
Reply · Report · Tim D on May 8, 2015
· Add Answer · I Have This Question Too (0)
Is this a Class D or Class A/B amplifier?
A shopper on Apr 21, 2016
Best Answer: Both sub channel is Class D and other channels are Class A/B
Reply · Report · Christopher W on Apr 21, 2016
· Add Answer · I Have This Question Too (0)
What would the output be at 12v? It's spec are rated at 14.4v
A shopper on Nov 22, 2015
Best Answer: on most cars when the engine is running and the alternator is charging the battery, you will see a voltage at the battery of 13.8-14.5 volts, so the amplifier will perform at its rated specs of output power. With key on and engine not running you will have 12 volts, but the power management circuitry in the amp will keep the output very close to stated specs.
Reply · Report · Ed Z on Nov 23, 2015
· Add Answer · I Have This Question Too (0)
How would I tune the LPF and HPF, if I want it to cross at 150Hz?
A shopper on Feb 11, 2015
Best Answer: Hello,

You've essentially answered your own question with your question. You simply set your LPF & HPF to 150Hz . By doing so, your Mid-Range will begin at 150Hz & up and Your Subwoofer will pick up at 150Hz & down . If you are asking because you don't trust the crossover points on the amplifier, then you will only get an accurate setting with the use of a Crossover Calibrator, like the SMD CC-1 .
Numark CC-1
Numark CC-1
Reply (1) · Report · Customer SStaff on Feb 11, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

KAC-7005PS

UPC

019048197597

Weight

7.00lbs

Internal SKU

ls-kac7005ps-obc264249

Internal Product ID

118851

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kenwood KAC-7005PS