Expert Service 1-661-257-9993 [Hours]

Hifonics Amplifier and Auxiliary Battery Kit Combo

1100W RMS BRX1100.1D Monoblock Amplifier + XP750 AGM Battery Power Cell + Installation Kit for 1000-1500 Watt Audio System

List price $669.98

You Save: $385.04 (57.47%)

Thanks , You Pay:

$284.94

with warranty

+ FREE Shipping in US 48

Order within 52 hrs 3 mins to ship 12/12

Arrives by Wednesday, Dec. 14 to zip 20147

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Hifonics Amplifier and Auxiliary Battery Kit Combo

1100W RMS BRX1100.1D Monoblock Amplifier + XP750 AGM Battery Power Cell + Installation Kit for 1000-1500 Watt Audio System

$284.94

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

$141.83

Add

Don't see the accessory you're looking for?
View all available accessories for the Hifonics Amplifier and Auxiliary Battery Kit Combo.

Get FAST answers from customers ASK a Question See questions answers

Hifonics Brutus BRX1100.1D

1100 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 1100 Watt)
Quantity: 1

General Features:

  • Brutus Series Monoblock Class NextGen Super-D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 450 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
    • 1 ohm: 1100 watts x 1 chan.
  • Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
  • Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
  • Lighted connectors and blue wash of light from the underside of the heatsink
  • LED power (green) and protect (red) indicators
  • Wired remote bass level control included
  • Built-in system diagnostics
  • 1-Ohm Stable operation
  • 10 AWG speaker output connections
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Full-range Preamp RCA outputs to daisy chain multiple amps
    Full-range only if a full range signal is connected to input
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Master/Slave Mode with Output/Input Switch and Dedicated RCA connections
  • Input sensitivity: 200mV - 9V
  • Variable low-pass filter: 35 - 250 Hz
  • Variable sub-sonic filter: 15 - 35 Hz
  • Variable Bass Boost (Bass EQ): 0 - +10 dB at 45Hz
  • Frequency response: 10 - 250 Hz
  • Damping factor: >200
  • Signal-to-noise Ratio: >95dB
  • Total harmonic distortion: 0.10%
  • Fuse Rating: 60A x 1
    Design may vary from picture on website
  • CEA-2006 compliant amplifier
    Confirmed by Manufacturer
  • Dimensions: 14-3/8"L x 10-5/16"W x 2-1/2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the Hifonics BRX1100.1D Owner's Manual

XS Power XP750-CK

XP750 AGM Battery Power Cell + Installation Kit for 1000-1500 Watt Audio Systems
Quantity: 1

What's In The Box?
  • (1)XS Power XP750 Battery
  • (1) Battery Holder
  • (1) 18 ft. 4 Gauge XP FLEX BL Cable
  • (1) 3 ft. 4 Gauge XP FLEX Ground Cable
  • (6) XS Power Brand Heat Shrink
  • (6) 4 Gauge Crimp Terminals
  • (2) Battery Clamps
  • (2) Grommets
  • (2) Fuse Holder, ANL, Set Screws
  • (2) Fuse, ANL, 200A
  • (10) Wire Clamps
  • (10) Zip Ties
  • (10) Screws

Wiring Features:

  • All-in One Battery plus Battery Wiring Kit
  • Designed for 600-800 watt audio systems
  • 4 gauge Pre Ring terminated power and ground wire with protective heat shrink wrap
  • Thick but flexible CCA Copper-Clad Aluminum wiring
  • XP FLEX Frosted Black ground wire
  • XP FLEX Frosted Blue ground wire
  • Complies with American Wire Gauge (AWG) standards
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Recommended Accessories:
  • A Battery Isolator is STRONGLY recommended when installing a second battery:
    • Prevents secondary battery from draining the starting battery
  • Big 3 Upgrade Kits:
    • To get the most out of your new power system check out our Big Three Upgrade Kits

Battery Features

  • 12-Volt Deep Cycle AGM Power Cell
  • Sealed absorbed glass mat (AGM) design
  • Designed for use as an additional battery to power your high-performance sound system
  • Leak-Proof, non-hazardous design
  • Stores energy so you don't need a capacitor for your system
  • No external vents allow this battery to be mounted in any position with no leaks
  • Resists extreme vibrations for ultimate performance
  • 100% Sealed and maintenance free
  • M6 Terminal hardware included
  • XS Power 580 terminal post adapters available
  • Authorized Internet Dealer
  • 2-year Manufacturer's warranty
Battery Specifications
  • Cranking Amps: 750
  • Maximum Output: 750 Amps
  • Amp Hours: 22
  • Weight: 14.5 lbs
  • Dimensions: 7-1/8”L x 3-1/16”W x 6-3/4”H

Note: This battery is intended to be used as an auxiliary battery (trunk or marine applications). Not intended for under the hood or extreme heat.



Check out the XS Power XP750-CK Installation Procedure

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
450 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
800 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1100 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1100 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

35 - 250 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 35 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 10 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
60A x 1 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Auxiliary Battery Kit Combo

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Browse 1 question and 2 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
fits my need as of right now
will I on Sep 26, 2016
I ALSO NEEDED THIS
ERIC D on Jul 26, 2016

Product Summary

Manufacturer

Model Number

BRX1100.1D_XP750-CK

UPC

818060017476

Weight

29.70lbs

Internal SKU

brx11001d_xsp-xp750ck

Internal Product ID

119269

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Hifonics Amplifier and Auxiliary Battery Kit Combo