Expert Service 1-661-257-9993 [Hours]

Precision Power PPI P900.5

900W RMS, Phantom Series Class D Full Range 5-Channel Amplifier

Out of Stock - Backorder
|

Thanks , You Pay:

$199.99

with warranty

+ FREE Shipping in US 48

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

Product Features

  • Phantom Series Class D Full Range 5-Channel Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 70 watts x 4 chan. + 270 watts x 1 chan.
    • 2 ohms: 115 watts x 4 chan. + 440 watts x 1 chan.
    • Bridged, 4 ohms: 230 watts x 2 chan. + 440 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • On/Off circuit delay
  • 5/4/3/ channel operation
  • 3-Way System Protection circuitry
  • Tri-mode capable
  • Band-pass crossovers
  • Input source selector
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Dimensions: 11-1/2"L x 6-1/2"W x 2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Specifications

Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Height
The height of the item, measured from top to bottom, in inches.
Width
The width of the item from left to right (side-to-side) measured in inches.
Color
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Browse 9 questions and 40 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Replacement amp for a burned out JL amp
Robert B on Jun 8, 2016
These amps are considered a great deal in the world of SQ car amps.
James T on Mar 23, 2016
Reviews on this were good, i was surprised when i installed it, that the sound quality exceeded my expectations. At the price I didn't think i could go wrong...the reviews are true about the strange connection terminals with a bar in the way and the manual is all but useless, particularly if you are looking for the proper way to bridge the 4 channels.
Beau L on May 7, 2016
Compact Size, Power Ratings I was looking for, and this amp has many favorable reviews for its price point. I actually purchased two of these. One for my left side and one for right side.
DBA - on Jan 31, 2016
How soon will Precision Power PPI P900.5 be in stock?
A shopper on Aug 8, 2014
Best Answer: Hello,

At the time of this message, it has been reported to that the Precision Power PPI P900.5 is on a Manufacture's Backorder Until AT LEAST Late October.
Reply · Report · Customer SStaff on Aug 12, 2014
· Add Answer · I Have This Question Too (4)
Can I the 4 channel at 4 ohm and the subwoofer at 2ohm with this amp?
Chris S on Oct 15, 2014
Best Answer: Yes absolutely. I have the 4 channel half running at 4 ohms on all my 6x8s and the sub channel is at 2 ohms on my two 12s and it barely gets warm. I've run it hard everyday since April with no issues.
Reply · Report · Adam B on Oct 16, 2014
· Add Answer · I Have This Question Too (1)
How do I run a 4 ch amp and a 2 ch amp off of only 2 RCA outs from my head unit? I have a clarion m502 and want to run a PPI P900.4 for my 4 cabin speakers and a PPI P600.2 bridged for my subwoofer.
Longdrive on Aug 10, 2014
Precision Power P900.5
Precision Power P900.5
Clarion M502
Clarion M502
Crunch P900.4
Crunch P900.4
Precision Power P600.2
Precision Power P600.2
Best Answer: Hey Darin, first you need to get two 1-male to 2- female connectors(http://www.sonicelectronix.com/item_45066_NVX-XIN2F.html) and attach them to each of the rear RCA cables on the rear of your Clarion head unit. Next you will connect your P900.4 to the front channel like normal, and connect it to the rear like normal, only you will now have 2 extra RCA cables left that you will use to connect your 600.2 with. I hope this is clear enough to answer you question
Reply · Report · Brandon R on Aug 10, 2014
· Add Answer · I Have This Question Too (1)
What is the "source' switch that has choices for "int" and "sub" for/do?
Sean W on May 14, 2016
Best Answer: looking at my manual, it doesn't give specifics on that circuit. But from my year's of car audio experience. What I believe is, if you only use the front output from your receiver to connect to this amp. You would insert your RCA cables into the front input RCA's of the amp. You would then select ST for *input select (#3 in manual). Then the source would be set to INT.

If you put a parametric EQ in between your amp and receiver like I did to have more control and quality sound. You would connect the receiver's front output RCA's to the EQ front input. From the EQ, it has dedicated RCA's for front, rear, and sub. I use all three sets of RCA's from the EQ to connect to the amp instead of just one. I set the amp *input select to 4ch and set the source to sub because the sub channel of the amp now has its own dedicated signal from the EQ. Where as in the before setup, you have full frequency range coming from your receiver to the amp through the amps front input only. The amp has a small built in 3 way internal crossover that splits the frequencies when you select Int for the source. It basically gives options for system building. Using my method gives a lot better sound quality because I'm using a much larger 3 way crossover ( my parametric EQ). Hope this helps
Reply · Report · Russell R on May 21, 2016
· Add Answer · I Have This Question Too (0)
how do I connect 4 gauge wire to amp?
Jim W on May 22, 2015
Best Answer: from what I remember, the amp comes with a 4 gauge adapter that plugs into the power, ground, and remote using gold plated posts. This adapter looks like a three pronged block that you then use to plug in 4 gauge power and ground and your remote wire, which remains its standard 18-22guage size. This amp is amazing, i could not be happier.
Reply (1) · Report · diana f on May 22, 2015
· Add Answer · I Have This Question Too (0)
I have four punch 6x8's and a punch p1svc4ohm 12". Will this amp do the trick? I currenty have a prime 250.4 running the 6x8's and they don't sound too good. The p1 is extra from another setup not currently being used. I would like to just use a one amp setup.
Jason L on Dec 21, 2014
Best Answer: it may have been wise to purchase a dual 4ohm voice coil sub so you could wire it parallel bringing the ohm load on the amp down to 2 ohms. that way you would have achieved 440 watts at a 2 ohm load instead of 270 watts at the 4 ohm load you are left with now. not sure where/when you purchased your other equipment, but when planning a system it is always wise to think ahead, map it out, and really contemplate how all of your components are going to interact and work together. that being said, your sub is only rated at 250 watts RMS, thus running it at 4 ohms should be just fine, in fact, even preferable since it should have a little less distortion and will be easier on your amp (and it will run cooler). you could probably get away with running two of the subs you have (2 single 4 ohm drivers can be wired parallel into a 2 ohm load). the RMS rating would be 500 watts, and you'd be pushing 440 but that's just fine. Again, it will push your amp a little harder, but this amp is up to it. trust me. I am running a 10" 4 ohm DVC Kicker L7 and that is rated at 600 rms…. and it sounds amazing.
Reply · Report · diana f on May 22, 2015
· Add Answer · I Have This Question Too (0)
Does anyone using this amp have the need to use a farad cap? I have a 2.0 farad cap I bought for another vehcle that I never got a chance to use, and was wondering if anyone had the need to use one with this amp.
A shopper on Apr 10, 2015
Best Answer: Hello,

We just wanted to chime in with a quick note. Your question is far to relative to get an answer that is going to suite your application. There are way to many variables involved and no install will be like yours. With that said, we hope you are asking if the Amplifier has the need for the Cap, not the Vehicle. A vehicle doesn't benefit from a Cap, the amplifier does. It just so happens that a vehicle will sometimes benefit from the caps ability to hold a quick burst of energy and so forth. Nevertheless, it is unlikely that your vehicle , unless a very small one, will lack the power needed to run the amplifier. If you fear it does have that lack, then upgrade the battery, don't add another load in the form of a cap. Keep in mind, the vehicle will need to recharge the cap AS well.
Reply · Report · Rick MStaff on Apr 12, 2015
· Add Answer · I Have This Question Too (0)
I purchased the PPI 900.5 on 5/27/15 I installed on 6/22 I used Stinger RCA Interconnect Cables from the HU to the amp for the 4 channel output and the sub output all the 4 channels work, but the sub channel you can barely hear. I double checked all the connections everything is ok. I previously had a PPI S320.4 Sedona amp that I used to bridge 2 channels for the sub and it works fine. Is there something with the 5 channel amp that I am not doing correct? Thanks for any answer.
bob f on Jun 23, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

P900.5

UPC

709483038202

Weight

7.50lbs

Internal SKU

ls-p9005-obc256329

Internal Product ID

119815

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Precision Power PPI P900.5