Expert Service 1-661-257-9993 [Hours]

Hifonics Brutus BRX2400.1D

Out of Stock - Backorder
|

Thanks , You Pay:

$209.99

with warranty

+ FREE Shipping in US 48

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • Brutus Series Monoblock Class NextGen Super-D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 850 watts x 1 chan.
    • 2 ohms: 1600 watts x 1 chan.
    • 1 ohm: 2400 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 1042 watts x 1 chan.
    • 2 ohms: 1474 watts x 1 chan.
    • 1 ohms: 2008 watts x 1 chan.
  • Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
  • Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
  • Lighted connectors and blue wash of light from the underside of the heatsink
  • LED power (green) and protect (red) indicators
  • Wired remote bass level control included
  • Built-in system diagnostics
  • 1-Ohm Stable operation
  • 10 AWG speaker output connections
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Full-range Preamp RCA outputs to daisy chain multiple amps
    Full-range only if a full range signal is connected to input
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Master/Slave Mode with Output/Input Switch and Dedicated RCA connections
  • Input sensitivity: 200mV - 9V
  • Variable low-pass filter: 35 - 250 Hz
  • Variable sub-sonic filter: 15 - 35 Hz
  • Variable Bass Boost (Bass EQ): 0 - +10 dB at 45Hz
  • Frequency response: 10 - 250 Hz
  • Damping factor: >200
  • Signal-to-noise Ratio: >95dB
  • Total harmonic distortion: 0.10%
  • Recommended Fuse Rating: 250A x 1 (Not Included)
  • CEA-2006 compliant amplifier
    Confirmed by Manufacturer
  • Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H
  • 1/0-gauge OFC power and ground wiring is highly recommended for installation, if running amplifier at 2ohms or 1ohm. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 90 Day Manufacturer's Warranty
Recommended Accessories:
  • Auxiliary Battery:
    • An Auxiliary Battery is designed for the enthusiast that needs a proper power reserve, that cannot be had with a capacitor. You don't need a HUGE battery! We are well aware that the Hifonics BRX2400.1D is capable of up to 3000 watts of Dynamic Power, but unless you are competing Every day of your amplifier's life then you likely are only using ~half that power at any given time.
  • Big 3 Upgrade Kits:
    • To get the most out of your new power system check out our Big Three Upgrade Kits. Performing the "Big 3" upgrade to your vehicle will improve the performance of your electrical system and increase its current handling capabilities. This decrease in resistance will reduce light dimming, reduce voltage drops, stabilize voltage and current flow, and decrease the strain being put on your vehicle's electrical charging system.


Check out the Hifonics BRX2400.1D Owner's Manual

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Specifications

Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Height
The height of the item, measured from top to bottom, in inches.
Width
The width of the item from left to right (side-to-side) measured in inches.
Color
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Browse 22 questions and 119 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
I needed a good amp I read the reviews and watched the videos so It seemed this was the right choice for me
rick b on Nov 25, 2016
very good amplifier for the price
Jon G on Nov 14, 2016
Based on reviews!
william l on Nov 15, 2016
I own a 5 channel version amp from this company and have no issues so far.
Scott F on Jun 30, 2016
Farad B on Jan 11, 2015
Hifonics BRX2400.1D
Hifonics BRX2400.1D
Hifonics BRZ2400.1D
Hifonics BRZ2400.1D
Best Answer: Thats where the specs come into play.... ive seen some "better-newer" models have a shorter low-high range or something you may not have noticed before. Really when it comes to the same make and modle id go line for line on the specs, and then of course price, and then look. Dont forget anything over a 1000 amps, your gunna have to upgrade you power supply (battery alternator) to get the full numbers on the box.
Reply · Report · Marc F on Jan 12, 2015
· Add Answer · I Have This Question Too (3)
i have a 0 gauge wire running from the battery to a fused distribution block is it ok that the output of the distribution block is 4 gauge is it ok to be 4 gauge for this amp?
pollo on Apr 19, 2016
Best Answer: It's ok if that's all you have but honestly you are better off running a 2 or 0 guage wire , using a 4 guage wont give you the power that you can get out of it and is kind of wasteful but like I said if you don't have money to spend its fine for now but I recommend upgrading the wire
Reply · Report · Mario H on Apr 19, 2016
· Add Answer · I Have This Question Too (0)
I was wondering if this amp would be enough to handle 2 Hifonics BRX12D4 in a Honda Civic coupe with stock speakers and clarion radio cx305 any answers would help need to get more bass in my car and this box would be a good fit too? Thanks
Mikey on Mar 24, 2016
Hifonics BRX2400.1D
Hifonics BRX2400.1D
Hifonics BRX12D4
Hifonics BRX12D4
Atrend 12DS
Atrend 12DS
Clarion CX305
Clarion CX305
Best Answer: As far as the box goes, it more than fits the needs of what I'm using it for. I have two Rockford P3D2 subs in it and it has an incredible sound. Mine is in the back of a Vibe (sport wagon) and it'll vibrate the whole car. I do not know how it'll do in a trunk but I still believe you won't be disappointed.
Reply · Report · Keith Wingfield on Mar 25, 2016
· Add Answer · I Have This Question Too (0)
Dose it put out true 2400?
Derwin R on Dec 17, 2014
Best Answer: I have 3 hifonics burtis amps.stay with the brutis.they kick ass.
2400 d
2000d the latest series brutis
1200 4 channel
I think they are great clean .
my 1200 5 channel powers 6 6/9 mtx thunders
2400 powers 2 dual voice 12 mtx thunders subs
2000 powers 2 daul voice mtx 10 subs.
I have a jensen 1000 4 channel amp oowers 2 mtx 5/7 thunders and to killer 6/9 kickers.
I used many other amps all crap.only drwa back is the hifonics are large in size.I have 3 amps in my motorhome just kills it .good luck you cant go wrong
Reply · Report · mark d on Dec 18, 2014
· Add Answer · I Have This Question Too (0)
Why dose this amp have 2 channels but it's a monoblock?
Mar dawg on Aug 26, 2014
Best Answer: Hello Mario,

This is going to sound silly, but try to follow me here;
This amp provides two outputs but they are NOT two "channels". The amp is a Monoblock, so you are to assume the outputs come together within. So, if you were to wire a Dual-4ohm sub, in parallel, to one side, then a second matching Dual-4ohm sub, in parallel, to the other, your final load will be 1ohm, because THE OUTPUTS COME TOGETHER WITHIN the amp. If this is all too much to take in, simply use One Positive (+) and One Negative (-), it is the same exact connection. [NO ONE WAY IS BETTER THAN THE OTHER. YOU WILL NOT MAGICALLY GET MORE POWER BY DOING ONE OVER THE OTHER. IT IS LITERALLY THE SAME THING]

The BRX2400.1D is simply set up like a 'pro car audio amp'. Here are a few examples of other proper Monoblocks with the same configuration:

http://www.sonicelectronix.com/pictures_new.php?id=74341&picture_id=1739254

http://www.sonicelectronix.com/pictures_new.php?id=40252&picture_id=2021547

http://www.sonicelectronix.com/pictures_new.php?id=88189&picture_id=2149005
Reply · Report · Customer SStaff on Aug 26, 2014
· Add Answer · I Have This Question Too (0)
Can I use 4 gauge wire for this amp?
xavier t on Apr 1, 2016
Best Answer: Hi Xavier,

As specified in the description: "1/0-gauge OFC power and ground wiring is highly recommended for installation, if running amplifier at 2ohms or 1ohm. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier."

We have to stick with this recommendation. 2ohms MIGHT run fine with a proper run of True Spec OFC 4 Gauge power/ground , but you will likely still get a natural decrease in overall power output, because you are - after all - throttling the power the amplifier is trying to take in.
Reply · Report · Rick MStaff on Apr 1, 2016
· Add Answer · I Have This Question Too (0)
will this push 2 kicker 15 dual voice 4ohm?
xavier t on Mar 24, 2016
Best Answer: I ran 2 12" Rockford fosgate P2 and the amp was only at half before I got distortion. It pushes out tons of power. Those subs are rated at 400 watts and 4 ohms each
Reply · Report · Zachary S on Mar 24, 2016
· Add Answer · I Have This Question Too (0)
Can anyone tell me if theses amps produce a bit more than rated or just what they say?
Damian R on Dec 9, 2014
Best Answer: I have this amp installed in my Mazda 3 with a second battery about 2 feet from the amount connected by as short run of 0000 AWG wire.

I have 2 Sundown audio SA-10D4 wired such that the amps sees a 1 ohm load. The amount is unquestionably powerful, but unfortunately I do not have the test equipment required to test if the amp exceeds the rated power. I suspect it puts out the rated power but does not exceed it
Reply · Report · Djltoronto on Dec 9, 2014
· Add Answer · I Have This Question Too (0)
I plan on purchasing one 15" Kicker CVX dual 4-ohm, will this be enough to power it without any clipping and distortion? I also want to get an auxiliary battery to run it to.
A shopper on Aug 9, 2016
Best Answer: This amp has enough juice to more than oush 2 of those subs. If wanting to run a single 15 i would puck a sub that has either dual 4ohm with rms rating of at least 1500 wats or dual 2ohm with min rms rating of 2000 watts
Reply · Report · Aaron B on Aug 10, 2016
· Add Answer · I Have This Question Too (0)
Hello,

I bought two subwoofers HDS215 Dual 4 / RMS Power 600W and Peak Power 1200W for each one.

I have two questions?

Do you recommend me to buy Hifonics Brutus BRX2400.1D?

Should I buy another new Amp for speakers because I am going to buy four Kenwood KEN-KFC6994PS ? it has 500 watts peak power total 2000 watts

Thanks,

Saleh
A shopper on Nov 7, 2016
Best Answer: What I'm seeing is that you are going off the peak power but you want to go off of RMS power. The amp you bought is very powerful you'll be safe running your speakers in series. If you wire it any other way you risk the chance of blowing the speakers I personally would go with the Hifonics BRX1516.1D and run the speakers parallel. Its a more appropriate amp for the speakers RMS power and more bang for your buck.

For your second question, those are very nice speakers. If you want to run those with an amplifier I would get a four channel amp. If it was my system I would go with the Brutus BRX1200.4, Because those speakers are at 125 watts RMS at 4 ohm. Thanks for the question. Gerald GCI.electronics
Hifonics BRX1200.4
Hifonics BRX1200.4
Hifonics BRX1516.1D
Hifonics BRX1516.1D
Reply · Report · Gerald O on Nov 7, 2016
· Add Answer · I Have This Question Too (0)
I need to buy a extra bass knob for my amp can anyone help me?
Raul M on May 5, 2016
Best Answer: Raul,

We do not carry Hifonics parts and accessories. If it is not found in the accessories tab, then unfortunately we do not have access to the given accessory. We suggest contacting Hifonics Tech Support, who may possibly have a lead for you. http://hifonics.com/contact-us?SID=3km0gcd3v5kgtu2iudtngfatc2 . Alternatively, you can always consider a Universal Remote Gain Control, like the NVX XBRC.

http://www.sonicelectronix.com/item_40536_NVX-Universal-Bass-Knob-XBRC.html
Reply · Report · Rick MStaff on May 5, 2016
· Add Answer · I Have This Question Too (0)
If I wire in 1 Ohm will this amplifier push 1000 watts a piece to 2 12" Type R's? If so is this a good idea and will it slam? I am currently pushing 2 12" rockford fostgates at 260w a piece and am severely unhappy with the lack of "bump". My highs over power the bass right now. I have an Alpine 4 ch amp pushing 4 rockford fostgage speakers that sound great but need more bass.
A shopper on Feb 7, 2016
Hifonics BRX2400.1D
Hifonics BRX2400.1D
Alpine SWR-12D4
Alpine SWR-12D4
Best Answer: Hello,

You were rather vague in your inquiry, but we thing we can assume a few things.

Two Alpine SWR-12D4 wired in parallel to a 1ohm load, will get the 1ohm rating of the amplifier, and that power Will be split among the two subwoofers. So, yes, ~1000w per subwoofer.

Is it "a good idea"? We certainly don't think so, considering the Recommend power range is 250 - 750 watts RMS. "Will it slam"? That is a subjective question that we can't answer, but we can say 1500w+ is pretty big power numbers and considered "well above modest".
Reply · Report · Rick MStaff on Feb 7, 2016
· Add Answer · I Have This Question Too (0)
· Add Answer · I Have This Question Too (0)
what is the rms output rating at 1.3 ohms ?
thomas e on Apr 6, 2016
Best Answer: Its rated 2400 at 2 ohm so I'm guessing 2000 rms at 1.3 ohms or maybe just under 2000rms
Reply · Report · ray c on Apr 6, 2016
· Add Answer · I Have This Question Too (0)
What other components would you recommend with this?
Angela H on Oct 1, 2015
Best Answer: This item is discontinued...
But any subwoofers will do fine.
Reply · Report · Djltoronto on Oct 2, 2015
· Add Answer · I Have This Question Too (0)
got my brx2400.1 install first day to a american bass hd15d2 wired to 1 ohm and after a few minutes the amo started smoking. i switched of an started again after a few minutes it started smoking again. it has enough current around 14.5V...after that it played a lil while and the whole amp jus smoked up. i took it to a technician and he said the mosfets were blown an a capacitor burst. what could possibly cause that?
kyle h on Mar 13, 2015
Best Answer: So as you may see the amp is huge it's just physically big.. So my first question would be what
Cable did you use when you installed it?
A high quality 1/0 is required like stinger or xs power
Or jl audio ... Even fosgate ..only reason I say that is
If your amp draws power from the alternator and or battery and there is resistance from too small of cable or copper clad aluminum which is the worst it will major over heating.. And make all sorts of things happen. So in short cable is important
I would then say what kind of alternator do you have... Because honestly it would take two 200a alternators to power this amp because of its efficiency .. Which is around 65%. When you do the math your amp will draw lots of current in order to produce the 2400 watts..
Then the last thing is your batteries.. Which kind you got and how many. Two xs power batteries would be perfect.. The thing here in this whole answer is you have to feed the amp its power before it makes its power efficiently meaning the amp doesn't get hot and start damaging its self and things around.. An Effiecently running amp will be realtively cool ... If after you read my answer you say hey no. I have good 1/0 and a great high output alternator and
Good high quality batteries then it could just be a defective amp... Power in car audio is like this in order to run bigger systems you have to have an abundance of power available if it's not available it becomes heat which can cause problems in your alternator.. Or components of your stereo. Or if the cable is not the proper size or quality it will cause resistance as I mentioned earlier. Which will become heat.
Reply · Report · T-Top on Mar 14, 2015
· Add Answer · I Have This Question Too (0)
1.can i put 2 pioneer ts-w3003d4 on hifonics BRX2400.1D, and which is the best two subwoofers for this amp?
2. can i put 2 pioneer ts-w3003d4 on NVX JAD1200.1 amp?
thank you
megamike on Feb 11, 2015
Hifonics BRX2400.1D
Hifonics BRX2400.1D
Pioneer TS-W3003D4
Pioneer TS-W3003D4
Best Answer: The brz 2400 is to powerful for the subs your looking at, the subs are 600watts rms each that's 1200watts rms total. the brz2400.1 is 2400rms rms. That's 2times the amount the subs need to move. Your looking for a 1200.1 amp. Your subs wire 1ohm or 4ohm. If you wire the subs to 1ohm and get a 1200.1(RMS) amp you'll be fine. Or if you wire the subs to 4ohm and get the brz2400.1 you'll be fine. (The second option is a waste of money).
Reply · Report · Robert c on Feb 11, 2015
· Add Answer · I Have This Question Too (0)
Can someone tell me if this amp is good or bad for 2 12 kicker L7 4ohm each!??
I'm new to this lol!
A shopper on Mar 20, 2015
Best Answer: Hello,

Welcome to Car Audio. First, it is always important to provide MODEL NUMBERS, NOT descriptions. Here it isn't such a big deal, but there is no such thing as a "12 kicker L7 4ohm" ; there is , however, a DUAL-4ohm . Moreover, you are likely referring to the Kicker Solo-Baric 11S12L74 (S12L74) (or maybe the 08 version, but that doesn't matter much either) . Nevertheless, model numbers are important, because they give absolute Facts, where descriptions give assumptions.

To your question, the Hifonics BRX2400.1D is WAY more amp than you need. Two Kicker 11S12L74 are only asking for ~1500w RMS @1ohm , when wired in parallel. The Hifonics will give you 2400w RMS @1ohm. So instead, consider the Hifonics BRX1516.1D, because it gives you the perfect match.
Reply · Report · Customer SStaff on Mar 21, 2015
· Add Answer · I Have This Question Too (0)
which the best amp for 2 pioneer ts-w3003d4, i am thinking of NVX Jad1200, Hifonics BRX 2400 and sound stream TA1.2000D?
megamike on Feb 13, 2015
Hifonics BRX2400.1D
Hifonics BRX2400.1D
Soundstream TA1.2000D
Soundstream TA1.2000D
Best Answer: hi there, im lee from united kingdom, I recently purchased a this soundstream amp ta1.2000d to power my 2 pioneer tsw 3002d4's 1000w rms spl subs, this amp kicks , sound quality is superb for a class d, its power hungary so make sure you run 0 gauge ofc or cca to it, but the inputs for power nd ground on the amp are very small,i had to buy knukonceptz 0 to 4 gauge reducers so I could give the amp more current but I even had to grind the reducers down a bit for them to fit.....I have a 150amp stock altenator with a optima yellow top battery running all knukonceptz 0 gauge ofc wire and it hits hard, I would defo recommend this amp for these subs,its sleak looking and does the job.if you can supply it with a good electrical system it WILL deliver.be carefull on the gains it can distort your subs.i also upgraded my wire to the subs too. hope this helped you out a bit.
Reply · Report · lee c on Feb 13, 2015
· Add Answer · I Have This Question Too (0)
Where can I buy a bass knob for a Brx 2400.1 Brutus amp?
Raul M on May 4, 2016
· Add Answer · I Have This Question Too (0)
i have a 4 channel amp along with this brx 2400.1d my question is do i need to run a separate wire for each amp since the brx2400.1d needs a 0 gauge wire and my 4 channel takes max 4 gauge?
pollo on Apr 19, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

BRX2400.1D

UPC

806576220701

Weight

18.00lbs

Internal SKU

ls-brx24001d-obi257085

Internal Product ID

119831

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Hifonics Brutus BRX2400.1D