Expert Service 1-661-257-9993 [Hours]

PowerBass PS-69 LIKE NEW DAMAGED PACKAGING

240W Peak Dual Cone 6x9" Full Range Car Speakers - Pair

We apologize

This item has been discontinued

Item Added to Cart

PowerBass PS-69 LIKE NEW DAMAGED PACKAGING

240W Peak Dual Cone 6x9" Full Range Car Speakers - Pair

$19.99

Keep Shopping

Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

You need speaker wire to connect your speakers!

$29.99

Add
Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add
NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

$12.99

Add

Don't see the accessory you're looking for?
View all available accessories for the PowerBass PS-69 LIKE NEW DAMAGED PACKAGING.

Get FAST answers from customers ASK a Question See questions answers

BeltrPowerBass onics Store

Item Condition: Like New

  • Like new Damaged Package:
    • General Features:

      • 6x9" PS Series Full Range Dual Cone Car Speakers
      • Power Handling:
        • Peak: 240 watts per pair / 120 watts each
        • RMS: 80 watts per pair / 40 watts each
      • Polypropylene Treated Cone
      • Double Pressed Treated Foam Surround
      • Whizzer Cone Tweeter
      • Painted Steel Basket
      • 11.4oz. TYPE magnet motor structure
      • Top-mount Depth: 3.1"
      • 4 ohm impedance
      • Frequency Response: 50-20,000 Hz
      • Sensitivity: 90dB
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

      • Priced Per Pair

      Check out the PS-69 Owner's Manual

    Speaker Specifications

    Series
    This is the manufacturer product line of speakers.
    PS Series
    Priced Per
    Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
    Pair
    Speaker Size
    Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
    6" x 9"
    Tweeter Design
    Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
    Cone
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Polypropylene
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Double Pressed Treated Foam
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    120 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    40 watts
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    90 dB
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    50 - 20000 Hz
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    3.1"
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
    Number of Speakers
    This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

    Please refer to the product image and description for further details about the speaker.

    2

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

    You need speaker wire to connect your speakers!

    Your Price $29.99

    Belva 23 ft. of True Spec 16 Gauge Speaker Wire

    100% Copper Clad Aluminum, PVC blended jacket for easy installation and high strand count for maximum audio quality

    Your Price $12.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    NVX XTGSP2 Tone Generator and Speaker Polarity Tester

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Belva Five Piece Installer's Panel Removal Tool Kit

    Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

    Your Price $11.99

    Universal Wire Puller & Grabber

    Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

    Your Price $7.99

    Encore Universal Four Door Power Door Lock Kit

    Add Power Door Locking and Unlocking while you have the Door Panels removed

    Your Price $29.99

    NVX SDSK2 Speaker Kit

    Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

    Your Price $12.99

    Stinger Roadkill Speaker Kit

    Use this to eliminate rattle from your speakers!

    Your Price $10.99

    NVX Sound Dampening Rubber Roller

    Install your Sound Dampening with ease using this heavy duty rubber roller!

    Your Price $7.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-PS-69-LNDP

    UPC

    823871006236

    Weight

    6.40lbs

    Internal SKU

    LS-ps69-LNDP

    Internal Product ID

    120363

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: PowerBass PS-69 LIKE NEW DAMAGED PACKAGING