Expert Service 1-661-257-9993 [Hours]

Belva BPKG110v2 LIKE NEW DAMAGED PACKAGING

500W Complete Bass Package with 10" Sub in Ported Box, Monoblock Amplifier and Amp Kit (BPKG110 v2)

We apologize

This item has been discontinued

Item Added to Cart

Belva BPKG110v2 LIKE NEW DAMAGED PACKAGING

500W Complete Bass Package with 10" Sub in Ported Box, Monoblock Amplifier and Amp Kit (BPKG110 v2)

$99.99

Keep Shopping

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$53.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Belva BPKG110v2 LIKE NEW DAMAGED PACKAGING.

Get FAST answers from customers ASK a Question See questions answers

Belva Store

Belva Slappin' Bass Packs

The newest addition to the Belva line-up is an entire series of complete bass packages! These loaded enclosures also include an amplifier, and wiring to make sure you’re supplied with everything you need to add bass to your vehicle. Belva added these loaded ported enclosures to their line-up in an attempt to revitalize the car audio industry with quality bass at an affordable price, and making the process easier than ever before.

As soon as you receive your new bass package, installation is a 4-step process. First – make power connections. Second – make signal connections. Third – connect subs. Fourth – tune the amplifier and enjoy your new bass system. Installation of a subwoofer package has never been so easy!

The wiring included with the package is completely true to gauge so the amplifier can perform at its very best. The quality of the wiring is very high for such an affordable kit. The subwoofers are also loaded into a ported enclosure. These ported enclosures allow for the system to be much more efficient - giving you more bass output per watt.

Not only is the installation easy, but the value of quality bass per dollar is second to none. These systems are one of the most amazing deals we’ve ever been able to offer at SonicElectronix.com. This BPKG110 includes a 10” subwoofer enclosed in a ported box, a monoblock amplifier to drive it, and a complete 8 gauge amplifier kit to wire the system up. A remote bass knob & high level inputs are included for compatibility with any system - and remote bass adjustments allow you to tune the bass to your liking on the fly. Adding 500 watts of gut wrenching bass has never been easier.



Item Condition: Like New

  • Like new Damaged Package:
    • Subwoofer Features:

      • 10" Belva Subwoofer
      • Power Handling:
        • Peak: 500 watts
      • Impedance: 2 ohm SVC
      • Polypropylene cone
      • Durable rubber surround
      • 1.5" black aluminum voice coil
      • 37 oz. ferrite magnet motor structure
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

      Amplifier Features:

      • Class A/B Monoblock Amp
      • Adjustable gain
      • LPF: 40-300Hz
      • Bass Boost: +0-12DB
      • One pair of preamp outputs
      • High level/speaker level inputs
      • Remote bass knob included
      • 25A fuse

      Enclosure Features:

      • 10" Ported Subwoofer Enclosure
      • Preloaded with Belva subwoofer
      • Tuned perfectly to get the best bass from the Belva sub
      • Dimensions: 14.6" W x 11.81" H x 5.12" Top Depth x 9.45"Base Depth

      Amp Kit Specifications

      • Complete 8 Gauge Amp Kit with 2-Channel RCA Cable
      • High strand count for maximum flexibility
        • 17ft. frosted red 8 gauge power wire
        • 3ft. frosted black 8 gauge ground wire
        • 17ft. gray remote turn-on wire
        • 17ft. 2-channel twisted-pair noise rejecting RCA cable
        • 10ft. frosted red speaker wire
        • Nickel plated die-cast zinc Mini-ANL fuse holder
        • 40A mini-ANL fuse
        • (2) 8 Gauge Nickel plated brass ring terminals
        • (5) 14-16 Gauge Nickel plated brass spade terminals
        • 8 Gauge grommet
        • Miscellaneous connectors, terminals and wire ties

    Amplifier Specifications

    Amplifier Class

    An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

    Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

    Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

    Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

    AB
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    Yes
    Preamp Outputs
    Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
    1 pair
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    Low-Pass Crossover Frequency
    The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    40 - 300 Hz
    Bass Boost
    The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
    0 - 12 dB
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    Yes
    Fuse Rating
    The amperage and the number of fuse(s) an amp requires.
    25A x 1 

    Subwoofer Specifications

    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    10"
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    2 ohms
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    250 watts
    Total RMS Power Handling
    This is the total RMS power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
    250 watts
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    500 watts
    Total Peak Power Handling
    This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
    500 watts
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Rubber
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Polypropylene
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle

    Enclosure Specifications

    Box Type
    Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

    Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

    Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

    Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
    Vented / Ported
    Number of Subs/Speakers
    This value represents the number of speakers or subwoofers that the enclosure accommodates.
    1
    Box Style/Shape
    The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
    Hatchback Style, Angled Back
    Height
    The height of the item, measured from top to bottom, in inches.
    11.81"
    Width
    The width of the item from left to right (side-to-side) measured in inches.
    14.6"
    Depth
    The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
    5.12"
    Second Depth
    The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
    9.45"
    Box Exterior Color
    The color of the enclosure's exterior/outer finish.
    Black

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX SDTK20

    Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

    Your Price $53.99

    Dynamat Xtreme 20' Trunk Kit 19405

    20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

    Your Price $87.63

    Boom Mat Damping Material (050210)

    20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

    Your Price $109.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-BPKG110v2-LNDP

    UPC

    818060013928

    Weight

    26.30lbs

    Internal SKU

    LS-bpkg110v2-LNDP

    Internal Product ID

    123105

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Belva BPKG110v2 LIKE NEW DAMAGED PACKAGING