Expert Service 1-661-257-9993 [Hours]

Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING

2700W 12" MOFO Series Dual 2 ohm Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING

2700W 12" MOFO Series Dual 2 ohm Subwoofer

$114.99

Keep Shopping

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

$37.85

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING.

Get FAST answers from customers ASK a Question See questions answers

Power Acoustik Audio Store

Power Acoustik MOFO-122X 12" Subwoofer

When technology advances, products do as well. Does Lamborghini need to refine their cars every 2 years? NO, they do because they can. After 6 years, it is time for a change. Say "See Ya!" to the old MOFO, and welcome the new MOFO-X subwoofers! The new motor is refined and increases efficiency dramatically! MOFO-X subs use a non-pressed pulp cone for durability and smooth low bass. Like the original MOFOs, the new models use an aluminum dustcap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone and eliminate cone flex during high excursion. Since the cap is aluminum and coupled to the coil former, it acts as a heat sink or heat extractor. Using the latest materials, the new MOFO-X subs yield superior performance!

Enclosure Recommendations

All enclosures should be made of .75" (3/4") material only. When possible, make the baffle 1.5" (1-1/2") thick and add .75" (3/4") to the depth of the enclosure to compensate. All volumes INCLUDE vent/port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out enclosure reflections.

Item Condition: Like New

  • Like new Damaged Package:
    • General Features

      • 12" Dual 2 ohm Subwoofer
      • Power Handling:
        • Peak: 2700 watts
        • RMS: 1500 watts
      • Recommended power range: 1000 - 1500 watts RMS
      • Impedance: Dual 2 Ohm
      • Cloth and paper composite cone woofer
      • UV Coated foam surround
      • Blue cast aluminum basket
      • Chrome back plate
      • Dual conex spiders
      • Nickel plated compression wire terminal
      • Large 340 oz. magnet structure
      • Recone kit Power Acoustik MOFO-122X-RC
      • Authorized Internet Dealer
      • 1-year Manufacturer's warranty

    Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    MOFO (Power Acoustik)
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    12"
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    2700 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    1500 watts
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Dual
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    2 ohms
    Voice Coil Diameter
    Diameter of voice coil, usually measured in inches.
    2.5"
    Xmax (millimeters)
    Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
    23 mm
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle
    Main Cone Color
    This is the color of the speaker's or subwoofer's cone.
    Black
    Blue
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Cloth Laminated Paper
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Foam
    Subwoofer Grille
    Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
    No
    Re-Cone Kit Available
    Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
    No

    Recommended Enclosure Specifications

    Recommended Enclosure Type
    This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

    Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

    Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

    Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

    Ported / Vented
    Sealed
    Minimum Sealed Box Volume
    This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    1.50 cubic feet
    Maximum Sealed Box Volume
    This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    1.50 cubic feet
    Minimum Ported Box Volume
    This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    2.0 cubic feet
    Maximum Ported Box Volume
    This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    2.0 cubic feet
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    6-1/2"
    Cutout Diameter
    The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
    11-1/4"
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    25 ft. of Streetwires 12 Gauge Speaker Cable

    You'll need speaker wire to hook up that new subwoofer!

    Your Price $37.85

    Belva 23 ft. of 12 Gauge Speaker Wire

    Ultra-flexible PVC blended jacket for easy installation.

    Your Price $14.99

    20 Square Feet of Sound Dampening Material

    NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

    Your Price $53.99

    Stinger Sound Dampening Trunk Kit

    Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

    Your Price $64.99

    Dynamat Sound Dampening Trunk Kit

    Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

    Your Price $87.63

    2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Universal rubber roller to make it easy to install sound dampening.

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    Cordless Multi-Functional Heat Tool Soldering Iron Kit

    Continuous working lock allows you to work without holding down trigger.

    Your Price $74.99

    12 oz. Can of Adhesive Spray

    Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

    Your Price $8.99

    Gold Plated Dual Terminal Banana Plug Connector

    Enables an expandable, secure connection accepting up to 8 gauge wire.

    Your Price $1.99

    Scosche SPL Meter

    Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

    Your Price $21.99

    1 Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING Subwoofer

    Mono Amp

    Mono Amp - Option 1

    2 Channel Amp - Bridged

    2 Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING Subwoofers

    Mono Amp

    2 Channel Amp

    4 Channel Amp - Bridged

    3 Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING Subwoofers

    Mono Amp

    Mono Amp - Option 1

    4 Channel Amp

    4 Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING Subwoofers

    2 Channel Amp

    4 Channel Amp

    Browse 15 questions and 81 answers
    Hide answersShow all answers | Sort by
    Why did you choose this?
    Sonic Electronix Store
    Hella sub for the $
    Nicholas G on Nov 26, 2016
    good question i love bass
    Thomas H on Jun 1, 2016
    A buddy of mine has power acoustik and i was in his car and it blew me away.
    Ben P on Jun 10, 2016
    Purchase because of it's power rating. And sound quality. Had these over a year now; lows really sound good.
    Arthur H on Jan 24, 2016
    I have two mofo 12 2ohm will this amp work?
    Harold c on Aug 26, 2015
    Power Acoustik MOFO-122X
    Power Acoustik MOFO-122X
    NVX JAD1200.1
    NVX JAD1200.1
    Best Answer: Simply, yes it will work. However, the RMS rating for the subs is 1500 watts and at a one ohm load the amp will only put out 1200 watts. For dual two ohm subs you can wire them for a load of 2 ohms or 8 ohms. Neither of which will place the amp in a good position to achieve its full potential. If you wire the subs for 2 ohm load then the amp will only be able to push around 800 watts; that is not close at all to the potential of the subs ability. So, to answer your question, yes it will work, but you will not get the amps full ability.
    Reply · Report · Joshua P on Aug 27, 2015
    · Add Answer · I Have This Question Too (4)
    hi......i have Planet Audio AC4000.1D ANARCHY 4000-watts Monoblock Class D 1 Channel 1 Ohm Stable Amplifier and Power Acoustik MOFO-122X 12-Inch Competition Subwoofer Dual 2-Ohm Voice Coils.Can I put the IPUT LEVEL Amplifier on max??? or will burn the subwoofer????
    A shopper on Nov 15, 2014
    Best Answer: gains are not a volume control. you can find alot of things on the net as to how to set your gains correctly to keep from frying amp/sub or both. your headunit has preouts those preouts have a voltage set your amp to the preout voltage to atleast get a base to start from so as to not fry something. exmpl i have 4vlt preouts on my pioneer and have my pioneer amp set at 4vlts on the gain. im only giving my mofo 1000 max at 1ohm right now but it gets down low and loud even though my enclosure is a prefab and underspec. new enclosure drying now.
    Reply · Report · Ron M on Nov 15, 2014
    · Add Answer · I Have This Question Too (1)
    What would be the best amplifier to use with 2 of these subwoofers?
    A shopper on Jan 6, 2015
    Best Answer: A mono block that puts out 2000 watts rms should do them justice they are over rated and can say comfortably that they are under or around 1000 watts rms a piece. That should be nice and they sound really good in custom boxes. You want 3 cubic feet per sub for max output
    Reply · Report · james m on Jan 6, 2015
    · Add Answer · I Have This Question Too (1)
    hello!!! 1) if the Power Acoustik MOFO-122X 12-Inch 2 ohm wired to 1 ohm,will burn the subwoofer???? and 2) if i put 2 mofos 2 ohms the Planet Audio AC4000.1D is it strong???
    sw8gtk on Dec 3, 2014
    Power Acoustik MOFO-122X
    Power Acoustik MOFO-122X
    Planet Audio AC4000.1D
    Planet Audio AC4000.1D
    Best Answer: Hello Timos, This subwoofer is a Dual 2 ohm, its important that you address is properly to avoid confusion. It does have the ability to be wired down to 1ohm, but this will NOT 'burn the subwoofer'. The impedance of a subwoofer is never the factor that "burn" it out, its often an improper setup that does that. If you want the figures to match with the AC4000.1D, then you want to consider the Power Acoustik MOFO-124X instead. Two Dual-4ohm subwoofers wired in parallel will give you a 1ohm final load.
    Power Acoustik MOFO-124X
    Power Acoustik MOFO-124X
    Reply · Report · Customer SStaff on Dec 6, 2014
    · Add Answer · I Have This Question Too (1)
    the low pass freq from Planet Audio AC4000.1D on how hz should be?? and the subsonic filter???
    sw8gtk on Nov 23, 2014
    Power Acoustik MOFO-122X
    Power Acoustik MOFO-122X
    Planet Audio AC4000.1D
    Planet Audio AC4000.1D
    Best Answer: Hello Timos,

    There isn't a 'Right' answer to your question. Especially true, "quarter of the way" is NOT A PROPER setting.
    *The Low Pass Filter [LPF] is the crossover setting that will cutoff/roll-off Frequencies ABOVE where you set it. For example, if you set it at ~120hz, then the amp will only allow the frequencies BELOW 120hz to play through. This is solely YOUR preference, but being a 12" Subwoofer 80hz-120hz is a common setting, however.
    *The Subsonic Filter does the Opposite of this. So, if you set it at 40hz, then the amp will only play Frequencies ABOVE that. You often set this to what the enclosure is tuned to, because the enclosure - in theory - will cut off all frequencies Below that tune. ~35hz-40hz is the common setting.

    For this example, if we set the amp the way I've explained, the the amp will play a solid range of 40hz-120hz , which is where the Bass is.
    Reply · Report · Customer SStaff on Nov 24, 2014
    · Add Answer · I Have This Question Too (1)
    Good morning and Merry Christmas!!!!hi......i have Planet Audio AC4000.1D ANARCHY 4000-watts Monoblock Class D 1 Channel 1 Ohm Stable Amplifier and 2 Power Acoustik MOFO-122X 12-Inch.with calculate the my voltage it s 63,2 but the gains from amp counts up 53,1 and the gain on max!!!! I need Planet Audio AC5000.1D????Can you help me please????
    sw8gtk on Dec 24, 2014
    Power Acoustik MOFO-122X
    Power Acoustik MOFO-122X
    Planet Audio AC4000.1D
    Planet Audio AC4000.1D
    · Add Answer · I Have This Question Too (1)
    i'm trying to decide if i should buy 2 of this or a orion hcca 122x what would be louder on the trunk of my car?
    mayitodmngz m on Sep 30, 2014
    Best Answer: Both speakers are great of course the orions are the loudest but in my opinion the Power Acoustik mofos are right up there with them which speaker I would choose I would go based on how much amp power lm using the rms for the Power Acoustik is 1500 watts a peace the rms for Orion 2000 or more Power Acoustik you can't beat the value for the money and like orion thay can take abeating
    Reply · Report · Calvin L on Oct 2, 2014
    · Add Answer · I Have This Question Too (0)
    Will this amp move 2 mofo 12 2ohm?
    A shopper on Aug 27, 2015
    Power Acoustik MOFO-122X
    Power Acoustik MOFO-122X
    NVX JAD1200.1
    NVX JAD1200.1
    Best Answer: Hello. Definitely not support your subwoofers .. You can use the amplifinder , it will help you a lot . And always give preference to amplifiers with CEA certificate. Good luck.
    Reply · Report · Marcelo C on Aug 28, 2015
    · Add Answer · I Have This Question Too (0)
    I have the 2 MOFO 122X what is the best enclosure ?
    Rickey B on Jun 24, 2015
    Best Answer: I had to build my own out of 1" sub flooring. The four others I tried that were 3/4" blew apart in about 11 days. Had this one four a few months. I glued, screwed, and fiberglassed all the seams and corners probably overkill but was tierd of being somewhere putting down jl audio's and the box blow out. The correct watts and tuning these things are bad ass. Hope this helps
    Reply (1) · Report · William P on Jun 24, 2015
    · Add Answer · I Have This Question Too (0)
    I have a Hifonics BRX 1200.1 mono block amp and a 2.0 cf slot ported box tuned @ 32 htz with a Hifonics OLM 800 D2 I originally wired it to 1olm to get 1200 watts and my sub couldn't handle it. So I wired it to 4 olm @ 450 watts and it sounds much better. But it still doesn't hit hard enough to satisfy my need for really hard hitting bass. Would the dual 2 olm MoFo handle the 1 olm 1200 watts and hit 2 or more times harder than my current sub or should I just go dual 4 olm and get 2 Mofo124's with a dual 12 box?
    rokstar on Mar 19, 2015
    Best Answer: If you are only running one mofo that is fine and will handle the 1ohm stable if wired parallel but that amp is a lil small the mod I rms watts is 1500 and max is 2700. So it will run 1 mofo 122x but be a lol under powered.
    Reply · Report · ben h on Mar 19, 2015
    · Add Answer · I Have This Question Too (0)
    I've got a 2400 watt max Kicker amp and thinking of buying this sub.... is this a good choice or should i look elsewhere?
    jake n on Apr 21, 2015
    Best Answer: Hello Jake,

    We may need to remove your question because it is a bit too vague for us to feel comfortable enough to leave it up. You've only provided a description of your amplifier, instead of a proper Model Number, so all answers you receive will Only be guesses. Kicker often does Not rate their amplifiers with "Max" figures, instead of RMS figures, but there was a time they did. Assuming it Is a "Max" figure, then the amp is likely doing 1200W RMS at its lowest impedance. This is where the problem is, we have no idea what amplifier you are referring to, so we can't guess beyond this. For future inquiries, please make sure to provide a model number, not a description.
    Reply · Report · Rick MStaff on Apr 22, 2015
    · Add Answer · I Have This Question Too (0)
    what box is recommended for this?
    anthony on Nov 29, 2015
    Best Answer: I bought this from amazon and it works great depending on trunk space try the smaller version.Qpower Dual 12" Woofer Box "Q Bomb" - QBOMB12V
    Reply · Report · jimmie s on Nov 29, 2015
    · Add Answer · I Have This Question Too (0)
    I have two of these hooked up to a 6,000 way spl ape class d mono amp at two ohms. Cea tested runs 2500 watts at 2 ohms and 14.4 volts. My box is only 1.85 cu ft and sub recommends 2 cu ft. It's a slot ported box port is only 12 inch by 1.5 inch. Tuned at 37 hrtz. Should I reverse Mount them to maximize box box space. Also have poly fill to trick su s into thinking they are in a bigger box and I still don't think I'm getting the soound I should from these. Or should I just get a bigger box?
    A shopper on Feb 28, 2015
    Best Answer: Reverse mount to me is silly. Its all about showing your magnet off. So unless you are going for show car applications just match the box size as close as possible. If you are listening to hip hop then your port needs to be perfect. If your listening to dub step or things with lower tones even Metal having nice drum hits. Then ported box wont cut it. You will sound better with a sealed box as long as you have the rihgt RMS going to your sub.... I know i blew this sub with a lanzar amp only giving it 1000 watts rms with a ported box. it did sound alright until it blew. But for the magnet size and weight to me its a underperformed speaker. My MOFO could not handle the ported box for more then a week. its little bit more but Im running an orion H2 12 inch with an older PPI amp at 1 ohms 1200 watts and its like night and day between that set up
    Reply · Report · David P on Mar 9, 2015
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    MOFO-122X

    UPC

    709483032095

    Weight

    28.50lbs

    Internal SKU

    LS-mofo122x-LNDP

    Internal Product ID

    123575

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Power Acoustik MOFO-122X LIKE NEW DAMAGED PACKAGING