Expert Service 1-661-257-9993 [Hours]

Hifonics Brutus BRX2000.1D

2000 Watt RMS Brutus Series NextGen Class D 1-Ohm Stable Monoblock Subwoofer Amplifier - (Brutus 2000 Watt)

Out of Stock - Backorder
|

Thanks , You Pay:

$149.99

with warranty

+ FREE Shipping in US 48

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • Brutus Series Monoblock Class NextGen Super-D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 700 watts x 1 chan.
    • 2 ohms: 1400 watts x 1 chan.
    • 1 ohm: 2000 watts x 1 chan.
  • Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality
  • Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
  • Lighted connectors and blue wash of light from the underside of the heatsink
  • LED power (green) and protect (red) indicators
  • Wired remote bass level control included
  • Built-in system diagnostics
  • 1-Ohm Stable operation
  • 10 AWG speaker output connections
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Full-range Preamp RCA outputs to daisy chain multiple amps
    Full-range only if a full range signal is connected to input
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Master/Slave Mode with Output/Input Switch and Dedicated RCA connections
  • Input sensitivity: 200mV - 9V
  • Variable low-pass filter: 35 - 250 Hz
  • Variable sub-sonic filter: 15 - 35 Hz
  • Variable Bass Boost (Bass EQ): 0 - +10 dB at 45Hz
  • Frequency response: 10 - 250 Hz
  • Damping factor: >200
  • Signal-to-noise Ratio: >95dB
  • Total harmonic distortion: 0.10%
  • Recommended Fuse Rating: 200A x 1 (Not Included)
  • CEA-2006 compliant amplifier
    Confirmed by Manufacturer
  • Dimensions: 16-11/16"L x 10-5/16"W x 2-1/2"H
  • 2-4 gauge OFC power and ground wiring is highly recommended for installation, if running amplifier at 2ohms or 1ohm. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 90 Day Manufacturer's Warranty
Recommended Accessories:
  • XS Power XP750-CK:
    • The XS Power XP750-CK is designed for the enthusiast that needs a proper power reserve, that cannot be had with a capacitor. It is intended for 1000-1500 Watt Audio Systems. We are well aware that the Hifonics BRX2000.1D is capable of up to 2000 watts of Dynamic Power, but unless you are competing Every day of your amplifier's life then you likely are only using ~half that power at any given time.
  • Big 3 Upgrade Kits:
    • To get the most out of your new power system check out our Big Three Upgrade Kits. Performing the "Big 3" upgrade to your vehicle will improve the performance of your electrical system and increase its current handling capabilities. This decrease in resistance will reduce light dimming, reduce voltage drops, stabilize voltage and current flow, and decrease the strain being put on your vehicle’s electrical charging system.

Check out the Hifonics BRX2000.1D Owner's Manual



Specifications

Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Height
The height of the item, measured from top to bottom, in inches.
Width
The width of the item from left to right (side-to-side) measured in inches.
Color
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Browse 21 questions and 123 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Good reviews review, the power I need, relatively cheap, aesthetically pleasing :)
Sir Gabriel H on Dec 2, 2016
Had one before, very good amp
Mark G on Nov 29, 2016
Good solid amplifier at a great price.hifonics is one of the original old school designs and for being a Chinese amp it's about the best non competition Chinese amps out there. Put that with Sonics prices and selection you can't beat it plus got a flash sale discount to boot it's a win-win
charles "chip" c on Nov 30, 2016
its the right amp for my subs
jaron b on Nov 28, 2016
will this be a good fit to power 1 rockford fosgate p3 12?
A shopper on Mar 12, 2015
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Rockford Fosgate P3D4-12
Rockford Fosgate P3D4-12
Best Answer: Hello,

No. The amp is far too much power (1400w RMS @ 2ohms) . The better match would be the Rockford Fosgate P3D2-12 wired up to 4ohms.
Reply · Report · Customer SStaff on Mar 12, 2015
· Add Answer · I Have This Question Too (2)
Will this amp be ok powering dual 12in kicker compRs? The subs are rated at 1600 watts rms @ 2 ohms and are in a ported box. I know clipping can be caused by under powering a sub, but does 200 watts really matter?
Liam V on Dec 6, 2014
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Kicker 40DCWR122
Kicker 40DCWR122
Best Answer: Hello Liam,

In THIS particular case, the ~200w difference is Not a bit concern. However, it is VERY important that you do not push the system beyond its limits. THAT is where "underpowering" is a problem. You risk SENDING a clipping signal if you overdrive the amp and/or do not have tuned properly. Setting the Gain "Half Way" is not a proper setting, so please do your homework on this or have a professional tune the amp.
Reply (1) · Report · Customer SStaff on Dec 7, 2014
· Add Answer · I Have This Question Too (1)
will this amp handle straight 0 gauge wire to the postive/ground?
A shopper on Aug 25, 2014
Best Answer: Hello,It really depends on the manufacture of the wiring you are referring to. MOST "premium" manufactures' 0 Gauge wire [i.e. Kicker, NVX, etc..] may not fit well without shaving away some wiring. This , of course, isn't ideal because you want as many strands as possible. So, most of our customers include a pair of Stinger SPT521 1/0 Gauge Input to 4 Gauge Pin Adapter.

http://www.sonicelectronix.com/item_46119_Stinger-SPT521-Chrome.html
Reply · Report · Customer SStaff on Aug 25, 2014
· Add Answer · I Have This Question Too (0)
Which gauge wire kit should be used for this amp as well as which gauge speaker wire should be used for SWR 12d2 subs?
Robert Tyne M on Oct 22, 2015
Best Answer: I use 0 gauge with a 1/0 to 4 gauge step down adapter to fit into the amp. May be a bit overkill but I'd rather be on the safe side. I use 12 gauge speaker wire, ended up blowing a hole through the cone of one of my alpine 12d4s the other day from the power I was getting paired with a d5100 battery and 125 amp altetnator
Reply · Report · Brady N on Oct 27, 2015
· Add Answer · I Have This Question Too (0)
This will be a mouthful...
I currently have 4 gauge wire (CCA) and its true 4 gauge; I have two running from the battery to a distribution block. Each wire is fused with a 60Amp AGU fuse about a foot away max from the battery. I read reviews saying this amp requires a lot of power therefore I was wondering if I will be fine just combing two of the 4 gauge power wire from the distribution block with a 0000 gauge connector and having the other end have about 5-6 inches of wire (0-4 gauge OFC) to the amp (I just assumed that's not a good idea given shifts in current flow however, my optimistic mindset got the best of me) . I plan on upgrading to 0 gauge (CCA) wire however for the time being is this fine or should I just run one 4 gauge wire to the amp; or should I just wait for my cable upgrade (which will be 3 weeks after amp arrives...)? I will be powering two Alpine Type Rs SWR T12 subs at 2 ohms. (The BRX2000.1d will be the only amp connected to the car everything is stock on the vehicle and the battery is in the trunk so power wire is shorter in length if that helps.
A shopper on Sep 4, 2014
Best Answer: That's kind of funny u said 4ga. I did it at first trying to save alittle money & I burnt my true 4ga. After a few weeks, so I now have a true 1/0ga. & let me tell u, u can tell the difference big time! This amp is a monster I have it running 2-12" NVX VCW's D4's at 1ohm in a 1.8 cubic ft ported box tuned @ 34 hz & it is SUPER SUPER LOUD! Everyone thinks I have 15's or even 18's, I also have the matching 4 Channel the BRX640.4 running a pr. NVX 6x9's & a pr.NVX 6.5's & it is crystal clear! Don't waste your time with a 4ga. U will be disappointed n the end just do right the first time TRUST ME, these are some [email protected] amps!! Any more questions let me know, been installing for 20+yrs, also Sonic is the way to go... Hope this helps...
Reply · Report · Dwan R on Sep 4, 2014
· Add Answer · I Have This Question Too (0)
Can this be ran at 1 ohm all the time?
Nick S on Aug 18, 2014
Best Answer: Hello Michael,

As our customer's have pointed out, YES. The BRX2000.1D Give you a 1ohm RMS Rating, implying it is Stable at the final load. PLEASE MAKE SURE you wire your subs properly!!
Reply · Report · Customer SStaff on Aug 19, 2014
· Add Answer · I Have This Question Too (0)
I have a 4 gauge amp kit installed from a previous set up, everyone tells me it's in my best interest to upgrade it to 1/0 gauge. Is the difference just the power and ground wires or do I need to replace the entire kit?
Robert C on Oct 27, 2014
Hifonics BRX2000.1D
Hifonics BRX2000.1D
American Accessories 10-GAUGE-AMP-KIT
American Accessories 10-GAUGE-AMP-KIT
Best Answer: Just the power and ground wire. I'm using kicker 4 gauge power wire and ground wire with my BRX2000.1D and it works great but it's thick and high quality wire. If your using cheap wire you might need 0 gauge or go with kicker 4 gauge it's amazing wire and very flexible.
Reply · Report · Richard R on Oct 27, 2014
· Add Answer · I Have This Question Too (0)
I am running this amp to power 2 Sundown Sa-12's. My question is, what size inline fuse do I need to run from the battery to the capacitor? Thank you.
Frankie M on Feb 3, 2015
Best Answer: Hello Frankie,

For future inquiries, it is wise to provide proper model numbers, instead of a description like "2 Sundown Sa-12's" . We assume you are referring to the SA-12 D2, because it makes the most sense, but if its the other configuration then that may dramatically change the responses from people. Assuming the SA12 D2 wired in Series/Parallel, then we also suggest a 200A Fuse.
Reply · Report · Customer SStaff on Feb 3, 2015
· Add Answer · I Have This Question Too (0)
Will this amp be enough to power two Alpine SWR-12d4? Or am I better off getting the SWR-12d2 and getting the Belva BB5000D amplifier?
Nash P on Dec 20, 2014
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Alpine SWR-12D2
Alpine SWR-12D2
Belva BB5000D
Belva BB5000D
Alpine SWR-12D4-OB
Alpine SWR-12D4-OB
Best Answer: Also, with the car revving thing the guy said above, it's not like that, that be like, I could set the max to 8,000 rpm to get maximum power when I need it, or I could set a governor at 6,000 so I'll never really be able to use the full potential. Just because you wire it to be able to push a 1,000 watts each, doesn't mean you're driving around with the stereo cranked. Which is just a bad idea. The belva is probably overrated anyway
Reply · Report · Deon M on Dec 26, 2014
· Add Answer · I Have This Question Too (0)
Is this amp a good match for 4 Rockford p2d2 12s wired to 1 ohm?
Andrew S on Feb 4, 2016
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Rockford Fosgate P2D2-12
Rockford Fosgate P2D2-12
Best Answer: It will work but you will need zero gage wire and 2nd battery and possible update the alternator.
Reply · Report · Carlos M on Feb 4, 2016
· Add Answer · I Have This Question Too (0)
What is the fuse rating for this amp?
Desbee W on Dec 3, 2014
Best Answer: It has (2) 100 amp fuses
Reply · Report · Michael S on Dec 3, 2014
· Add Answer · I Have This Question Too (0)
Can I connect my 4 car speakers and 2 subwoofers to this amp?
Lorenzo F on Nov 25, 2015
Best Answer: Hi Lorenzo,

Absolutely not. The Hifonics BRX2000.1D is intended to drive subwoofers Only. The number of subwoofers is unlimited, but that does NOT include full-range speakers. We suggest a 5-Channel amplifier, these types of amplifiers are intended for exactly what you wish to do. Give our sales team a call to help you match one with the equipment you already have.
Reply · Report · Rick MStaff on Nov 25, 2015
· Add Answer · I Have This Question Too (0)
I just purchased this am along with 2 alpine SWR 12d2 subs. what is the best way to set this combination up so as to not burn up the amp or blow the subs? (Looking to get most band for buck.)
Robert Tyne M on Oct 20, 2015
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Alpine SWR-1221D
Alpine SWR-1221D
Best Answer: Hello Robert,

Depending on your setup - specifically, what the enclosure gives you - there are two options to wiring up this setup. NEITHER is "better" than the other , NEITHER is going to give you the "most bang for your buck" and NEITHER is more "right" than the other. They are the exact same wiring configuration, just two different methods of getting the same results, 2ohms.

The easiest options is the following:
http://www.sonicelectronix.com/product/img/subwoofer_wiring/2_subs_DVC_2_ohm_mono.jpg

If you are able to perform this option, do it. It will avoid any further confusion. Keep in mind, the outputs on your amplifier are only there to make the installation easier; that Doesn't mean they ALL need to be taken up..which leads me to the next option:

This option if for If your box has two separate chambers and two separate terminals. PLEASE IGNOR THE NUMBERS IN THE PICTURE!!!! ESPECIALLY THE "4OHM" PART. The picture is just to show you the wiring, disregard the impedance.
http://www.sonicelectronix.com/product/img/subwoofer_wiring/2_subs_DVC_2_ohm_2ch.jpg

In the end, both of these options will provide a 2ohm final load at the amplifier, like the setup was intended.
Alpine BRX2400.1D_2-SWR-12D2
Alpine BRX2400.1D_2-SWR-12D2
Reply (1) · Report · Rick MStaff on Oct 21, 2015
· Add Answer · I Have This Question Too (0)
should i use the lowpass/high pass filters on this? the amps? or head unit?
A shopper on Mar 15, 2015
Hifonics BRX2000.1D
Hifonics BRX2000.1D
SoundStorm EV400.4
SoundStorm EV400.4
JVC KD-S35
JVC KD-S35
NVX XEQ7
NVX XEQ7
Best Answer: I have always used it on the amp. You could try the amp and set the head unit too? I am sure it couldn't hurt.
Reply · Report · Aaron F on Mar 15, 2015
· Add Answer · I Have This Question Too (0)
How would i wire the BRX2000.1D and massive audio summo 104 to 2ohms?
Michael B on Feb 2, 2015
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Massive Audio SUMMO 104
Massive Audio SUMMO 104
Best Answer: Hello Michael,

You simply wire the subwoofer in Parallel. The 'tentacle' configuration of the subwoofer does not change how you are meant to wire the setup. Bring the Positive (+) wires together, then the Negative (-) wires together, lead each individual 'bundle' to the enclosure, and from the enclosure to its matching polarity. It does NOT matter which output(s) you choose, because the amp is STILL a monoblock, which implies that the connections come together within.

http://www.the12volt.com/12voltimages/1_4ohm_dvc_2ohm.gif
Reply · Report · Customer SStaff on Feb 2, 2015
· Add Answer · I Have This Question Too (0)
Will this amp be a good fit for 2 Hofonics BRX12D4 in a Honda Civic coupe lx and with this box work? (BRX12D4) is the model number
Mikey on Mar 24, 2016
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Hifonics BRX12D4
Hifonics BRX12D4
Atrend 12DS
Atrend 12DS
Best Answer: I also have stock speakers and was wondering if I could keep those?
Reply · Report · Mikey on Mar 24, 2016
· Add Answer · I Have This Question Too (0)
Will this amp be a good fit for 2 450w 12" Brutus series dual 4 ohm subwoofer?
Mikey on Mar 23, 2016
Best Answer: Hi Michael,

Please provide a proper Model Number so the community can provide an Accurate answer. (not a description)
Reply · Report · Rick MStaff on Mar 23, 2016
· Add Answer · I Have This Question Too (0)
Will this amp push 2 L7 15s at 2000 watts 1000rms?
Reggie B on Mar 17, 2016
Best Answer: Hello Reggie,

Please provide us a proper model number, not a description. Example: Kicker 11S12L74

http://www.sonicelectronix.com/item_31866_Kicker-Solo-Baric-S12L74-11S12L74.html
Reply · Report · Rick MStaff on Mar 17, 2016
· Add Answer · I Have This Question Too (0)
IS IT SAFE TO RUN THIS THIS WITH TWO Audiopipe TXX-BD2-12 wire at 1 ohm final empedance. at 1500 wattz at 2?
jhay1423 on Jan 26, 2016
Best Answer: -IS IT SAFE TO RUN THIS THIS WITH TWO Audiopipe TXX-BD2-12 wire at 1 ohm final empedance.

Yes. You will have the capability of overpowering the setup by 500watts/250watts each, so we stress that you practice restraint when really opening up the power. A proper tune is necessary.

-at 1500 wattz at 2?

We aren't sure what you're asking here.
Reply (1) · Report · Rick MStaff on Jan 27, 2016
· Add Answer · I Have This Question Too (0)
will this amp run a jl 12w7?
Justin S on Nov 2, 2014
Best Answer: Hello Justin,

Yes ; you will likely be getting ~1000w RMS from the amp @ 3ohms. This does tip-toe right along what JL Audio calls the 'Danger Zone', so please make sure you do everything within your power to provide a CLEAN signal and proper power/ground to the amp to obtain that.

http://assets.sonicelectronix.com/images/jlaudio/12w7-powerchart.jpg
Reply · Report · Customer SStaff on Nov 2, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

BRX2000.1D

UPC

806576220695

Weight

15.00lbs

Internal SKU

ls-brx20001d-obc271273

Internal Product ID

123899

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Hifonics Brutus BRX2000.1D