Expert Service 1-661-257-9993 [Hours]

NVX VCW124

1000W 12" VC-Series Dual 4-ohm Car Subwoofer

Out of Stock - Backorder
|

Thanks , You Pay:

$149.99

with warranty

+ FREE Shipping in US 48

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 12" Dual 4-ohm VC-Series Car Subwoofer
  • Power Handling:
    • RMS Power Range: 1000 watts
  • Recommended power range: 850 - 1000 watts RMS
  • Impedance: Dual 4 ohms
  • Woven fiber pressed paper cone
  • Custom High Roll foam surround with Nylon stitching
  • Die Cast aluminum basket for maximum rigidity
  • Dual Poly-Cotton Spiders
  • 3" High Temperature Aluminum Voice coil
  • 195 oz. Triple stacked High Energy magnet motor structure with protective rubber boot
  • Frequency response: 20-200 Hz
  • Resonance Frequency (Fs): 26 Hz
  • Optimal sealed box volume: 0.85 cubic feet
  • Optimal ported box volume: 1.85 cubic feet
  • Top-mount depth: 7.02"
  • Sensitivity: 85dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Additional Information:

Why a 12" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.



Check out the VC-Series Owner's Manual

Tips for Installing the your NVX VCW124 subwoofer


Specifications

Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Height
The height of the item, measured from top to bottom, in inches.
Width
The width of the item from left to right (side-to-side) measured in inches.
Color
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Browse 17 questions and 84 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Have had many of these and they hit hard for the right price
Heidi Rosko on Nov 28, 2016
Power handling and small box size needed. Recommended as a space saving alternative to 2x 12 inch setup.
ben b on Oct 25, 2016
adding another sub
Cornelius T on Nov 1, 2016
the price was right and all the reviews were good on this product. ive been in car audio for over 20 years and needed some subs for my new suburban and ive researched subs for about 6 months now and these came out on top. no other sub matches these in this price range. jl sound quality, excellent spl, and very affordable. these are a smart buy.
james r on Jun 25, 2016
I asked on your facebook page but know one will get back with me on it . The subs this box asked for is only 1.25 cf each total 2.50 CB . If the box says it's over 3CF so is there a type o or that's how it is ?
andrew d on Nov 14, 2014
NVX VCW124
NVX VCW124
NVX VCE212
NVX VCE212
Best Answer: The VCE212 was built specifically to get the most out of the VCW12s. This box is correct. It has been fully engineered from the ground up to maximize the output of the VCW12s

NVX
Reply · Report · Brian MStaff on Nov 18, 2014
· Add Answer · I Have This Question Too (4)
What speaker wire this sub need ? 12/10 or 8 gauge speaker wire ? Thx
Gelu P on Nov 26, 2014
Best Answer: Hi Gelu,

12 gauge wire will be perfect for the VCW124

Let us know if you have any other questions.

NVX
Reply · Report · Brian MStaff on Nov 26, 2014
· Add Answer · I Have This Question Too (2)
How does this sub compare to the alpine type r? Also when will the sub be back in stock?
A shopper on Mar 19, 2015
Best Answer: This sub is very impressive. Funny you ask how they compare to the Alpine type r subs because my buddy has two in a ported box and my single vcw sounds the same, and actually hits those deeper tones better. I have mine in a 1.8 cubic ft. ported box. personally the best sub iv owned so far. Hope this helped.
Reply · Report · zackery k on Mar 19, 2015
· Add Answer · I Have This Question Too (0)
Will they handle the audio pipe 3000 amp?
Reddog on Jun 5, 2016
Best Answer: Yes they love power, they're rated for 1000 watt rms but they'll take much more. I'm running two vcw 124's at 1ohm on a soundstream 4000 watt amp and they do just fine. They pound hard in a 2ft³ ported box at 32hz and the bass is crystal clear. That amp has a little too much power though so just be careful, you should be fine with the 3000 watt.
Reply · Report · Nicholas B on Jun 6, 2016
· Add Answer · I Have This Question Too (0)
A sealed box for this sub is .75cf does that include subwoofer displacement? And out of curiosity does anyone know what that subwoofer displacement is?
conway h on Jun 5, 2015
Best Answer: No it does not include subwoofer displacement. The vcw124 displacement is .11 cubic feet from what I calculated
Reply · Report · Tim S on Jun 5, 2015
· Add Answer · I Have This Question Too (0)
What's the thickest speaker wire gauge these push terminals can swallow?...I was thinking 8... "can't wait until my DC 2k gets here!"
Chuck D on Sep 14, 2014
Best Answer: 12 is enough, I have two 1200watt slash going to two type X, and I think 12 gauge speaker wire is the biggest they make, or maybe 10, anyway 12 is plenty.
Reply · Report · Luciano F on Jan 4, 2016
· Add Answer · I Have This Question Too (0)
Will the 440 watts (@ 2 ohms) in the NVX 900.5 subwoofer channel be enough to power this sub efficiently?
David B on Nov 13, 2015
Best Answer: In my opinion not really, that's barely enough to break in the sub. To run this sub in a ported enclosure efficiently you would need 800-900 watts rms and 1000-1100 watts rms for sealed enclosures. That's after proper break-in time, I usually give new subs 48 hours of play time, but these subs have a stiff suspension so I gave them about 80 hours. I'm using a RF R1200-1d @ 1 ohm tuned to -5 dB. I have the vcw122 in a ported enclosure with 1.88 cu ft after displacement tuned @ 31 hrz sounds amazing, people think I have 15's because of how low and loud it is. Sub and vent facing in the cabin sealed from the trunk.
05 Dodge Stratus r/t coupe set up:

Head unit: pioneer deh-x8600bh
EQ: nvx xeq7
Front stage: infinity ref 6030sc, 2 pairs of crescendo pwx-6, 2 pairs of Polk audio db1001 tweeters
Rear: alpine spr-69
Amp 1: alpine mrv f300 - 4 Polk tweeters
Amp 2: jbl ms-a1004 - infinity and alpine speakers
Amp 3: nvx jad800.4 - 2 pairs of crescendo speakers
Amp 4: Rockford Fosgate r1200.1d
Sub: nvx vcw122
Batteries: optima red top under hood, 2 xs power d975 in trunk
Alternator: 200 amp
Big 3 upgrade: nvx 1/0 gauge OFC cable
Power,ground: nvx 1/0 gauge OFC cable
Cooling: four 5 inch fans
Rca cables: 3 nvx xix27
Speaker wire: nvx 16 and 10 gauge OFC
Remote wires: 12 gauge OFC primary wire
Sound damping: all nvx - doors, whole trunk, roof, floors, rear deck
Fuse holders and distribution blocks: all nvx
All remote wires, fans, led lights power on with relays
Reply · Report · Manuel G on Jan 4, 2016
· Add Answer · I Have This Question Too (0)
why does this have such good ratings, but utilizes high temp alum for coils? Is this beyond my knowledge of basic thermal properties? just sort of confused
A shopper on Apr 5, 2016
Best Answer: Aluminum is an excellent conductor of heat, thus why it is used is almost all radiators. "High Temp" refers to its ability to handle and disperse higher temperatures; they aren't advertising that their sub gets really hot lol. it In terms of being beyond your knowledge of thermal properties..... well this is a basic thermal property so it seems you may need to to rethink your knowledge of basic thermal properties.

This is an great subwoofer for the cost. If you know what you're doing and properly power this sub it will astonish you. Great sound quality and amplitude.
Reply · Report · Dako L on Apr 6, 2016
· Add Answer · I Have This Question Too (0)
hi..i buyed an 12 gauge wire for this sub...i need to wire it to have 2 ohm, becouse i have an monoblock amplifier 2ohm x 1000 wrms...but i have a problem..the wire dont fit the input of the sub...it fit only when the wire is single..but when i but when I connect it together ,positive with positive and negative with negative it dont fit..too large...what to do now'?buy 12 gauge wire?..or maybe there are some accesories to make so that it enters? please help
Gelu P on Sep 15, 2015
Best Answer: Run single wire from both coils straight to the amp, it's got 4 terminal's right. Most sub amps have 4 terminal's
Reply · Report · Luciano F on Jan 4, 2016
· Add Answer · I Have This Question Too (0)
What is the weight on this sub?
mayitodmngz m on Jun 29, 2015
Best Answer: its about 30 pounds
Reply · Report · conway h on Jul 15, 2015
· Add Answer · I Have This Question Too (0)
Hi, it there the difference of sound quality , or of the bass response, or others factors, If when i make the box , the port air is not in the front of box but lateral, as well as the design pre made of Car Audio Fabrications for the sub NVX VCW 12" : 2.00 Cubic Ft @ 32 HZ
17.00 Deep x 32.00 Wide x 14.00 Tall. My questions is : change something if the air will be released laterally and not frontally, I do not know how to explain. I always saw that all the boxes had the front air outlet, but not sideways like that design. ? Thanks very much!
Gelu P on Dec 26, 2014
Best Answer: The design that has a port in the front uses a L shaped port (meaning the air inside the box travels in a L shaped pattern). This is just the most simple design and provides great low end response with minimal distortion. The design I believe you are referencing is similar however is utilizes three chambers to slow down the port velocity which reduces port noise but it doesn't really have a name. It is quite the complicated box and must be done right otherwise lots of distortion can be introduced. A simpler design utilizing a port laterally is a S shaped port (meaning the air will travel in a S shaped pattern). This box design creates the need for a slightly larger box because the port area will be larger meaning net box volume will be lower for the same dimensions as a L shaped design. The S shaped port is a great option if you have the space, cleaner bass, and less port noise. The subwoofer is also mounted on the top versus on the side and the port can either come out the left or right side of the box versus the front. Make sure that each port wall is of equal size and is not too small to avoid forming a straight line to the port, this will cause lots of distortion and port noise and will basically make the sub sound terrible. I personally use a L shaped port for my vcw124 and it sounds great and is very loud. I called the manufacturer and they recommend 1.75-2.75 cubic feet and tuned 30-34hz. Mine is 2.2 cubes tuned at 33hz hits all way down to 20hz and makes my ears hurt at full tilt. Hope this helps!
Reply · Report · Tim S on Dec 27, 2014
· Add Answer · I Have This Question Too (0)
How would this sub sound in a 1.25 Cu Ft sealed box? Or would that be a bad Idea?
Kev2087 on Jun 11, 2015
Best Answer: That is slightly too large of a sealed box for this subwoofer. .75 cu ft would be the recommended size for a sealed box as per manufacturer. 1.25 cu ft would be ideal for a ported box. It is recommended to stick to those sizes.
Reply · Report · Christopher B on Jun 11, 2015
· Add Answer · I Have This Question Too (0)
optimum ported box specs?
A shopper on Oct 1, 2014
Best Answer: 3.12 ft ported tuned to 34hz
Minus sub and port displacement.
In that box the sub will get low and hit highs all with very accurate bass reponse. Can't speak for the durability of this sub but it sounds really great
Reply · Report · Dillan M on Oct 2, 2014
· Add Answer · I Have This Question Too (0)
What is the displacement of this sub reversed?
Manuel G on Jan 4, 2016
Best Answer: i would find the displacement from a similar sub and use those specs, because I can't find anything in the manual. I need to no what size port to use, or if I can vent the box. I'll probably call NVX. Sorry I couldn't be more helpful.
Reply · Report · Luciano F on Jan 4, 2016
· Add Answer · I Have This Question Too (0)
What amplifier wiring kit i need ? I like 1/0 gauge...but i'm confused..i think to push it with RE Audio ZTX 3000.1 D , it's is powerful ? What you recommend?
Gelu P on Nov 27, 2014
Best Answer: Hello Gelu,

The RE Audio ZTX-3000.1 is a Great match for the VCW124! [2 ohms: 1000 watts x 1 chan.] . 1k is well within needing AT LEAST 4 Gauge. Especially if the distance from the Battery to the Amp is minimal. We always suggest OFC Wiring for such a setup; Preferably the NVX XKIT42 or NVX XKIT02.
NVX XKIT42
NVX XKIT42
NVX XKIT02
NVX XKIT02
Reply · Report · Customer SStaff on Nov 27, 2014
· Add Answer · I Have This Question Too (0)
Can anyone measure and tell me the diameter of the magnet on this sub? Thanks.
Joshua C on Nov 5, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

VCW124

Weight

10.00lbs

Internal SKU

ls-vcw124-obc274523

Internal Product ID

124047

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX VCW124