Expert Service 1-661-257-9993 [Hours]

Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING

2000W 2-Channel Mean Machine Series Car Amplifier

In Stock. Only 1 Left!
|

List price $239.99

You Save: $167.00 (69.59%)

Thanks , You Pay:

$72.99

with warranty

+ FREE Shipping in US 48

Order within 70 hrs 8 mins to ship 12/5

Arrives by Wednesday, Dec. 7 to zip 20147

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING

2000W 2-Channel Mean Machine Series Car Amplifier

$72.99

Keep Shopping

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$15.99

Add
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$69.99

Add
270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

$448.89

Add

Don't see the accessory you're looking for?
View all available accessories for the Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING.

Get FAST answers from customers ASK a Question See questions answers

Autotek Audio Store

Item Condition: Like New

  • Like new Damaged Package:
    • General Features:

      • 2-Channel Mean Machine Series Car Amplifier
      • Max Power Rating:
        • 4 ohms: 500 watts x 2 chan.
        • 2 ohms: 1000 watts x 2 chan.
        • Bridged, 4 ohms: 2000 watts x 1 chan.
      • Total power output: 2000 watts
      • Pro- Fi High Speed MOSFET's
      • Auto-Step PWM MOSFET Power Supply
      • ROAD WORTHYTM TCID
      • Fully Adjustable Pro-Design Crossovers
      • Bass Thrust - Variable Bass Equalization
      • LED power (green) and protect (red) indicators
      • Mono/2 channel operation
      • High-level speaker inputs
      • Preamp RCA outputs to daisy chain multiple amps
      • 3-way protection circuitry (thermal, overload, and speaker short protection)
      • Heavy duty aluminum alloy heat-sink
      • Input sensitivity: 200 mV - 6 V
      • Variable Bass Boost: 0 to +9dB
      • Selectable crossover mode: Full / LPF / HPF
      • Variable high-pass filter: 60 - 1,200 Hz
      • Variable low-pass filter: 30 - 250 Hz
      • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
      • Dimensions: 9.90"W x 12.30"L x 2.40"H
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

    Power Specifications - Full Range Channels

    Peak Power @ 4 ohms
    This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

    Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

    500 watts x 2 channels
    Peak Power @ 2 ohms
    This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

    Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

    1000 watts x 2 channels
    Bridged Peak/Max Power

    Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

    Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

    2000 watts x 1 channels

    Amplifier Specifications

    Amplifier Series
    This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
    Mean Machine (Autotek)
    Number of Channels
    Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
    2
    Total Peak Power Output
    The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

    It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

    The RMS power rating is more accurate, and we recommend using it for product comparison.

    2000 watts
    Minimum Impedance Unbridged
    The lowest impedance the amplifier will handle when it is not bridged.
    2 ohms
    Minimum Impedance Bridged
    The lowest impedance the amplifier will handle when it is bridged.
    4 ohms
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    Yes - with included adapter
    Preamp Outputs
    Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
    1 pair
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    High-Pass (HP)
    Full (AP)
    High-Pass Crossover Frequency
    The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    60 - 1,200 Hz
    Low-Pass Crossover Frequency
    The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    30 - 250 Hz
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    No
    Strappable
    Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
    No
    CEA-2006 Compliant
    Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
    • RMS Power
    • Signal-to-Noise Ratio

    This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

    No
    Sonic Certified Amplifier
    Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
    Not Tested
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX XWS1625 16 AWG Speaker Wire

    25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $15.99

    Belva BBSW127 12 AWG Speaker Wire

    12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $14.99

    Belva BBSW167 16 AWG Speaker Wire

    16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $12.99

    NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

    Comes with everything you need to upgrade your power and ground wire.

    Your Price $69.99

    Belva BBG3KT CCA 1/0 Gauge Big Three Kit

    Features everything needed to upgrade factory power and ground wire.

    Your Price $34.99

    XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

    1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

    Your Price $92.52

    270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

    Most Popular! 270+ amps at anything above 1800 rpm engine speed!

    Your Price $448.89

    240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

    240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

    Your Price $399.00

    240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

    Specifically designed to fit in tight spaces

    Your Price $399.00

    250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

    Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

    Your Price $399.99

    240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

    6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

    Your Price $399.00

    240 Amp S Series Alternator for 2011 Toyota Corolla

    Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

    Your Price $399.99

    240 Amp S Series Alternator for 2006-2011 Honda Civic

    15% more efficient than typical alternators

    Your Price $549.99

    370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

    WOW 370 AMPS! Elite series offers the highest possible amperage

    Your Price $699.00

    320 Amp S Series Alternator for Custom and Racing Applications

    Great for a Custom Project

    Your Price $499.00

    NVX XTGSP2

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Scosche TK12

    The perfect kit for installing a car stereo and amplifier for the first time

    Your Price $18.99

    Universal Wire Puller

    Make your installation less of a chore and save yourself the stretch

    Your Price $7.99

    8 Gauge Ring Terminals, 5/16" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $1.99

    0/1 Gauge Ring Terminals, 3/8" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $4.99

    PRO Series Classic Short GM Battery Post Shoc-Krome

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $4.99

    PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $6.99

    200 Amp Relay Isolator (BIR200)

    Great for isolating a second batter making it dedicated to the stereo system

    Your Price $39.99

    120 Amp 4-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $69.97

    240 AMP 3-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $124.60

    World's Smallest AFS / Mini ANL Fuse Holder

    Accepts 4 gauge or 8-gauge wire

    Your Price $12.99

    ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

    No-fail termination and current flow, it helps keep your system protected and running smoothly

    Your Price $19.99

    4 Pack of 80 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 100 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 150 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

    Your Price $3.99

    2 Pack of 200 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 200 Amp ANL Fuses

    Your Price $2.99

    2 Pack of 300 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 300 Amp ANL Fuses

    Your Price $2.99

    Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

    Great for amplifiers that do not accept a large gauge power wire

    Your Price $5.99

    Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

    Great for amplifiers that do not accept large gauge power wire

    Your Price $6.95

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-MMA2000.2-LNDP

    UPC

    806576224211

    Weight

    7.30lbs

    Internal SKU

    LS-mma20002-LNDP

    Internal Product ID

    125717

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING