Expert Service 1-661-257-9993 [Hours]

2 Pack of Kicker 07C104

Pair of 10" Single 4 ohm Comp Series C104 C10 Subwoofers

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

2 Pack of Kicker 07C104

Pair of 10" Single 4 ohm Comp Series C104 C10 Subwoofers

$74.91

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$7.99
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the 2 Pack of Kicker 07C104.

Get FAST answers from customers ASK a Question See questions answers

Huge Bass on a Budget

Who says that you have to spend a lot of money to get some solid bass in your car? The Kicker Comp subwoofer is the perfect subwoofer for those that want some quality subs without breaking the bank.

The Kicker Comp subwoofer incorporates sturdy materials, great looks, and Kicker engineering to produce a subwoofer with fantastic bass. The vacuum formed polymineral cone and polyfoam ribbed surround are double stitched together for the ultimate in durability and strength. The Inverted Structural Dome (ISD) is designed to eliminate unwanted flex in the cone, resulting in clearer and deeper bass. The genius engineers at Kicker have also designed this incredible woofer to work in sealed and vented enclosures, as well as free-air applications. Along the spider you will find the Kicker's Spiralead tinsel-leads, allowing for greater strength and durability of the woofer. Don't let the price on this woofer fool you. You are going to get solid bass with a woofer that is going to last a long time.

  • 2 Single 4 Ohm 10" Competition Series Subwoofers
  • Power Handling:
    • Peak: 600 watts per pair / 300 watts each
    • RMS: 300 watts per pair / 150 watts each
  • Vacuum Formed Polymineral Cone with ISD (Inverted Structural Dome)
  • Optimized Polyfoam Ribbed Surround
  • Rear Cone Brace
  • High-Temp Polyimide Film Voice Coil Former
  • Sleeved high-Power Tinsel Lead Wire
  • Spring-Loaded Nickel Plated Terminals
  • Two-Piece Vented Hyper-Extended Blackened Pole Piece and Backplate
  • 45oz. Magnet structure
  • Marine ready
  • Other search terms: C10 4 ohms, C104, 07C10, Comp 10"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts per pair / 300 watts each
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts per pair / 150 watts each
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
30 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87.3 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
9.76 mm
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polymineral
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Ribbed Poly-Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.

Recommended Enclosure Specifications

Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
2.4 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.75 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
4-13/16"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-1/4"

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
67%
4 Star
33%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.5
Design
4.8
Usability
5.0
Grizzy

Oroville, CA

Overall
Durability
Value
Features
Design
Usability
love em

February 14, 2010

these subs are sick. for the price, you cant beat them. i have a single cab p/u so i am pretty short on space. i fit 2 of these behind the seat in a sonic sub box. hooked up to a kicker zx300.1 and wow... so loud. i had to turn my gain down to about a quarter on the amp. amazing. super stoked. sonic was really fast with the shipping too
great buy(=

1 of 2 found this helpful

Was this review helpful to you?

Jeremy

Questa, NM

Overall
Durability
Value
Features
Design
Usability
awesome subs

January 20, 2010

i bought a pair and they were great. i had them hooked up to a jensen 300 watt amp and they really hit good. they are perfect if you like bass with allot of THUMP and also blend nicely with other kinds of music. i would recommend these to any one who want allot of clean bass for really cheap!

1 of 2 found this helpful

Was this review helpful to you?

David

Biloxi, MS

Overall
Durability
Value
Features
Design
Usability
awesome sub, awesome sound, awesome price

September 9, 2009

It says these subs max at 300 each and 600 together. i have two of them on a one thousand watt amp and they take every bit of it. They are in a custom made ported box, which is close to 3 and a half cubes. These subs are really good if you want good clean solid bass. I completely recommend this sub. I am about to order another set, one for my friend and the other for me. Kicker beats: livin' loud all the way.

1 of 2 found this helpful

Was this review helpful to you?

Sam

Eupora, MS

Overall
Durability
Value
Features
Design
Usability
amazing beat for the price

September 8, 2009

I bought these subs to get some best for a cheap price and they were bangin straight out the box! I hooked them up to a boss chaos exxtreme 2000 watts at 300 watts and it is awesome! I got them broke in now and it is crazy loud! I recommend these subs to anyone they are slammin!

1 of 2 found this helpful

Was this review helpful to you?

Brady

DeRidder, LA

Overall
Durability
Value
Features
Design
Usability
cant beat em for the price.

August 27, 2009

ive owned 3 sets of these. if you put them in the right box, these woofers will surprise you. i just purchased a pair to put in my wifes car and put them in a Super Bass Pro Box, running them off a kicker zx 350.2 and its pretty loud for 2 lower end 10 inch woofers. im very pleased, for the third time. kicker makes a great product.

1 of 2 found this helpful

Was this review helpful to you?

lucas

huntington, WV

Overall
Durability
Value
Features
Design
Usability
great subs

July 9, 2009

i bought 2 sets of these for me and my friend.this product is great. i haven't put them in a box yet but for free air they are amazing. i have these on a 08 zx300.1 and it is a good match. i recommend this product for anyone wanting loud good quality bass. sonics got them to me on time and were very well to work with.

pros: sound top. good deal.

cons: none =]

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

20 Ft. of Kicker 12 Gauge Speaker Wire

Get true gauge Kicker speaker wire to match your Kicker subwoofer!

Your Price $39.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.87

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $87.63

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.97

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

07C104-2-Sub-Package

Weight

20.00lbs

Internal SKU

2subs_07c104

Internal Product ID

13255

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 2 Pack of Kicker 07C104